1,783 research outputs found
Behavioral modeling of power line communication channels for automotive applications
The black-box modeling of a power line communication channel in a car is addressed in this paper. The proposed behavioral approach is based on the so-called multipath model representation, that describes the transmission of a signal on a possibly complex power network by means of a finite number of delayed echoes. Model parameters are estimated from the frequency-domain response of the channel via a well-defined modeling procedure. A first assessment on the inclusion in the model equation of the variability of the response of the channel is carried out. The effectiveness of the approach has been demonstrated on a set of real measurements carried out on a commercial automobil
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Performance Analysis and Enhancement of Multiband OFDM for UWB Communications
In this paper, we analyze the frequency-hopping orthogonal frequency-division
multiplexing (OFDM) system known as Multiband OFDM for high-rate wireless
personal area networks (WPANs) based on ultra-wideband (UWB) transmission.
Besides considering the standard, we also propose and study system performance
enhancements through the application of Turbo and Repeat-Accumulate (RA) codes,
as well as OFDM bit-loading. Our methodology consists of (a) a study of the
channel model developed under IEEE 802.15 for UWB from a frequency-domain
perspective suited for OFDM transmission, (b) development and quantification of
appropriate information-theoretic performance measures, (c) comparison of these
measures with simulation results for the Multiband OFDM standard proposal as
well as our proposed extensions, and (d) the consideration of the influence of
practical, imperfect channel estimation on the performance. We find that the
current Multiband OFDM standard sufficiently exploits the frequency selectivity
of the UWB channel, and that the system performs in the vicinity of the channel
cutoff rate. Turbo codes and a reduced-complexity clustered bit-loading
algorithm improve the system power efficiency by over 6 dB at a data rate of
480 Mbps.Comment: 32 pages, 10 figures, 1 table. Submitted to the IEEE Transactions on
Wireless Communications (Sep. 28, 2005). Minor revisions based on reviewers'
comments (June 23, 2006
Raking the Cocktail Party
We present the concept of an acoustic rake receiver---a microphone beamformer
that uses echoes to improve the noise and interference suppression. The rake
idea is well-known in wireless communications; it involves constructively
combining different multipath components that arrive at the receiver antennas.
Unlike spread-spectrum signals used in wireless communications, speech signals
are not orthogonal to their shifts. Therefore, we focus on the spatial
structure, rather than temporal. Instead of explicitly estimating the channel,
we create correspondences between early echoes in time and image sources in
space. These multiple sources of the desired and the interfering signal offer
additional spatial diversity that we can exploit in the beamformer design.
We present several "intuitive" and optimal formulations of acoustic rake
receivers, and show theoretically and numerically that the rake formulation of
the maximum signal-to-interference-and-noise beamformer offers significant
performance boosts in terms of noise and interference suppression. Beyond
signal-to-noise ratio, we observe gains in terms of the \emph{perceptual
evaluation of speech quality} (PESQ) metric for the speech quality. We
accompany the paper by the complete simulation and processing chain written in
Python. The code and the sound samples are available online at
\url{http://lcav.github.io/AcousticRakeReceiver/}.Comment: 12 pages, 11 figures, Accepted for publication in IEEE Journal on
Selected Topics in Signal Processing (Special Issue on Spatial Audio
Characterization of causes of signal phase and frequency instability Final report
Characteristic instabilities in phase and frequency errors of reference oscillator
Location-free Spectrum Cartography
Spectrum cartography constructs maps of metrics such as channel gain or
received signal power across a geographic area of interest using spatially
distributed sensor measurements. Applications of these maps include network
planning, interference coordination, power control, localization, and cognitive
radios to name a few. Since existing spectrum cartography techniques require
accurate estimates of the sensor locations, their performance is drastically
impaired by multipath affecting the positioning pilot signals, as occurs in
indoor or dense urban scenarios. To overcome such a limitation, this paper
introduces a novel paradigm for spectrum cartography, where estimation of
spectral maps relies on features of these positioning signals rather than on
location estimates. Specific learning algorithms are built upon this approach
and offer a markedly improved estimation performance than existing approaches
relying on localization, as demonstrated by simulation studies in indoor
scenarios.Comment: 14 pages, 12 figures, 1 table. Submitted to IEEE Transactions on
Signal Processin
Bit error performance of diffuse indoor optical wireless channel pulse position modulation system employing artificial neural networks for channel equalisation
The bit-error rate (BER) performance of a pulse position modulation (PPM) scheme for non-line-of-sight indoor optical links employing channel equalisation based on the artificial neural network (ANN) is reported. Channel equalisation is achieved by training a multilayer perceptrons ANN. A comparative study of the unequalised `soft' decision decoding and the `hard' decision decoding along with the neural equalised `soft' decision decoding is presented for different bit resolutions for optical channels with different delay spread. We show that the unequalised `hard' decision decoding performs the worst for all values of normalised delayed spread, becoming impractical beyond a normalised delayed spread of 0.6. However, `soft' decision decoding with/without equalisation displays relatively improved performance for all values of the delay spread. The study shows that for a highly diffuse channel, the signal-to-noise ratio requirement to achieve a BER of 10−5 for the ANN-based equaliser is ~10 dB lower compared with the unequalised `soft' decoding for 16-PPM at a data rate of 155 Mbps. Our results indicate that for all range of delay spread, neural network equalisation is an effective tool of mitigating the inter-symbol interference
Experimental Investigation Of Ultrawideband Wireless Systems: Waveform Generation, Propagation Estimation, And Dispersion Compensation
Ultrawideband (UWB) is an emerging technology for the future high-speed wireless communication systems. Although this technology offers several unique advantages like robustness to fading, large channel capacity and strong anti-jamming ability, there are a number of practical challenges which are topics of current research. One key challenge is the increased multipath dispersion which results because of the fine temporal resolution. The received response consists of different components, which have certain delays and attenuations due to the paths they took in their propagation from the transmitter to the receiver. Although such challenges have been investigated to some extent, they have not been fully explored in connection with sophisticated transmit beamforming techniques in realistic multipath environments.
The work presented here spans three main aspects of UWB systems including waveform generation, propagation estimation, and dispersion compensation. We assess the accuracy of the measured impulse responses extracted from the spread spectrum channel sounding over a frequency band spanning 2-12 GHz. Based on the measured responses, different transmit beamforming techniques are investigated to achieve high-speed data transmission in rich multipath channels. We extend our work to multiple antenna systems and implement the first experimental test-bed to investigate practical challenges such as imperfect channel estimation or coherency between the multiple transmitters over the full UWB band. Finally, we introduce a new microwave photonic arbitrary waveform generation technique to demonstrate the first optical-wireless transmitter system for both characterizing channel dispersion and generating predistorted waveforms to achieve spatio-temporal focusing through the multipath channels
- …