470 research outputs found
Digital implementation of the cellular sensor-computers
Two different kinds of cellular sensor-processor architectures are used nowadays in various
applications. The first is the traditional sensor-processor architecture, where the sensor and the
processor arrays are mapped into each other. The second is the foveal architecture, in which a
small active fovea is navigating in a large sensor array. This second architecture is introduced
and compared here. Both of these architectures can be implemented with analog and digital
processor arrays. The efficiency of the different implementation types, depending on the used
CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use
digital implementation rather than analog
An Energy and Performance Exploration of Network-on-Chip Architectures
In this paper, we explore the designs of a circuit-switched router, a wormhole router, a quality-of-service (QoS) supporting virtual channel router and a speculative virtual channel router and accurately evaluate the energy-performance tradeoffs they offer. Power results from the designs placed and routed in a 90-nm CMOS process show that all the architectures dissipate significant idle state power. The additional energy required to route a packet through the router is then shown to be dominated by the data path. This leads to the key result that, if this trend continues, the use of more elaborate control can be justified and will not be immediately limited by the energy budget. A performance analysis also shows that dynamic resource allocation leads to the lowest network latencies, while static allocation may be used to meet QoS goals. Combining the power and performance figures then allows an energy-latency product to be calculated to judge the efficiency of each of the networks. The speculative virtual channel router was shown to have a very similar efficiency to the wormhole router, while providing a better performance, supporting its use for general purpose designs. Finally, area metrics are also presented to allow a comparison of implementation costs
Design and implementation of NoC routers and their application to Prdt-based NoC\u27s
With a communication-centric design style, Networks-on-Chips (NoCs) emerges as a new paradigm of Systems-on-Chips (SoCs) to overcome the limitations of bus-based communication infrastructure. An important problem in the design of NoCs is the router design, which has great impact on the cost and performance of a NoC system. This thesis is focused on the design and implementation of an optimized parameterized router which can be applied in mesh/torus-based and Perfect Recursive Diagonal Torus (PRDT)-based NoCs; In specific, the router design includes the design and implementation of two routing algorithms (vector routing and circular coded vector routing), the wormhole switching scheme, the scheduling scheme, buffering strategy, and flow control scheme. Correspondingly, the following components are designed and implemented: input controller, output controller, crossbar switch, and scheduler. Verilog HDL codes are generated and synthesized on ASIC platforms. Most components are designed in parameterized way. Performance evaluation of each component of the router in terms of timing, area, and power consumption is conducted. The efficiency of the two routing algorithms and tradeoff between computational time (tsetup) and area are analyzed; To reduce the area cost of the router design, the two major components, the crossbar switch and the scheduler, are optimized. Particularly, for crossbar switch, a comparative study of two crossbar designs is performed with the aid of Magic Layout editor, Synopsys CosmosSE and Awaves; Based on the router design, the PRDT network composed of 4x4 routers is designed and synthesized on ASIC platforms
Energy Model of Networks-on-Chip and a Bus
A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a near optimal run-time mapping (from an energy point of view) of inter-process communication to NoC link
Design of TSV-sharing topologies for cost-effective 3D networks-on-chip
The Through-Silicon Via (TSV) technology has led to major breakthroughs in 3D stacking by providing higher speed and bandwidth, as well as lower power dissipation for the inter-layer communication. However, the current TSV fabrication suffers from a considerable area footprint and yield loss. Thus, it is necessary to restrict the number of TSVs in order to design cost-effective 3D on-chip networks. This critical issue can be addressed by clustering the network such that all of the routers within each cluster share a single TSV pillar for the vertical packet transmission. In some of the existing topologies, additional cluster routers are augmented into the mesh structure to handle the shared TSVs. However, they impose either performance degradation or power/area overhead to the system. Furthermore, the resulting architecture is no longer a mesh. In this paper, we redefine the clusters by replacing some routers in the mesh with the cluster routers, such that the mesh structure is preserved. The simulation results demonstrate a better equilibrium between performance and cost, using the proposed models
Mppsocgen: A framework for automatic generation of mppsoc architecture
Automatic code generation is a standard method in software engineering since
it improves the code consistency and reduces the overall development time. In
this context, this paper presents a design flow for automatic VHDL code
generation of mppSoC (massively parallel processing System-on-Chip)
configuration. Indeed, depending on the application requirements, a framework
of Netbeans Platform Software Tool named MppSoCGEN was developed in order to
accelerate the design process of complex mppSoC. Starting from an architecture
parameters design, VHDL code will be automatically generated using parsing
method. Configuration rules are proposed to have a correct and valid VHDL
syntax configuration. Finally, an automatic generation of Processor Elements
and network topologies models of mppSoC architecture will be done for Stratix
II device family. Our framework improves its flexibility on Netbeans 5.5
version and centrino duo Core 2GHz with 22 Kbytes and 3 seconds average
runtime. Experimental results for reduction algorithm validate our MppSoCGEN
design flow and demonstrate the efficiency of generated architectures.Comment: 16 pages; International Journal of Computer Science & Information
Technology (IJCSIT) Vol 4, No 2, April 201
Implementation and Evaluation of an NoC Architecture for FPGAs
The Networks-on-Chip (NoC) approach for designing Systems-on-Chip (SoC) is currently emerging as an advanced concept for overcoming the scalability and efficiency problems of traditional bus-based systems. A great deal of theoretical research has been done in this area that provides good insight and shows promising results. There is a great need for research in hardware implementation of NoC-based systems to determine the feasibility of implementing various topologies and protocols, and also to accurately determine what design tradeoffs are involved in NoC implementation. This thesis addresses the challenges of implementing an NoC-based system on FPGAs for running real benchmark applications. The NoC used a mesh topology and circuit-switched communication protocol. An experimental framework was developed that allowed implementation of NoC-based system from a high level specification, using the Celoxica Handel-C hardware description language. Two test applications: charged couple device (CCD) and JPEG were developed in Handel-C to be used as our benchmark applications. Both benchmarks are computational expensive and require large quantities of data transfer that will test the NoC system. Implementation results show that the NoC-based system gives superior area utilization and speed performance compared to the bus-based system, running the same benchmarks
Exploration and Design of Power-Efficient Networked Many-Core Systems
Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level.
From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by todayâs and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques.
From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented.
Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast
- âŠ