Pavement Markings and Safety

Previous research on pavement markings from a safety perspective tackled various issues such as pavement marking retroreflectivity variability, relationship between pavement marking retroreflectivity and driver visibility, or pavement marking improvements and safety. A recent research interest in this area has been to find a correlation between retroreflectivity and crashes, but a significant statistical relationship has not yet been found. This study investigates such a possible statistical relationship by analyzing five years of pavement marking retroreflectivity data collected by the Iowa Department of Transportation (DOT) on all state primary roads and corresponding crash and traffic data. This study developed a spatial-temporal database using measured retroreflectivity data to account for the deterioration of pavement markings over time along with statewide crash data to attempt to quantify a relationship between crash occurrence probability and pavement marking retroreflectivity. First, logistic regression analyses were done for the whole data set to find a statistical relationship between crash occurrence probability and identified variables, which are road type, line type, retroreflectivity, and traffic (vehicle miles traveled). The analysis looked into subsets of the data set such as road type, retroreflectivity measurement source, high crash routes, retroreflectivity range, and line types. Retroreflectivity was found to have a significant effect in crash occurrence probability for four data subsets—interstate, white edge line, yellow edge line, and yellow center line data. For white edge line and yellow center line data, crash occurrence probability was found to increase by decreasing values of retroreflectivity

Panorama-Based Multilane Recognition for Advanced Navigation Map Generation

Precise navigation map is crucial in many fields. This paper proposes a panorama based method to detect and recognize lane markings and traffic signs on the road surface. Firstly, to deal with the limited field of view and the occlusion problem, this paper designs a vision-based sensing system which consists of a surround view system and a panoramic system. Secondly, in order to detect and identify traffic signs on the road surface, sliding window based detection method is proposed. Template matching method and SVM (Support Vector Machine) are used to recognize the traffic signs. Thirdly, to avoid the occlusion problem, this paper utilities vision based ego-motion estimation to detect and remove other vehicles. As surround view images contain less dynamic information and gray scales, improved ICP (Iterative Closest Point) algorithm is introduced to ensure that the ego-motion parameters are consequently obtained. For panoramic images, optical flow algorithm is used. The results from the surround view system help to filter the optical flow and optimize the ego-motion parameters; other vehicles are detected by the optical flow feature. Experimental results show that it can handle different kinds of lane markings and traffic signs well

Modeling present and future freeway management strategies : variable speed limits, lane-changing and platooning of connected autonomous vehicles

