Null convention logic circuits for asynchronous computer architecture

For most of its history, computer architecture has been able to benefit from a rapid scaling in semiconductor technology, resulting in continuous improvements to CPU design. During that period, synchronous logic has dominated because of its inherent ease of design and abundant tools. However, with the scaling of semiconductor processes into deep sub-micron and then to nano-scale dimensions, computer architecture is hitting a number of roadblocks such as high power and increased process variability. Asynchronous techniques can potentially offer many advantages compared to conventional synchronous design, including average case vs. worse case performance, robustness in the face of process and operating point variability and the ready availability of high performance, fine grained pipeline architectures. Of the many alternative approaches to asynchronous design, Null Convention Logic (NCL) has the advantage that its quasi delay-insensitive behavior makes it relatively easy to set up complex circuits without the need for exhaustive timing analysis. This thesis examines the characteristics of an NCL based asynchronous RISC-V CPU and analyses the problems with applying NCL to CPU design. While a number of university and industry groups have previously developed small 8-bit microprocessor architectures using NCL techniques, it is still unclear whether these offer any real advantages over conventional synchronous design. A key objective of this work has been to analyse the impact of larger word widths and more complex architectures on NCL CPU implementations. The research commenced by re-evaluating existing techniques for implementing NCL on programmable devices such as FPGAs. The little work that has been undertaken previously on FPGA implementations of asynchronous logic has been inconclusive and seems to indicate that asynchronous systems cannot be easily implemented in these devices. However, most of this work related to an alternative technique called bundled data, which is not well suited to FPGA implementation because of the difficulty in controlling and matching delays in a 'bundle' of signals. On the other hand, this thesis clearly shows that such applications are not only possible with NCL, but there are some distinct advantages in being able to prototype complex asynchronous systems in a field-programmable technology such as the FPGA. A large part of the value of NCL derives from its architectural level behavior, inherent pipelining, and optimization opportunities such as the merging of register and combina- tional logic functions. In this work, a number of NCL multiplier architectures have been analyzed to reveal the performance trade-offs between various non-pipelined, 1D and 2D organizations. Two-dimensional pipelining can easily be applied to regular architectures such as array multipliers in a way that is both high performance and area-efficient. It was found that the performance of 2D pipelining for small networks such as multipliers is around 260% faster than the equivalent non-pipelined design. However, the design uses 265% more transistors so the methodology is mainly of benefit where performance is strongly favored over area. A pipelined 32bit x 32bit signed Baugh-Wooley multiplier with Wallace-Tree Carry Save Adders (CSA), which is representative of a real design used for CPUs and DSPs, was used to further explore this concept as it is faster and has fewer pipeline stages compared to the normal array multiplier using Ripple-Carry adders (RCA). It was found that 1D pipelining with ripple-carry chains is an efficient implementation option but becomes less so for larger multipliers, due to the completion logic for which the delay time depends largely on the number of bits involved in the completion network. The average-case performance of ripple-carry adders was explored using random input vectors and it was observed that it offers little advantage on the smaller multiplier blocks, but this particular timing characteristic of asynchronous design styles be- comes increasingly more important as word size grows. Finally, this research has resulted in the development of the first 32-Bit asynchronous RISC-V CPU core. Called the Redback RISC, the architecture is a structure of pipeline rings composed of computational oscillations linked with flow completeness relationships. It has been written using NELL, a commercial description/synthesis tool that outputs standard Verilog. The Redback has been analysed and compared to two approximately equivalent industry standard 32-Bit synchronous RISC-V cores (PicoRV32 and Rocket) that are already fabricated and used in industry. While the NCL implementation is larger than both commercial cores it has similar performance and lower power compared to the PicoRV32. The implementation results were also compared against an existing NCL design tool flow (UNCLE), which showed how much the results of these implementation strategies differ. The Redback RISC has achieved similar level of throughput and 43% better power and 34% better energy compared to one of the synchronous cores with the same benchmark test and test condition such as input sup- ply voltage. However, it was shown that area is the biggest drawback for NCL CPU design. The core is roughly 2.5× larger than synchronous designs. On the other hand its area is still 2.9× smaller than previous designs using UNCLE tools. The area penalty is largely due to the unavoidable translation into a dual-rail topology when using the standard NCL cell library

