960 research outputs found
A nonlinear disturbance observer for robotic manipulators
A new nonlinear disturbance observer (NDO) for robotic manipulators is derived in this paper. The global exponential stability of the proposed disturbance observer (DO) is guaranteed by selecting design parameters, which depend on the maximum velocity and physical parameters of robotic manipulators. This new observer overcomes the disadvantages of existing DOs, which are designed or analyzed by linear system techniques. It can be applied in robotic manipulators for various purposes such as friction compensation, independent joint control, sensorless torque control and fault diagnosis. The performance of the proposed observer is demonstrated by the friction estimation and compensation for a two-link robotic manipulator. Both simulation and experimental results show the NDO works well
Model learning for trajectory tracking of robot manipulators
Abstract
Model based controllers have drastically improved robot performance, increasing task accuracy while reducing control effort. Nevertheless, all this was realized with a very strong assumption: the exact knowledge of the physical properties of both the robot and the environment that surrounds it. This assertion is often misleading: in fact modern robots are modeled in a very approximate way and, more important, the environment is almost never static and completely known. Also for systems very simple, such as robot manipulators, these assumptions are still too strong and must be relaxed. Many methods were developed which, exploiting previous experiences, are able to refine the nominal model: from classic identification techniques to more modern machine learning based approaches. Indeed, the topic of this thesis is the investigation of these data driven techniques in the context of robot control for trajectory tracking. In the first two chapters, preliminary knowledge is provided on both model based controllers, used in robotics to assure precise trajectory tracking, and model learning techniques. In the following three chapters, are presented the novelties introduced by the author in this context with respect to the state of the art: three works with the same premise (an inaccurate system modeling), an identical goal (accurate trajectory tracking control) but with small differences according to the specific platform of application (fully actuated, underactuated, redundant robots). In all the considered architectures, an online learning scheme has been introduced to correct the nominal feedback linearization control law. Indeed, the method has been primarily introduced in the literature to cope with fully actuated systems, showing its efficacy in the accurate tracking of joint space trajectories also with an inaccurate dynamic model. The main novelty of the technique was the use of only
kinematics information, instead of torque measurements (in general very noisy), to online retrieve and compensate the dynamic mismatches. After that the method has
been extended to underactuated robots. This new architecture was composed by an online learning correction of the controller, acting on the actuated part of the system
(the nominal partial feedback linearization), and an offline planning phase, required to realize a dynamically feasible trajectory also for the zero dynamics of the system.
The scheme was iterative: after each trial, according to the collected information, both the phases were improved and then repeated until the task achievement. Also in this case the method showed its capability, both in numerical simulations and on real experiments on a robotics platform. Eventually the method has been applied to redundant systems: differently from before, in this context the task consisted in the accurate tracking of a Cartesian end effector trajectory. In principle very similar to the fully actuated case, the presence of redundancy slowed down drastically the learning machinery convergence, worsening the performance. In order to cope with this, a redundancy resolution was proposed that, exploiting an approximation of the learning algorithm (Gaussian process regression), allowed to locally maximize the information and so select the most convenient self motion for the system; moreover, all of this was realized with just the resolution of a quadratic programming problem. Also in this case the method showed its performance, realizing an accurate online tracking while reducing both the control effort and the joints velocity, obtaining so a natural behaviour. The thesis concludes with summary considerations on the proposed approach and with possible future directions of research
Contact-Implicit Trajectory Optimization Based on a Variable Smooth Contact Model and Successive Convexification
In this paper, we propose a contact-implicit trajectory optimization (CITO)
method based on a variable smooth contact model (VSCM) and successive
convexification (SCvx). The VSCM facilitates the convergence of gradient-based
optimization without compromising physical fidelity. On the other hand, the
proposed SCvx-based approach combines the advantages of direct and shooting
methods for CITO. For evaluations, we consider non-prehensile manipulation
tasks. The proposed method is compared to a version based on iterative linear
quadratic regulator (iLQR) on a planar example. The results demonstrate that
both methods can find physically-consistent motions that complete the tasks
without a meaningful initial guess owing to the VSCM. The proposed SCvx-based
method outperforms the iLQR-based method in terms of convergence, computation
time, and the quality of motions found. Finally, the proposed SCvx-based method
is tested on a standard robot platform and shown to perform efficiently for a
real-world application.Comment: Accepted for publication in ICRA 201
Toward autonomous spacecraft
Ways in which autonomous behavior of spacecraft can be extended to treat situations wherein a closed loop control by a human may not be appropriate or even possible are explored. Predictive models that minimize mean least squared error and arbitrary cost functions are discussed. A methodology for extracting cyclic components for an arbitrary environment with respect to usual and arbitrary criteria is developed. An approach to prediction and control based on evolutionary programming is outlined. A computer program capable of predicting time series is presented. A design of a control system for a robotic dense with partially unknown physical properties is presented
Modelling and control of a 2-DOF planar parallel manipulator for semiconductor packaging systems
A novel direct-drive planar parallel manipulator for high-speed and high-precision semiconductor packaging systems is presented. High precision kinematics design, significant redaction on moving mass and driving power of the actuators over traditional XY motion stages are the benefits of the proposed manipulator. The mathematical model of the manipulator is obtained using the Newton-Enter method and a practical model-based control design approach is employed to design the PID computed-torque controller. Experimental results demonstrate that the proposed planar parallel manipulator has significant improvements on motion performance in terms of positioning accuracy, settling time and stability when compared with traditional XY stages. This shows that the proposed planar parallel manipulator can provide a superior alternative for replacing traditional XY motion stages in high precision low-payload applications. © 2005 IEEE.published_or_final_versio
Modeling, Stability Analysis, and Testing of a Hybrid Docking Simulator
A hybrid docking simulator is a hardware-in-the-loop (HIL) simulator that
includes a hardware element within a numerical simulation loop. One of the
goals of performing a HIL simulation at the European Proximity Operation
Simulator (EPOS) is the verification and validation of the docking phase in an
on-orbit servicing mission.....Comment: 30 papge
- …