Premi Extraordinari de Doctorat, promoció 2018-2019. Àmbit d’Enginyeria Civil i AmbientalFreeway traffic management is necessary to improve capacity and reduce congestion, especially in metropolitan freeways where the rush period lasts several hours per day. Traffic congestion implies delays and an increase in air pollutant emissions, both with harmful effects to society. Active management strategies imply regulating traffic demand and improving freeway capacity. While both aspects are necessary, the present thesis only addresses the supply side. Part of the research in traffic flow theory is grounded on empirical data. Today, in order to extend our knowledge on traffic dynamics, detailed and high-quality data is needed. To that end, the thesis presents a pioneering data collection campaign, which was developed in a freeway accessing Barcelona. In a Variable Speed Limits (VSL) environment, different speed limits where posted, in order to observe their real and detailed effects on traffic. All the installed surveillance instruments were set to capture data in the highest possible level of detail, including video recordings, from where to count lane-changing maneuvers. With this objective, a semi-automatic method to reliably count lane changes form video recordings was developed and is presented in the thesis. Data analysis proved that the speed limit fulfillment was only relevant in sections with enforcement devices. In these sections, it is confirmed that, the lower the speed limit, the higher the occupancy to achieve a given flow. In contrast, the usually assumed mainline metering effect of low speed limits was not relevant. This might be different in case of stretch enforcement. These findings mean that, on the one hand, VSL strategies aiming to restrict the mainline flow on a freeway by using low speed limits will need to be applied carefully, avoiding conditions as the ones presented here. On the other hand, VSL strategies trying to get the most from the increased vehicle storage capacity of freeways under low speed limits might be rather promising. Results also show that low speed limits increase the speed differences across lanes for moderate demands. This, in turn, also increases the lane changing rates. In contrast, lower speed limits widen the range of flows under uniform lane flow distributions, so that, even for moderate to low demands, the under-utilization of any lane can be avoided. Further analysis of lane-changing activity allowed unveiling that high lane-changing rates prevent achieving the highest flows. This inverse relationship is modeled in the thesis using a stochastic model based on Bayesian inference. This model could be used as a control tool, in order to determine which level of lane-changing activity can be allowed to achieve a desired capacity with some level of reliability. Previous results identify drivers' fulfillment of traffic regulations as a weak point in order to maximize the benefits of current management strategies, like VSL or lane-changing control. This is likely to change in the near future with the irruption of Autonomous Vehicles (AV) in freeways. V2X communications will allow directly actuating on individual vehicles with high accuracy. This will open the door to new management strategies based on simultaneous communication to groups of AVs and extremely short reaction times, like platooning, which stands out as a strategy with a huge potential to improve freeway traffic. Strings of AVs traveling at extremely short gaps (i.e. platoons) allow achieving higher capacities and lower energy consumption rates. In this context, the thesis presents a parsimonious macroscopic model for AVs platooning in mixed traffic (i.e. platoons of AVs travelling together with human driven vehicles). The model allows determining the average platoon length and reproducing the overall traffic dynamics leading to higher capacities. Results prove that with a 50% penetration rate of AVs in the lane, capacity could reach 3400 veh/h/lane under a cooperative platooning strategy.Per tal de millorar la capacitat i reduir la