Critical market shares for investors and access seekers and competitive models in fibre networks

In this paper we consider and evaluate NGA architectures which meet the foreseeable future bandwidth demand and allow for highest bandwidth and quality for end-users and which no longer rely on copper cable elements. These are FTTH architectures only. From all available FTTH architectures we concentrate on the two most relevant architectures in Europe, Ethernet Point-to-Point and GPON. We assume the incumbent to be the investor in the NGA network infrastructure. If the NGA architecture is based on a Point-to-Point fibre plant we have modelled the competitors as using unbundled fibre loops as the wholesale access service. If the architecture is based on a Point-to-Multipoint fibre plant, we consider an active wholesale access (bitstream access) at the MPoP or at the core network node locations. Our basic modelling relies upon an engineering bottom-up cost modelling approach. We model the total cost of the services considered under efficient conditions, taking into account the cost of all network elements needed to produce these services in the specific architecture deployed. This approach is coherent with a Long Run Incremental Cost approach as applied in regulatory economics. Our modelling approach generates a broad set of results including the relative performance of the various network architectures, investment requirements and the degree of profitable coverage. In this paper, however, we focus on the results on the potential for competition and potential market structures in an NGA environment. --NGA architecture,cost modelling,FTTH,coverage,access models,unbundling

FTTx Access Networks: Technical Developments and Standardization

This chapter provides a review of factors driving technical development of broadband access networks, mostly toward higher bit rates and symmetrical services, together with a review of “fiber to the x” (FTTx) technologies for fixed access networks, including development and performance limitations of digital subscriber line (DSL) systems using twisted-pair copper cables, as well as fiber to the home systems. Characteristics and standardization of these systems are presented, together with a review of the two main competing broadband technologies: Data over cable service interface specification (DOCSIS) in coaxial cable TV networks and the 4G and 5G wireless networks. Additionally, a short list of recent developments in passive technologies (fibers, cables, and connectors) is included. Finally, the issues related to dismantling of the traditional copper telephone network and ensuring continuity of voice services in emergency situations are analyzed

Perbandingan Unjuk Kerja Transmisi Jaringan Fttb Menggunakan Gepon dan Gpon

Penelitian ini dilakukan untuk menganalisa perbandingan unjuk kerja transmisi teknologi GEPON dan GPON pada jaringan Fiber to the Building (FTTB). Pembahasan perbandingan menggunakan kedua teknologi PON tersebut untuk melihat performansi yang terbaik untuk di aplikasikan pada gedung bertingkat X menggunakan passive splitter dua tingkat dengan rasio perbandingan passive splitter maksimum 1:16. Unjuk kerja transmisi disimulasikan berdasarkan parameter link power budget, rise time budget serta nilai Bit Error Rate (BER) untuk kelayakan sistem jaringan. Perhitungan Unjuk jaringan dibagi menjadi bagian yaitu arah downstream dan arah upstream. Hasil perhitungan didapatkan pada arah downstream jarak terjauh, link GEPON menghasilkan nilai redaman sebesar 22.81 dB, BER sebesar 7x 10-29 dan nilai rise time sebesar 0,2506 ns. Pada link GPON memiliki redaman sebesar 25.94 dB, BER sebesar 3.62955 x 10-12 dan nilai rise time sebesar 0.25 ns. Pada arah upstream jarak terjauh, link GEPON menghasilkan nilai redaman sebesar 4.65 dB, dengan nilai BER ≈ 0 ,dan nilai rise time sebesar,2061 ns. Pada GPON memiliki redaman sebesar 4.65 dB, BER ≈ 0 dan nilai rise time sebesar 0,260 ns. Berdasarkan hasil unjuk kinerja kedua teknologi tersebut dapat disimpulkan bahwa unjuk kinerja teknologi GPON lebih baik dibandingkan teknologi GEPON untuk aplikasikan di jaringan optik gedung bertingkat

Smart PIN: performance and cost-oriented context-aware personal information network

The next generation of networks will involve interconnection of heterogeneous individual networks such as WPAN, WLAN, WMAN and Cellular network, adopting the IP as common infrastructural protocol and providing virtually always-connected network. Furthermore, there are many devices which enable easy acquisition and storage of information as pictures, movies, emails, etc. Therefore, the information overload and divergent content’s characteristics make it difficult for users to handle their data in manual way. Consequently, there is a need for personalised automatic services which would enable data exchange across heterogeneous network and devices. To support these personalised services, user centric approaches for data delivery across the heterogeneous network are also required. In this context, this thesis proposes Smart PIN - a novel performance and cost-oriented context-aware Personal Information Network. Smart PIN's architecture is detailed including its network, service and management components. Within the service component, two novel schemes for efficient delivery of context and content data are proposed: Multimedia Data Replication Scheme (MDRS) and Quality-oriented Algorithm for Multiple-source Multimedia Delivery (QAMMD). MDRS supports efficient data accessibility among distributed devices using data replication which is based on a utility function and a minimum data set. QAMMD employs a buffer underflow avoidance scheme for streaming, which achieves high multimedia quality without content adaptation to network conditions. Simulation models for MDRS and QAMMD were built which are based on various heterogeneous network scenarios. Additionally a multiple-source streaming based on QAMMS was implemented as a prototype and tested in an emulated network environment. Comparative tests show that MDRS and QAMMD perform significantly better than other approaches

The impact of alternative public policies on the deployment of new communications infrastructure - a survey

