2,984 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
RFID Localisation For Internet Of Things Smart Homes: A Survey
The Internet of Things (IoT) enables numerous business opportunities in
fields as diverse as e-health, smart cities, smart homes, among many others.
The IoT incorporates multiple long-range, short-range, and personal area
wireless networks and technologies into the designs of IoT applications.
Localisation in indoor positioning systems plays an important role in the IoT.
Location Based IoT applications range from tracking objects and people in
real-time, assets management, agriculture, assisted monitoring technologies for
healthcare, and smart homes, to name a few. Radio Frequency based systems for
indoor positioning such as Radio Frequency Identification (RFID) is a key
enabler technology for the IoT due to its costeffective, high readability
rates, automatic identification and, importantly, its energy efficiency
characteristic. This paper reviews the state-of-the-art RFID technologies in
IoT Smart Homes applications. It presents several comparable studies of RFID
based projects in smart homes and discusses the applications, techniques,
algorithms, and challenges of adopting RFID technologies in IoT smart home
systems.Comment: 18 pages, 2 figures, 3 table
A New Reduction Scheme for Gaussian Sum Filters
In many signal processing applications it is required to estimate the
unobservable state of a dynamic system from its noisy measurements. For linear
dynamic systems with Gaussian Mixture (GM) noise distributions, Gaussian Sum
Filters (GSF) provide the MMSE state estimate by tracking the GM posterior.
However, since the number of the clusters of the GM posterior grows
exponentially over time, suitable reduction schemes need to be used to maintain
the size of the bank in GSF. In this work we propose a low computational
complexity reduction scheme which uses an initial state estimation to find the
active noise clusters and removes all the others. Since the performance of our
proposed method relies on the accuracy of the initial state estimation, we also
propose five methods for finding this estimation. We provide simulation results
showing that with suitable choice of the initial state estimation (based on the
shape of the noise models), our proposed reduction scheme provides better state
estimations both in terms of accuracy and precision when compared with other
reduction methods
Map-Aware Models for Indoor Wireless Localization Systems: An Experimental Study
The accuracy of indoor wireless localization systems can be substantially
enhanced by map-awareness, i.e., by the knowledge of the map of the environment
in which localization signals are acquired. In fact, this knowledge can be
exploited to cancel out, at least to some extent, the signal degradation due to
propagation through physical obstructions, i.e., to the so called
non-line-of-sight bias. This result can be achieved by developing novel
localization techniques that rely on proper map-aware statistical modelling of
the measurements they process. In this manuscript a unified statistical model
for the measurements acquired in map-aware localization systems based on
time-of-arrival and received signal strength techniques is developed and its
experimental validation is illustrated. Finally, the accuracy of the proposed
map-aware model is assessed and compared with that offered by its map-unaware
counterparts. Our numerical results show that, when the quality of acquired
measurements is poor, map-aware modelling can enhance localization accuracy by
up to 110% in certain scenarios.Comment: 13 pages, 11 figures, 1 table. IEEE Transactions on Wireless
Communications, 201
Advanced real-time indoor tracking based on the Viterbi algorithm and semantic data
A real-time indoor tracking system based on the Viterbi algorithm is developed. This Viterbi principle is used in combination with semantic data to improve the accuracy, that is, the environment of the object that is being tracked and a motion model. The starting point is a fingerprinting technique for which an advanced network planner is used to automatically construct the radio map, avoiding a time consuming measurement campaign. The developed algorithm was verified with simulations and with experiments in a building-wide testbed for sensor experiments, where a median accuracy below 2 m was obtained. Compared to a reference algorithm without Viterbi or semantic data, the results indicated a significant improvement: the mean accuracy and standard deviation improved by, respectively, 26.1% and 65.3%. Thereafter a sensitivity analysis was conducted to estimate the influence of node density, grid size, memory usage, and semantic data on the performance
Experimental evaluation of UWB indoor positioning for indoor track cycling
Accurate radio frequency (RF)-based indoor localization systems are more and more applied during sports. The most accurate RF-based localization systems use ultra-wideband (UWB) technology; this is why this technology is the most prevalent. UWB positioning systems allow for an in-depth analysis of the performance of athletes during training and competition. There is no research available that investigates the feasibility of UWB technology for indoor track cycling. In this paper, we investigate the optimal position to mount the UWB hardware for that specific use case. Different positions on the bicycle and cyclist were evaluated based on accuracy, received power level, line-of-sight, maximum communication range, and comfort. Next to this, the energy consumption of our UWB system was evaluated. We found that the optimal hardware position was the lower back, with a median ranging error of 22 cm (infrastructure hardware placed at 2.3 m). The energy consumption of our UWB system is also taken into account. Applied to our setup with the hardware mounted at the lower back, the maximum communication range varies between 32.6 m and 43.8 m. This shows that UWB localization systems are suitable for indoor positioning of track cyclists
- …