congestió a les autopistes cal gestionar el trànsit de manera activa. Les estratègies de gestió activa del trànsit són d’especial importància en autopistes metropolitanes. La congestió provoca retards i un increment del consum de combustible que va lligat a unes majors emissions de gasos contaminants, tots amb efectes perniciosos per la societat. La gestió activa del transit requereix regular la demanda i millorar la capacitat de la via. Encara que tots dos aspectes son necessaris, la present tesis només analitza la gestió de l’oferta. Part de la recerca en l’anàlisi i la teoria del trànsit es basa en dades empíriques. Per satisfer el requeriment de dades detallades i d’alta qualitat, aquesta tesis presenta una campanya pionera de recol·lecció de dades. Les dades es van recollir a l’autopista B-23 d’accés a Barcelona. Tots els instruments de mesura es van configurar per tal de registrar les dades amb el major nivell de detall possible, incloent les càmeres de videovigilància, d’on es varen extreure els comptatges de canvi de carril. Amb aquest objectiu, es va desenvolupar una metodologia semiautomàtica per comptar canvis de carril a partir de gravacions de trànsit, que es presenta en el cos de la tesi. L’anàlisi de les dades obtingudes ha demostrat que el compliment dels límits de velocitat només resulta rellevant en aquelles seccions que compten amb un radar. És en aquestes seccions on s’ha confirmat que com menor és el límit de velocitat, major es l’ocupació per a un flux donat. Per contra, la hipòtesi habitual de que uns límits de velocitat baixos produeixen una restricció del flux no es va observar de forma rellevant. Aquest comportament podria esser diferent en el cas d’implantar un radar de tram. Els resultats obtinguts també mostren com les diferències de velocitats entre carrils s’incrementen per a límits de velocitat baixos i en condicions de demanda moderada. Això, alhora, incrementa el nombre de canvis de carril. Per contra, els límits de velocitat baixos contribueixen a una distribució de flux més uniforme entre carrils, de forma que es pot evitar la infrautilització de carrils. L’anàlisi més detallat de l’activitat de canvi de carril demostra que una taxa elevada de canvis de carril impedeix assolir fluxos grans de circulació. En la tesi, aquesta relació inversa entre la taxa de canvis de carril i el flux màxim de trànsit a l’autopista s’ha modelat de forma estocàstica utilitzant un model basat en la inferència Bayesiana. Aquest model es pot utilitzar com una eina de control, per tal de determinar quina taxa de canvi de carril es pot permetre si es vol assolir una capacitat determinada amb una determinada probabilitat de compliment. En vista dels resultats previs, la falta de compliment de les normes de trànsit per part dels conductors s’identifica com un punt dèbil a l’hora de maximitzar els beneficis de les actuals estratègies de gestió del transit. Això probablement canviarà en el futur pròxim amb la irrupció dels Vehicles Autònoms (VA) a les autopistes. Els sistemes de comunicació V2X permetran actuar individualment sobre cada vehicle amb una gran precisió. Això obrirà la porta a noves estratègies de gestió, basades en la comunicació simultània entre diferents grups de VA i en temps de reacció extremadament curts, com per exemple és el “platooning”, que destaca pel seu gran potencial per millorar el trànsit en autopista. Els “platons” son cadenes de VA viatjant amb uns espaiaments extremadament curts que permeten assolir capacitats mes elevades i un menor consum energètic. En aquest context, la tesi presenta un model macroscòpic parsimoniós per a “platons” de VA en condicions de transit mixt, és a dir, compartint la infraestructura amb vehicles tradicionals. El model permet determinar la longitud mitjana del “platons” i reproduir el trànsit global dinàmiques que condueixen a majors capacitats. Els resultats demostren que amb un 50% la velocitat de penetració dels AV al carril, la capacitat podria arribar als 3.400 vehicles / h / carril sota una estratègia cooperativa de “platooning”Award-winningPostprint (published version

