Improving Third-Party Relaying for LTE-A: A Realistic Simulation Approach

In this article we propose solutions to diverse conflicts that result from the deployment of the (still immature) relay node (RN) technology in LTE-A networks. These conflicts and their possible solutions have been observed by implementing standard-compliant relay functionalities on the Vienna simulator. As an original experimental approach, we model realistic RN operation, taking into account that transmitters are not active all the time due to half-duplex RN operation. We have rearranged existing elements in the simulator in a manner that emulates RN behavior, rather than implementing a standalone brand-new component for the simulator. We also study analytically some of the issues observed in the interaction between the network and the RNs, to draw conclusions beyond simulation observation. The main observations of this paper are that: $i$) Additional time-varying interference management steps are needed, because the LTE-A standard employs a fixed time division between eNB-RN and RN-UE transmissions (typical relay capacity or throughput research models balance them optimally, which is unrealistic nowadays); $ii$) There is a trade-off between the time-division constraints of relaying and multi-user diversity; the stricter the constraints on relay scheduling are, the less flexibility schedulers have to exploit channel variation; and $iii$) Thee standard contains a variety of parameters for relaying configuration, but not all cases of interest are covered.Comment: 17 one-column pages, 9 figures, accepted for publication in IEEE ICC 2014 MW

Enhanced Inter-Cell Interference Coordination Challenges in Heterogeneous Networks

3GPP LTE-Advanced has started a new study item to investigate Heterogeneous Network (HetNet) deployments as a cost effective way to deal with the unrelenting traffic demand. HetNets consist of a mix of macrocells, remote radio heads, and low-power nodes such as picocells, femtocells, and relays. Leveraging network topology, increasing the proximity between the access network and the end-users, has the potential to provide the next significant performance leap in wireless networks, improving spatial spectrum reuse and enhancing indoor coverage. Nevertheless, deployment of a large number of small cells overlaying the macrocells is not without new technical challenges. In this article, we present the concept of heterogeneous networks and also describe the major technical challenges associated with such network architecture. We focus in particular on the standardization activities within the 3GPP related to enhanced inter-cell interference coordination.Comment: 12 pages, 4 figures, 2 table

Design of a Quality of Service-Based Load Balancing Relay Selection Mechanism for Long Term Evolution-Advanced Systems

Serving as the fourth generation mobile communication standard, Long Term Evolution-Advanced provides various technical support to achieve high transmission speed. In particular, relays are an essential technology supported by the standard. Because a relay uses the resources within a communication system, user devices adopt the optimal relay method as the transmission pathway to optimize resource utilization. According to the quality of service required by various user applications, this paper fabricates a method for selecting the optimal load-balancing transmission pathway for user devices

