9,240 research outputs found
Ordered Tomlinson-Harashima Precoding in G.fast Downstream
G.fast is an upcoming next generation DSL standard envisioned to use
bandwidth up to 212 MHz. Far-end crosstalk (FEXT) at these frequencies greatly
overcomes direct links. Its cancellation based on non-linear
Tomlinson-Harashima Precoding (THP) proved to show significant advantage over
standard linear precoding. This paper proposes a novel THP structure in which
ordering of successive interference pre-cancellation can be optimized for
downstream with non-cooperating receivers. The optimized scheme is compared to
existing THP structure denoted as equal-rate THP which is widely adopted in
wireless downlink. Structure and performance of both methods differ
significantly favoring the proposed scheme. The ordering that maximizes the
minimum rate (max-min fairness) for each tone of the discrete multi-tone
modulation is the familiar V-BLAST ordering. However, V-BLAST does not lead to
the global maximum when applied independently on each tone. The proposed novel
Dynamic Ordering (DO) strategy takes into account asymmetric channel statistics
to yield the highest minimum aggregated rate.Comment: 7 pages, 11 figures, Accepted at the 2015 IEEE Globecom 2015,
Selected Areas in Communications: Access Networks and Systems, 6-10 December,
201
Two-Layered Superposition of Broadcast/Multicast and Unicast Signals in Multiuser OFDMA Systems
We study optimal delivery strategies of one common and independent
messages from a source to multiple users in wireless environments. In
particular, two-layered superposition of broadcast/multicast and unicast
signals is considered in a downlink multiuser OFDMA system. In the literature
and industry, the two-layer superposition is often considered as a pragmatic
approach to make a compromise between the simple but suboptimal orthogonal
multiplexing (OM) and the optimal but complex fully-layered non-orthogonal
multiplexing. In this work, we show that only two-layers are necessary to
achieve the maximum sum-rate when the common message has higher priority than
the individual unicast messages, and OM cannot be sum-rate optimal in
general. We develop an algorithm that finds the optimal power allocation over
the two-layers and across the OFDMA radio resources in static channels and a
class of fading channels. Two main use-cases are considered: i) Multicast and
unicast multiplexing when users with uplink capabilities request both
common and independent messages, and ii) broadcast and unicast multiplexing
when the common message targets receive-only devices and users with uplink
capabilities additionally request independent messages. Finally, we develop a
transceiver design for broadcast/multicast and unicast superposition
transmission based on LTE-A-Pro physical layer and show with numerical
evaluations in mobile environments with multipath propagation that the capacity
improvements can be translated into significant practical performance gains
compared to the orthogonal schemes in the 3GPP specifications. We also analyze
the impact of real channel estimation and show that significant gains in terms
of spectral efficiency or coverage area are still available even with
estimation errors and imperfect interference cancellation for the two-layered
superposition system
Communication Through Collisions: Opportunistic Utilization of Past Receptions
When several wireless users are sharing the spectrum, packet collision is a
simple, yet widely used model for interference. Under this model, when
transmitters cause interference at any of the receivers, their collided packets
are discarded and need to be retransmitted. However, in reality, that receiver
can still store its analog received signal and utilize it for decoding the
packets in the future (for example, by successive interference cancellation
techniques). In this work, we propose a physical layer model for wireless
packet networks that allows for such flexibility at the receivers. We assume
that the transmitters will be aware of the state of the channel (i.e. when and
where collisions occur, or an unintended receiver overhears the signal) with
some delay, and propose several coding opportunities that can be utilized by
the transmitters to exploit the available signal at the receivers for
interference management (as opposed to discarding them). We analyze the
achievable throughput of our strategy in a canonical interference channel with
two transmitter-receiver pairs, and demonstrate the gain over conventional
schemes. By deriving an outer-bound, we also prove the optimality of our scheme
for the corresponding model.Comment: Accepted to IEEE INFOCOM 2014. arXiv admin note: text overlap with
arXiv:1301.530
INTERFERENCE MANAGEMENT IN LTE SYSTEM AND BEYOUND
The key challenges to high throughput in cellular wireless communication system are interference, mobility and bandwidth limitation. Mobility has never been a problem until recently, bandwidth has been constantly improved upon through the evolutions in cellular wireless communication system but interference has been a constant limitation to any improvement that may have resulted from such evolution. The fundamental challenge to a system designer or a researcher is how to achieve high data rate in motion (high speed) in a cellular system that is intrinsically interference-limited.