Modeling present and future freeway management strategies : variable speed limits, lane-changing and platooning of connected autonomous vehicles

Freeway traffic management is necessary to improve capacity and reduce congestion, especially in metropolitan freeways where the rush period lasts several hours per day. Traffic congestion implies delays and an increase in air pollutant emissions, both with harmful effects to society. Active management strategies imply regulating traffic demand and improving freeway capacity. While both aspects are necessary, the present thesis only addresses the supply side. Part of the research in traffic flow theory is grounded on empirical data. Today, in order to extend our knowledge on traffic dynamics, detailed and high-quality data is needed. To that end, the thesis presents a pioneering data collection campaign, which was developed in a freeway accessing Barcelona. In a Variable Speed Limits (VSL) environment, different speed limits where posted, in order to observe their real and detailed effects on traffic. All the installed surveillance instruments were set to capture data in the highest possible level of detail, including video recordings, from where to count lane-changing maneuvers. With this objective, a semi-automatic method to reliably count lane changes form video recordings was developed and is presented in the thesis. Data analysis proved that the speed limit fulfillment was only relevant in sections with enforcement devices. In these sections, it is confirmed that, the lower the speed limit, the higher the occupancy to achieve a given flow. In contrast, the usually assumed mainline metering effect of low speed limits was not relevant. This might be different in case of stretch enforcement. These findings mean that, on the one hand, VSL strategies aiming to restrict the mainline flow on a freeway by using low speed limits will need to be applied carefully, avoiding conditions as the ones presented here. On the other hand, VSL strategies trying to get the most from the increased vehicle storage capacity of freeways under low speed limits might be rather promising. Results also show that low speed limits increase the speed differences across lanes for moderate demands. This, in turn, also increases the lane changing rates. In contrast, lower speed limits widen the range of flows under uniform lane flow distributions, so that, even for moderate to low demands, the under-utilization of any lane can be avoided. Further analysis of lane-changing activity allowed unveiling that high lane-changing rates prevent achieving the highest flows. This inverse relationship is modeled in the thesis using a stochastic model based on Bayesian inference. This model could be used as a control tool, in order to determine which level of lane-changing activity can be allowed to achieve a desired capacity with some level of reliability. Previous results identify drivers' fulfillment of traffic regulations as a weak point in order to maximize the benefits of current management strategies, like VSL or lane-changing control. This is likely to change in the near future with the irruption of Autonomous Vehicles (AV) in freeways. V2X communications will allow directly actuating on individual vehicles with high accuracy. This will open the door to new management strategies based on simultaneous communication to groups of AVs and extremely short reaction times, like platooning, which stands out as a strategy with a huge potential to improve freeway traffic. Strings of AVs traveling at extremely short gaps (i.e. platoons) allow achieving higher capacities and lower energy consumption rates. In this context, the thesis presents a parsimonious macroscopic model for AVs platooning in mixed traffic (i.e. platoons of AVs travelling together with human driven vehicles). The model allows determining the average platoon length and reproducing the overall traffic dynamics leading to higher capacities. Results prove that with a 50% penetration rate of AVs in the lane, capacity could reach 3400 veh/h/lane under a cooperative platooning strategy.Per tal de millorar la capacitat i reduir la congestió a les autopistes cal gestionar el trànsit de manera activa. Les estratègies de gestió activa del trànsit són d’especial importància en autopistes metropolitanes. La congestió provoca retards i un increment del consum de combustible que va lligat a unes majors emissions de gasos contaminants, tots amb efectes perniciosos per la societat. La gestió activa del transit requereix regular la demanda i millorar la capacitat de la via. Encara que tots dos aspectes son necessaris, la present tesis només analitza la gestió de l’oferta. Part de la recerca en l’anàlisi i la teoria del trànsit es basa en dades empíriques. Per satisfer el requeriment de dades detallades i d’alta qualitat, aquesta tesis presenta una campanya pionera de recol·lecció de dades. Les dades es van recollir a l’autopista B-23 d’accés a Barcelona. Tots els instruments de mesura es van configurar per tal de registrar les dades amb el major nivell de detall possible, incloent les càmeres de videovigilància, d’on es varen extreure els comptatges de canvi de carril. Amb aquest objectiu, es va desenvolupar una metodologia semiautomàtica per comptar canvis de carril a partir de gravacions de trànsit, que es presenta en el cos de la tesi. L’anàlisi de les dades obtingudes ha demostrat que el compliment dels límits de velocitat només resulta rellevant en aquelles seccions que compten amb un radar. És en aquestes seccions on s’ha confirmat que com menor és el límit de velocitat, major es l’ocupació per a un flux donat. Per contra, la hipòtesi habitual de que uns límits de velocitat baixos produeixen una restricció del flux no es va observar de forma rellevant. Aquest comportament podria esser diferent en el cas d’implantar un radar de tram. Els resultats obtinguts també mostren com les diferències de velocitats entre carrils s’incrementen per a límits de velocitat baixos i en condicions de demanda moderada. Això, alhora, incrementa el nombre de canvis de carril. Per contra, els límits de velocitat baixos contribueixen a una distribució de flux més uniforme entre carrils, de forma que es pot evitar la infrautilització de carrils. L’anàlisi més detallat de l’activitat de canvi de carril demostra que una taxa elevada de canvis de carril impedeix assolir fluxos grans de circulació. En la tesi, aquesta relació inversa entre la taxa de canvis de carril i el flux màxim de trànsit a l’autopista s’ha modelat de forma estocàstica utilitzant un model basat en la inferència Bayesiana. Aquest model es pot utilitzar com una eina de control, per tal de determinar quina taxa de canvi de carril es pot permetre si es vol assolir una capacitat determinada amb una determinada probabilitat de compliment. En vista dels resultats previs, la falta de compliment de les normes de trànsit per part dels conductors s’identifica com un punt dèbil a l’hora de maximitzar els beneficis de les actuals estratègies de gestió del transit. Això probablement canviarà en el futur pròxim amb la irrupció dels Vehicles Autònoms (VA) a les autopistes. Els sistemes de comunicació V2X permetran actuar individualment sobre cada vehicle amb una gran precisió. Això obrirà la porta a noves estratègies de gestió, basades en la comunicació simultània entre diferents grups de VA i en temps de reacció extremadament curts, com per exemple és el “platooning”, que destaca pel seu gran potencial per millorar el trànsit en autopista. Els “platons” son cadenes de VA viatjant amb uns espaiaments extremadament curts que permeten assolir capacitats mes elevades i un menor consum energètic. En aquest context, la tesi presenta un model macroscòpic parsimoniós per a “platons” de VA en condicions de transit mixt, és a dir, compartint la infraestructura amb vehicles tradicionals. El model permet determinar la longitud mitjana del “platons” i reproduir el trànsit global dinàmiques que condueixen a majors capacitats. Els resultats demostren que amb un 50% la velocitat de penetració dels AV al carril, la capacitat podria arribar als 3.400 vehicles / h / carril sota una estratègia cooperativa de “platooning