NONLINEAR OPERATORS FOR IMAGE PROCESSING: DESIGN, IMPLEMENTATION AND MODELING TECHNIQUES FOR POWER ESTIMATION

1998/1999Negli ultimi anni passati le applicazioni multimediali hanno visto uno sviluppo notevole, trovando applicazione in un gran numero di campi. Applicazioni come video conferenze, diagnostica medica, telefonia mobile e applicazioni militari necessitano il trattamento di una gran mole di dati ad alta velocità. Pertanto, l'elaborazione di immagini e di dati vocali è molto importante ed è stata oggetto di numerosi sforzi, nel tentativo di trovare algoritmi sempre più veloci ed efficaci. Tra gli algoritmi proposti, noi crediamo che gli operatori razionali svolgano un ruolo molto importante, grazie alla loro versatilità ed efficacia nell'elaborazione di dati. Negli ultimi anni sono stati proposti diversi algoritmi, dimostrando che questi operatori possono essere molto vantaggiosi in diverse applicazioni, producendo buoni risultati. Lo scopo di questo lavoro è di realizzare alcuni di questi algoritmi e, quindi, dimostrare che i filtri razionali, in particolare, possono essere realizzati senza ricorrere a sistemi di grandi dimensioni e possono raggiungere frequenze operative molto alte. Una volta che il blocco fondamentale di un sistema basato su operatori razionali sia stato realizzato, esso pu6 essere riusato con successo in molte altre applicazioni. Dal punto di vista del progettista, è importante avere uno schema generale di studio, che lo renda capace di studiare le varie configurazioni del sistema da realizzare e di analizzare i compromessi tra le variabili di progetto. In particolare, per soddisfare l'esigenza di metodi versatili per la stima della potenza, abbiamo sviluppato una tecnica di macro modellizazione che permette al progettista di stimare velocemente ed accuratamente la potenza dissipata da un circuito. La tesi è organizzata come segue: Nel Capitolo 1 alcuni sono presentati alcuni algoritmi studiati per la realizzazione. Ne viene data solo una veloce descrizione, lasciando comunque al lettore interessato dei riferimenti bibliografici. Nel Capitolo 2 vengono discusse le architetture fondamentali usate per la realizzazione. Principalmente sono state usate architetture a pipeline, ma viene data anche una descrizione degli approcci oggigiorno disponibili per l'ottimizzazione delle temporizzazioni. Nel Capitolo 3 sono presentate le realizzazioni di due sistemi studiati per questa tesi. Gli approcci seguiti si basano su ASIC e FPGA. Richiedono tecniche e soluzioni diverse per il progetto del sistema, per cui é interessante vedere cosa pu6 essere fatto nei due casi. Infine, nel Capitolo 4, descriviamo la nostra tecnica di macro modellizazione per la stima di potenza, dando una breve visione delle tecniche finora proposte e facendo vedere quali sono i vantaggi che il nostro metodo comporta per il progetto.In the past few years, multimedia application have been growing very fast, being applied to a large variety of fields. Applications like video conference, medical diagnostic, mobile phones, military applications require to handle large amount of data at high rate. Images as well as voice data processing are therefore very important and they have been subjected to a lot of efforts in order to find always faster and effective algorithms. Among image processing algorithms, we believe that rational operators assume an important role, due to their versatility and effectiveness in data processing. In the last years, several algorithms have been proposed, demonstrating that these operators can be very suitable in different applications with very good results. The aim of this work is to implement some of these algorithm and, therefore, demonstrate that rational filters, in particular, can be implemented without requiring large sized systems and they can operate at very high frequencies. Once the basic building block of a rational based system has been implemented, it can be successfully reused in many other applications. From the designer point of view, it is important to have a general framework, which makes it able to study various configurations of the system to be implemented and analyse the trade-off among the design variables. In particular, to meet the need far versatile tools far power estimation, we developed a new macro modelling technique, which allows the designer to estimate the power dissipated by a circuit quickly and accurately. The thesis is organized as follows: In chapter 1 we present some of the algorithms which have been studied for implementation. Only a brief overview is given, leaving to the interested reader some references in literature. In chapter 2 we discuss the basic architectures used for the implementations. Pipelined structures have been mainly used for this thesis, but an overview of the nowaday available approaches for timing optimization is presented. In chapter 3 we present two of the implementation designed for this thesis. The approaches followed are ASIC driven and FPGA drive. They require different techniques and different solution for the design of the system, therefore it is interesting to see what can be done in both the cases. Finally, in chapter 4, we describe our macro modelling techniques for power estimation, giving a brief overview of the up to now proposed techniques and showing the advantages our method brings to the design.XII Ciclo1969Versione digitalizzata della tesi di dottorato cartacea