Our survey reviews the theoretical and empirical literature on all alternative policies to promote the deployment of new fiber-based communications infrastructure. Since such investment is expected to induce substantial positive externalities, dynamic efficiency becomes a particularly important policy goal. The available policies refer to i) different kinds of ex ante sector-specific regulations including cost-based access regulations as well as softer regulations such as regulatory holidays or geographically differentiated regulations, ii) deregulatory approaches based on effective competition law implementation and competitive market structures including allowance of co-investment models, and iii) public subsidies to cover non-profitable (“white”) areas. Our survey identifies the most significant research gaps, finding that numerous studies related to the impact of access regulations exist, whereas only a much smaller branch of literature addresses the impact of competition policies, and even fewer studies analyze the impact of public subsidies on new communications deployment. Moreover, our work allows for a generic framework for policy recommendations that identifies the comparative advantages of the individual policy options for different market structures and for varying degrees of externalities. We find that public subsidies are the dominant policy alternative in white areas, whereas access regulations can be the preferred policy in white or “grey” areas, where only monopoly structure or co-investment models lead to private investment. Deregulatory policies might be preferable in grey areas, if there is sufficient pressure from competitive outside options and if competition law is strong. Finally, deregulatory policies including soft regulation are the dominant policy in “black” areas, where several independent infrastructure operators exist

Optical Amplifiers for Access and Passive Optical Networks: A Tutorial

For many years, passive optical networks (PONs) have received a considerable amount of attention regarding their potential for providing broadband connectivity, especially in remote areas, to enable better life conditions for all citizens. However, it is essential to augment PONs with new features to provide high-quality connectivity without any transmission errors. For these reasons, PONs should exploit technologies for multigigabit transmission speeds and distances of tens of kilometers, which are costly features previously reserved for long-haul backbone networks only. An outline of possible optical amplification methods (2R) and electro/optical methods (3R) is provided with respect to specific conditions of deployment of PONs. We suggest that PONs can withstand such new requirements and utilize new backbone optical technologies without major flaws, such as the associated high cost of optical amplifiers. This article provides a detailed principle explanation of 3R methods (reamplification, reshaping, and retiming) to reach the extension of passive optical networks. The second part of the article focuses on optical amplifiers, their advantages and disadvantages, deployment, and principles. We suggest that PONs can satisfy such new requirements and utilize new backbone optical technologies without major flaws, such as the associated high cost

Deployment and operational aspects of rural broadband wireless access networks

Broadband speeds, Internet literacy and digital technologies have been steadily evolving over the last decade. Broadband infrastructure has become a key asset in today’s society, enabling innovation, driving economic efficiency and stimulating cultural inclusion. However, populations living in remote and rural communities are unable to take advantage of these trends. Globally, a significant part of the world population is still deprived of basic access to the Internet. Broadband Wireless Access (BWA) networks are regarded as a viable solution for providing Internet access to populations living in rural regions. In recent years, Wireless Internet Service Providers (WISPs) and community organizations around the world proved that rural BWA networks can be an effective strategy and a profitable business. This research began by deploying a BWA network testbed, which also provides Internet access to several remote communities in the harsh environment of the Scottish Highlands and Islands. The experience of deploying and operating this network pointed out three unresolved research challenges that need to be addressed to ease the path towards widespread deployment of rural BWA networks, thereby bridging the rural-urban broadband divide. Below, our research contributions are outlined with respect to these challenges. Firstly, an effective planning paradigm for deploying BWA networks is proposed: incremental planning. Incremental planning allows to anticipate return of investment and to overcome the limited network infrastructure (e.g., backhaul fibre links) in rural areas. I have developed a software tool called IncrEase and underlying network planning algorithms to consider a varied set of operational metrics to guide the operator in identifying the regions that would benefit the most from a network upgrade, automatically suggesting the best long-term strategy to the network administrator. Second, we recognize that rural and community networks present additional issues for network management. As the Internet uplink is often the most expensive part of the operational expenses for such deployments, it is desirable to minimize overhead for network management. Also, unreliable connectivity between the network operation centre and the network being managed can render traditional centralized management approaches ineffective. Finally, the number of skilled personnel available to maintain such networks is limited. I have developed a distributed network management platform called Stix for BWA networks, to make it easy to manage such networks for rural/community deployments and WISPs alike while keeping the network management infrastructure scalable and flexible. Our approach is based on the notions of goal-oriented and in-network management: administrators graphically specify network management activities as workflows, which are run in the network on a distributed set of agents that cooperate in executing those workflows and storing management information. The Stix system was implemented on low-cost and small form-factor embedded boards and shown to have a low memory footprint. Third, the research focus moves to the problem of assessing broadband coverage and quality in a given geographic region. The outcome is BSense, a flexible framework that combines data provided by ISPs with measurements gathered by distributed software agents. The result is a census (presented as maps and tables) of the coverage and quality of broadband connections available in the region of interest. Such information can be exploited by ISPs to drive their growth, and by regulators and policy makers to get the true picture of broadband availability in the region and make informed decisions. In exchange for installing the multi-platform measurement software (that runs in the background) on their computers, users can get statistics about their Internet connection and those in their neighbourhood. Finally, the lessons learned through this research are summarised. The outcome is a set of suggestions about how the deployment and operation of rural BWA networks, including our own testbed, can be made more efficient by using the proper tools. The software systems presented in this thesis have been evaluated in lab settings and in real networks, and are available as open-source software