A Rule Based Control Algorithm for on-Ramp Merge With Connected and Automated Vehicles

One of the designs for future highways with the flow of Connected Automated Vehicles (CAVs) cars will be a dedicated lane for the CAVs to form platoons and travel with higher speeds and lower headways. The connectivity will enable the formation of platoons of CAVs traveling beside non-platoon lanes. The advent of connectivity between vehicles and the infrastructure will enable advanced control strategies ̶ improving the performance of the traffic ̶ to be incorporated in the traffic system. The merge area in a multilane highway with CAVs is one of the sections which can be enhanced by the operation of a control system. In this research, a model is developed for investigating the effects of a Rule Based control strategy yielding a more efficient and systematic method for the vehicles joining the highway mainlines comprised of platoon and non-platoon lanes. The actions tested for assisting the merge process included deceleration in the mainlines and lane change to join a platoon in the platoon lane. The model directs every CAV entering a multi-lane highway from an on-ramp, to the rightmost lane of the highway based on the appropriate action which is selected according to the traffic demand conditions and location of the on-ramp vehicle. To account for car following behavior, the vehicles in the platoon lanes are assumed to have a simplified CACC (cooperative adaptive cruise control) and those in the non-platoon lanes the IDM+ car-following model. The IDM+ car following model is modified with additional controls to incorporate the current technologies of Advanced Driver Assistant Systems (ADAS). The results of this study showed that the proposed car following model can increase the throughput of the non-platoon lane from approximately 2000 vehicle per hour (vph) to 3400 vph while the platoon lanes each had an average throughput of 3500 vph. The merge model enabled higher merging throughput for the merge area compared to current day conditions and displayed the potential for improved traffic performance in a connected environment comprised of platoon and non-platoon lanes. The results of this research will help in the design and development of advanced systems for controlling on-ramp merge sections in the future with CAVs

IEEE Access Special Section Editorial: Big Data Technology and Applications in Intelligent Transportation

During the last few years, information technology and transportation industries, along with automotive manufacturers and academia, are focusing on leveraging intelligent transportation systems (ITS) to improve services related to driver experience, connected cars, Internet data plans for vehicles, traffic infrastructure, urban transportation systems, traffic collaborative management, road traffic accidents analysis, road traffic flow prediction, public transportation service plan, personal travel route plans, and the development of an effective ecosystem for vehicles, drivers, traffic controllers, city planners, and transportation applications. Moreover, the emerging technologies of the Internet of Things (IoT) and cloud computing have provided unprecedented opportunities for the development and realization of innovative intelligent transportation systems where sensors and mobile devices can gather information and cloud computing, allowing knowledge discovery, information sharing, and supported decision making. However, the development of such data-driven ITS requires the integration, processing, and analysis of plentiful information obtained from millions of vehicles, traffic infrastructures, smartphones, and other collaborative systems like weather stations and road safety and early warning systems. The huge amount of data generated by ITS devices is only of value if utilized in data analytics for decision-making such as accident prevention and detection, controlling road risks, reducing traffic carbon emissions, and other applications which bring big data analytics into the picture

Identification of safety effects of infrastructure related measures, Deliverable 5.2 of the H2020 project SafetyCube

Identification of safety effects of infrastructure related measures, Deliverable 5.2 of the H2020 project SafetyCub

Deep Learning in Lane Marking Detection: A Survey

Lane marking detection is a fundamental but crucial step in intelligent driving systems. It can not only provide relevant road condition information to prevent lane departure but also assist vehicle positioning and forehead car detection. However, lane marking detection faces many challenges, including extreme lighting, missing lane markings, and obstacle obstructions. Recently, deep learning-based algorithms draw much attention in intelligent driving society because of their excellent performance. In this paper, we review deep learning methods for lane marking detection, focusing on their network structures and optimization objectives, the two key determinants of their success. Besides, we summarize existing lane-related datasets, evaluation criteria, and common data processing techniques. We also compare the detection performance and running time of various methods, and conclude with some current challenges and future trends for deep learning-based lane marking detection algorithm