Solutions and application areas of flip-flop metastability

PhD ThesisThe state space of every continuous multi-stable system is bound to contain one or more metastable regions where the net attraction to the stable states can be infinitely-small. Flip-flops are among these systems and can take an unbounded amount of time to decide which logic state to settle to once they become metastable. This problematic behavior is often prevented by placing the setup and hold time conditions on the flip-flop’s input. However, in applications such as clock domain crossing where these constraints cannot be placed flip-flops can become metastable and induce catastrophic failures. These events are fundamentally impossible to prevent but their probability can be significantly reduced by employing synchronizer circuits. The latter grant flip-flops longer decision time at the expense of introducing latency in processing the synchronized input. This thesis presents a collection of research work involving the phenomenon of flip-flop metastability in digital systems. The main contributions include three novel solutions for the problem of synchronization. Two of these solutions are speculative methods that rely on duplicate state machines to pre-compute data-dependent states ahead of the completion of synchronization. Speculation is a core theme of this thesis and is investigated in terms of its functional correctness, cost efficacy and fitness for being automated by electronic design automation tools. It is shown that speculation can outperform conventional synchronization solutions in practical terms and is a viable option for future technologies. The third solution attempts to address the problem of synchronization in the more-specific context of variable supply voltages. Finally, the thesis also identifies a novel application of metastability as a means of quantifying intra-chip physical parameters. A digital sensor is proposed based on the sensitivity of metastable flip-flops to changes in their environmental parameters and is shown to have better precision while being more compact than conventional digital sensors

Digital Implementation of Bio-Inspired Spiking Neuronal Networks

Spiking Neural Network as the third generation of artificial neural networks offers a promising solution for future computing, prosthesis, robotic and image processing applications. This thesis introduces digital designs and implementations of building blocks of a Spiking Neural Networks (SNNs) including neurons, learning rule, and small networks of neurons in the form of a Central Pattern Generator (CPG) which can be used as a module in control part of a bio-inspired robot. The circuits have been developed using Verilog Hardware Description Language (VHDL) and simulated through Modelsim and compiled and synthesised by Altera Qurtus Prime software for FPGA devices. Astrocyte as one of the brain cells controls synaptic activity between neurons by providing feedback to neurons. A novel digital hardware is proposed for neuron-synapseastrocyte network based on the biological Adaptive Exponential (AdEx) neuron and Postnov astrocyte cell model. The network can be used for implementation of large scale spiking neural networks. Synthesis of the designed circuits shows that the designed astrocyte circuit is able to imitate its biological model and regulate the synapse transmission, successfully. In addition, synthesis results confirms that the proposed design uses less than 1% of available resources of a VIRTEX II FPGA which saves up to 4.4% of FPGA resources in comparison to other designs. Learning rule is an essential part of every neural network including SNN. In an SNN, a special type of learning called Spike Timing Dependent Plasticity (STDP) is used to modify the connection strength between the spiking neurons. A pair-based STDP (PSTDP) works on pairs of spikes while a Triplet-based STDP (TSTDP) works on triplets of spikes to modify the synaptic weights. A low cost, accurate, and configurable digital architectures are proposed for PSTDP and TSTDP learning models. The proposed circuits have been compared with the state of the art methods like Lookup Table (LUT), and Piecewise Linear approximation (PWL). The circuits can be employed in a large-scale SNN implementation due to their compactness and configurability. Most of the neuron models represented in the literature are introduced to model the behavior of a single neuron. Since there is a large number of neurons in the brain, a population-based model can be helpful in better understanding of the brain functionality, implementing cognitive tasks and studying the brain diseases. Gaussian Wilson-Cowan model as one of the population-based models represents neuronal activity in the neocortex region of the brain. A digital model is proposed for the GaussianWilson-Cowan and examined in terms of dynamical and timing behavior. The evaluation indicates that the proposed model is able to generate the dynamical behavior as the original model is capable of. Digital architectures are implemented on an Altera FPGA board. Experimental results show that the proposed circuits take maximum 2% of the resources of a Stratix Altera board. In addition, static timing analysis indicates that the circuits can work in a maximum frequency of 244 MHz

