Kinematic calibration of Orthoglide-type mechanisms from observation of parallel leg motions

The paper proposes a new calibration method for parallel manipulators that allows efficient identification of the joint offsets using observations of the manipulator leg parallelism with respect to the base surface. The method employs a simple and low-cost measuring system, which evaluates deviation of the leg location during motions that are assumed to preserve the leg parallelism for the nominal values of the manipulator parameters. Using the measured deviations, the developed algorithm estimates the joint offsets that are treated as the most essential parameters to be identified. The validity of the proposed calibration method and efficiency of the developed numerical algorithms are confirmed by experimental results. The sensitivity of the measurement methods and the calibration accuracy are also studied

Stiffness Analysis of Overconstrained Parallel Manipulators

The paper presents a new stiffness modeling method for overconstrained parallel manipulators with flexible links and compliant actuating joints. It is based on a multidimensional lumped-parameter model that replaces the link flexibility by localized 6-dof virtual springs that describe both translational/rotational compliance and the coupling between them. In contrast to other works, the method involves a FEA-based link stiffness evaluation and employs a new solution strategy of the kinetostatic equations for the unloaded manipulator configuration, which allows computing the stiffness matrix for the overconstrained architectures, including singular manipulator postures. The advantages of the developed technique are confirmed by application examples, which deal with comparative stiffness analysis of two translational parallel manipulators of 3-PUU and 3-PRPaR architectures. Accuracy of the proposed approach was evaluated for a case study, which focuses on stiffness analysis of Orthoglide parallel manipulator

Manipulator Performance Measures - A Comprehensive Literature Survey

Due to copyright restrictions of the publisher this item is embargoed and access to the file is restricted until a year after the publishing date.The final publication is available at www.springerlink.comPerformance measures are quintessential to the design, synthesis, study and application of robotic manipulators. Numerous performance measures have been defined to study the performance and behavior of manipulators since the early days of robotics; some more widely accepted than others, but their real significance and limitations have not always been well understood. The aim of this survey is to review the definition, classification, scope, and limitations of some of the widely used performance measures. This work provides an extensive bibliography that can be of help to researchers interested in studying and evaluating the performance and behavior of robotic manipulators. Finally, a few recommendations are proposed based on the review so that the most commonly noticed limitations can be avoided when new performance measures are proposed.http://link.springer.com/article/10.1007/s10846-014-0024-y

Simulation and Design of an Orientation Mechanism for Assembly Systems

The article focuses on methods for designing modular cable-driven orientation mechanisms that can be attached to robot systems that lack on rotational degrees of freedom. The approach yields assembly systems for high speed handling applications by reducing moving masses. For this purpose, a classification of feasible kinematic structures are given and resulting characteristics, like the orientation workspace, dexterity or its homogeneity, are analyzed. The mechanical design of a first prototype is subsequently presented along with a universal simulation tool for determining task-adapted powertrains using cables. Finally, results of first tests and possibilities for future developments are presented. © 2016 The Authors

Robust tuning of robot control systems

The computed torque control problem is examined for a robot arm with flexible, geared, joint drive systems which are typical in many industrial robots. The standard computed torque algorithm is not directly applicable to this class of manipulators because of the dynamics introduced by the joint drive system. The proposed approach to computed torque control combines a computed torque algorithm with torque controller at each joint. Three such control schemes are proposed. The first scheme uses the joint torque control system currently implemented on the robot arm and a novel form of the computed torque algorithm. The other two use the standard computed torque algorithm and a novel model following torque control system based on model following techniques. Standard tasks and performance indices are used to evaluate the performance of the controllers. Both numerical simulations and experiments are used in evaluation. The study shows that all three proposed systems lead to improved tracking performance over a conventional PD controller

Technology-Oriented Optimization of the Secondary Design Parameters of Robots for High-Speed Machining Applications

International audienceIn this paper, a new methodology for the optimal design of the secondary geometric parameters (shape of links, size of the platform, etc.) of parallel kinematic machine tools is proposed. This approach aims at minimizing the total mass of the robot under position accuracy constraints. This methodology is applied to two translational parallel robots with three degrees-of-freedom (DOF): the Y-STAR and the UraneSX. The proposed approach is able to speed up the design process and to help the designer to find more quickly a set of design parameters