Multi-antenna is the solution to data on the move and the capacity of multi-antenna system has been demonstrated to increase proportionally with increase in the number of antennas at both transmitter and receiver for point-to-point communications and multi-user environment. However, the capacity gain in both uplink and downlink is limited in a multi-user environment like cellular system by interference, the number of antennas at the base station, complexity and space constraint particularly for a mobile terminal.
This challenge in the downlink provided the motivation to investigate successive interference cancellation (SIC) as an interference management tool LTE system and beyond. The Simulation revealed that ordered successive interference (OSIC) out performs non-ordered successive interference cancellation (NSIC) and the additional complexity is justified based on the associated gain in BER performance of OSIC. The major drawback of OSIC is that it is not efficient in network environment employing power control or power allocation. Additional interference management techniques will be required to fully manage the interference.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Artificial Noise-Aided Biobjective Transmitter Optimization for Service Integration in Multi-User MIMO Gaussian Broadcast Channel
This paper considers an artificial noise (AN)-aided transmit design for
multi-user MIMO systems with integrated services. Specifically, two sorts of
service messages are combined and served simultaneously: one multicast message
intended for all receivers and one confidential message intended for only one
receiver and required to be perfectly secure from other unauthorized receivers.
Our interest lies in the joint design of input covariances of the multicast
message, confidential message and artificial noise (AN), such that the
achievable secrecy rate and multicast rate are simultaneously maximized. This
problem is identified as a secrecy rate region maximization (SRRM) problem in
the context of physical-layer service integration. Since this bi-objective
optimization problem is inherently complex to solve, we put forward two
different scalarization methods to convert it into a scalar optimization
problem. First, we propose to prefix the multicast rate as a constant, and
accordingly, the primal biobjective problem is converted into a secrecy rate
maximization (SRM) problem with quality of multicast service (QoMS) constraint.
By varying the constant, we can obtain different Pareto optimal points. The
resulting SRM problem can be iteratively solved via a provably convergent
difference-of-concave (DC) algorithm. In the second method, we aim to maximize
the weighted sum of the secrecy rate and the multicast rate. Through varying
the weighted vector, one can also obtain different Pareto optimal points. We
show that this weighted sum rate maximization (WSRM) problem can be recast into
a primal decomposable form, which is amenable to alternating optimization (AO).
Then we compare these two scalarization methods in terms of their overall
performance and computational complexity via theoretical analysis as well as
numerical simulation, based on which new insights can be drawn.Comment: 14 pages, 5 figure
Joint Unitary Triangularization for MIMO Networks
This work considers communication networks where individual links can be
described as MIMO channels. Unlike orthogonal modulation methods (such as the
singular-value decomposition), we allow interference between sub-channels,
which can be removed by the receivers via successive cancellation. The degrees
of freedom earned by this relaxation are used for obtaining a basis which is
simultaneously good for more than one link. Specifically, we derive necessary
and sufficient conditions for shaping the ratio vector of sub-channel gains of
two broadcast-channel receivers. We then apply this to two scenarios: First, in
digital multicasting we present a practical capacity-achieving scheme which
only uses scalar codes and linear processing. Then, we consider the joint
source-channel problem of transmitting a Gaussian source over a two-user MIMO
channel, where we show the existence of non-trivial cases, where the optimal
distortion pair (which for high signal-to-noise ratios equals the optimal
point-to-point distortions of the individual users) may be achieved by
employing a hybrid digital-analog scheme over the induced equivalent channel.
These scenarios demonstrate the advantage of choosing a modulation basis based
upon multiple links in the network, thus we coin the approach "network
modulation".Comment: Submitted to IEEE Tran. Signal Processing. Revised versio
- …