Efficient FPGA implementation and power modelling of image and signal processing IP cores

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage and signal processing application areas such as consumer electronics, instrumentation, medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area. A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed

Comparison of different design alternatives for hardware-in-the-loop of power converters

This paper aims to compare different design alternatives of hardware-in-the-loop (HIL) for emulating power converters in Field Programmable Gate Arrays (FPGAs). It proposes various numerical formats (fixed and floating-point) and different approaches (pure VHSIC Hardware Description Language (VHDL), Intellectual Properties (IPs), automated MATLAB HDL code, and High-Level Synthesis (HLS)) to design power converters. Although the proposed models are simple power electronics HIL systems, the idea can be extended to any HIL system. This study compares the design effort of different coding methods and numerical formats considering possible synthesis tools (Precision and Vivado), and it comprises an analytical discussion in terms of area and speed. The different models are synthesized as ad-hoc modules in general-purpose FPGAs, but also using the NI myRIO device as an example of a commercial tool capable of implementing HIL models. The comparison confirms that the optimum design alternative must be chosen based on the application (complexity, frequency, etc.) and designers’ constraints, such as available area, coding expertise, and design effor

Memory hierarchy and data communication in heterogeneous reconfigurable SoCs

The miniaturization race in the hardware industry aiming at continuous increasing of transistor density on a die does not bring respective application performance improvements any more. One of the most promising alternatives is to exploit a heterogeneous nature of common applications in hardware. Supported by reconfigurable computation, which has already proved its efficiency in accelerating data intensive applications, this concept promises a breakthrough in contemporary technology development. Memory organization in such heterogeneous reconfigurable architectures becomes very critical. Two primary aspects introduce a sophisticated trade-off. On the one hand, a memory subsystem should provide well organized distributed data structure and guarantee the required data bandwidth. On the other hand, it should hide the heterogeneous hardware structure from the end-user, in order to support feasible high-level programmability of the system. This thesis work explores the heterogeneous reconfigurable hardware architectures and presents possible solutions to cope the problem of memory organization and data structure. By the example of the MORPHEUS heterogeneous platform, the discussion follows the complete design cycle, starting from decision making and justification, until hardware realization. Particular emphasis is made on the methods to support high system performance, meet application requirements, and provide a user-friendly programmer interface. As a result, the research introduces a complete heterogeneous platform enhanced with a hierarchical memory organization, which copes with its task by means of separating computation from communication, providing reconfigurable engines with computation and configuration data, and unification of heterogeneous computational devices using local storage buffers. It is distinguished from the related solutions by distributed data-flow organization, specifically engineered mechanisms to operate with data on local domains, particular communication infrastructure based on Network-on-Chip, and thorough methods to prevent computation and communication stalls. In addition, a novel advanced technique to accelerate memory access was developed and implemented

The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2