Uplink CoMP Capability Improvements In Heterogeneous Cellular Networks

LTE-Advanced meets the challenge raised by powerful, mobile devices and bandwidth-hungry applications by investing in solutions such as carrier aggregation, higher order MIMO, relay nodes and Coordinated Multipoint (CoMP) transmission/reception. The latter, in particular, is envisioned to be one of the most important techniques in LTE-Advanced to improve the throughput and functionality of cell borders. CoMP allows users to have multiple data transmission and reception from/toward multiple cooperating eNodeBs (eNBs), increasing the utilization factor of the network. Resource allocation in the uplink is especially beneficial because more sophisticated algorithms can leverage the availability of additional connection points where the signal from the User Equipment (UE) is processed, ultimately providing UEs with increased throughput. Additionally, a significant part of the interference caused by neighboring cells can be seen as a useful received signal thanks to CoMP, provided those cells are part of the Coordinated Reception Point (CRP) set. This is especially important in critical regions, in terms of interference, like cell edges. Finally, in the case of joint multi-cell scheduling, CoMP introduces a reduction in the backhaul load by requiring only scheduling data to be transferred between coordinated eNBs. Arguably, CoMP is most appealing in the uplink direction since it does not require UE modifications: indeed, users need not be aware that there is any kind of cooperation among receiving eNBs. UEs are merely scheduled for transmission on a set of frequencies that happens to be split among different eNBs, although they still retain standard signaling channels through only one of these eNBs, usually referred to as the serving cell. In this work we focus on uplink CoMP from a system point of view. Specifically, we are interested in comparing through simulation the performance of uplink CoMP in various scenarios with different user participation to CoMP transmissions and CoMP margins. Some works have already investigated uplink CoMP both in simulation and through field trials. Our contribution confirms the findings of previous works as far as the throughput gain for edge users is concerned, but introduces three novel observations that can spur future investigations on CoMP systems, in both downlink and uplink regime, and lead to the design of new resource allocation algorithms: • We look at Heterogeneous scenario where there is no restriction in the type of cells that can be in the CRP set, but simultaneously we introduce clustering option included limited number of Macro and small cells to be acted independently from other clusters in CoMP process. • We introduce a parameter called CoMP Pool Percentage (CPP), which quantifies the fraction of PRBs that are reserved for UEs using a specific eNB as CRP (out of the resources nominally available to that eNB). Our algorithm show that the setting of CPP must be carefully gauged depending on the number of CoMP users and the scenario. • We proposed an innovative dynamic algorithm to make decision of the CPP value in order to improve the gain for CoMP users while considering the whole network gain. Combination of the three above mentioned routine and algorithms, according to simulations, confirms an average gain of at least 20% percent for the CoMP users, (average over various population) locating in cell boarder, while the whole network benefits by average of 5% gain for all the users (see results section). The algorithm also guarantees more gain for more values of CoMP margin. In other words, the more the population of CoMP users locating in cell borders the more would be the achievable gain. Objectives of this PhD thesis are concluded as follows: • Design a Network-level simulator whose features are close to a real LTE network, including advanced capabilities and innovations • Observe the response of the network to parameters changes • Increase the throughput gain (using CoMP vs. non using it) and the quality of service • Design and evaluate the Novel Scheduling Algorithm • Compare the obtained results with real case

Inband Relaying in Long Term Evolution-Advanced Networks

The set of stringent requirements for 4G radio access networks has triggered the embodiment of new small low-power nodes, e.g. relay, Femto and Pico access nodes, as part of the network infrastructure. Various types of relay nodes are currently supported in IEEE 802.16m and 3GPP LTE-Advanced, e.g. inband Layer 2 or Layer 3 nodes and outband nodes, considering different functional capabilities and backhauling characteristics. In general, relay nodes are characterized by compact physical characteristics, low power consumption, a wireless backhaul link to the core network, and relaxed installation guidelines with respect to radiation and planning regulation. In specific, inband relay nodes, the matter of this study, are Layer 3 access nodes with time-multiplexed transmission and reception on their wireless backhaul and access links, which operate on the same frequency band. These characteristics impose serious challenges on one hand, but allow for significant improvements on the other hand. In this context, the deployment flexibility of relay nodes simplifies the network planning procedure and reduces deployment costs. On the other hand, low power transmission and limited antenna capabilities result in small relay cell coverage areas which will lead to load imbalances. Besides, multiplexing backhaul and access communications on different subframes implies the need for suitable two-hop resource allocation and scheduling. Further challenges are attributed to increased interference levels compared to macrocell deployments, as well as the introduction of a new interference type known as relay-to-relay interference resulting from the misalignment of access and backhaul link dedicated subframes at different relay nodes. The research towards this thesis has addressed these challenges within 3GPP LTE-Advanced context. A feasibility study of different relaying modes is provided and the performance of relay deployments is evaluated in different propagation environments. Thereafter, simple network planning techniques are proposed to alleviate the limitations of the inband backhaul link. Further, novel techniques are investigated to address resource allocation and scheduling, load balancing and interference coordination. The performance of proposed techniques along with the energy efficiency of relay nodes is evaluated. Results show in general significant gains and validate relaying as an efficient enhancement technology