On the Modeling, Analysis and Development of PMSM: For Traction and Charging Application

Permanent magnet synchronous machines (PMSMs) are widely implemented commercially available traction motors owing to their high torque production capability and wide operating speed range. However, to achieve significant electric vehicle (EV) global market infiltration in the coming years, the technological gaps in the technical targets of the traction motor must be addressed towards further improvement of driving range per charge of the vehicle and reduced motor weight and cost. Thus, this thesis focuses on the design and development of a novel high speed traction PMSM with improved torque density, maximized efficiency, reduced torque ripple and increased driving range suitable for both traction and integrated charging applications. First, the required performance targets are determined using a drive cycle based vehicle dynamic model, existing literature and roadmaps for future EVs. An unconventional fractional–slot distributed winding configuration with a coil pitch of 2 is selected for analysis due to their short end–winding length, reduced winding losses and improved torque density. For the chosen baseline topology, a non–dominated sorting genetic algorithm based selection of optimal odd slot numbers is performed for higher torque production and reduced torque ripple. Further, for the selected odd slot–pole combination, a novel star–delta winding configuration is modeled and analyzed using winding function theory for higher torque density, reduced spatial harmonics, reduced torque ripple and machine losses. Thereafter, to analyze the motor performance with control and making critical decisions on inter–dependent design parameter variations for machine optimization, a parametric design approach using a novel coupled magnetic equivalent circuit model and thermal model incorporating current harmonics for fractional–slot wound PMSMs was developed and verified. The developed magnetic circuit model incorporates all machine non–linearities including effects of temperature and induced inverter harmonics as well as the space harmonics in the winding inductances of a fractional–slot winding configuration. Using the proposed model with a pareto ant colony optimization algorithm, an optimal rotor design is obtained to reduce the magnet utilization and obtain maximized torque density and extended operating range. Further, the developed machine structure is also analyzed and verified for integrated charging operation where the machine’s winding inductances are used as line inductors for charging the battery thereby eliminating the requirement of an on–board charger in the powertrain and hence resulting in reduced weight, cost and extended driving range. Finally, a scaled–down prototype of the proposed PMSM is developed and validated with experimental results in terms of machine inductances, torque ripple, torque–power–speed curves and efficiency maps over the operating speed range. Subsequently, understanding the capabilities and challenges of the developed scaled–down prototype, a full–scale design with commercial traction level ratings, will be developed and analyzed using finite element analysis. Further recommendations for design improvement, future work and analysis will also be summarized towards the end of the dissertation

INVESTIGATION OF PERMANENT MAGNET SYNCHRONOUS MACHINES FOR DIRECT-DRIVE AND INTEGRATED CHARGING APPLICATIONS IN ELECTRIC VEHICLES

Electrified vehicles have proven to be potential candidates in the future for disrupting the automotive industry which is dominated by conventional gasoline vehicles. Electric vehicle (EV) technology has evolved rapidly over the last decade with new designs of EV drivetrain systems and components but no specific design has been able to serve as a solution that is affordable, reliable and performance-wise similar to existing gasoline vehicle equivalent. Extended driving range and overall cost of the vehicle still remain major bottlenecks. Understanding the state-of-the-art technologies and challenges in existing electric vehicle powertrain and charging systems, with major focus on permanent magnet synchronous machines & drives, this dissertation presents the following

Dual Benefits of Adding Damper Bars in PMSMs for Electrified Vehicles: Improved Machine Dynamics and Simplified Integrated Charging

Recently, due to rising environmental concerns and predicted future shortages of fossil fuels, there is a movement towards electrification of the transportation industry. A vast majority of the current research uses permanent magnet synchronous machines as the main traction motor in the drivetrain. This work proposes to add a special damper to a conventional permanent magnet synchronous machine to further improve the suitability of this machine for electrified vehicles. Firstly, an equivalent circuit model is developed to simulate the operation of a conventional PMSM with a damper. A synchronous loading test is proposed to determine the synchronous reactance of the machine. A modified blocked rotor test is used to find the damper parameters assuming that the rotor cage construction is known. Also a single-phase AC test that can be used to determine the damper parameters without prior knowledge of the rotor construction is proposed and presented as an alternative to the blocked rotor test. Thereafter, the models of a 50 kW traction motor and the same machine with damper bars are developed and simulated. The performance of both machines are compared and evaluated. The damper parameters are selected based on the dynamic and steady state performances. It is also shown that the machine with a damper has faster response to a three-phase short circuit fault. In addition, this study also looks into integrated charging which utilizes the existing drivetrain components for vehicle to grid and grid to vehicle operation. The damper is shown to be effective in mitigating the saliency condition caused by the buried magnets of IPMSM at stand-still condition. As a result, the machine windings can be used as line inductors for integrated charging

Modeling And Analysis Of Multi–Phase Permanent Magnet Synchronous Machines: Direct–Drive Electric Vehicle Application

In commercially existing electric vehicles (EVs), power is transferred from the motor to the wheels through a fixed gear mechanical transmission system. However, such a transmission system contributes to a power loss between 2% to 20% of output power of the motor depending on the operating speed and torque of the motor. Therefore, by removing the transmission, a direct–drive EV configuration is obtained with lower component count, improved motor to wheel efficiency and frequency dependent losses. However, challenges in developing a single on–board permanent magnet synchronous machine (PMSM) for such a configuration include high torque density, low torque ripple and high torque per permanent magnet (PM) volume. Therefore, this dissertation proposes a novel PMSM addressing the aforementioned challenges for a direct–drive application. Initially, the design targets, stator and rotor configuration and phase numbers of the PMSM are chosen to satisfy the requirements of a direct drive application. A novel torque and torque ripple model based on multiple reference frames is proposed, in which the torque ripple from spatial harmonics of flux, inductances and the time harmonics of stator currents are included. Using the analytical model, optimal slot–pole combination of the machine is selected based on adaptive gradient descent algorithm. A new consequent pole rotor topology is proposed to improve the torque density and torque per PM volume thereby reducing the usage of expensive rare earth magnets. The proposed PMSM with novel rotor is further improved in terms of torque density, losses and cost by performing an intensive structural optimization based on novel hybrid analytical model, finite element analysis and supervised learning. The optimized PMSM is then analyzed for various drive cycles and performance in terms of torque, speed and efficiency are discussed. A scaled–down prototype of the proposed PMSM is developed and comprehensive experimental analysis in terms of torque ripple, torque–speed characteristics and efficiency are performed under different speeds and load conditions and are compared with the results obtained from proposed analytical model

Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

Next generation electric drives for HEV/EV propulsion systems: Technology, trends and challenges

In recent decades, several factors such as environmental protection, fossil fuel scarcity, climate change and pollution have driven the research and development of a more clean and sustainable transport. In this context, several agencies and associations, such as the European Union H2020, the United States Council for Automotive Research (USCAR) and the United Nations Economic and Social Commission for Asia (UN ESCAP) have defined a set of quantitative and qualitative goals in terms of efficiency, reliability, power losses, power density and economical costs to be met by next generation hybrid and full electric vehicle (HEV/EV) drive systems. As a consequence, the automotive electric drives (which consists of the electric machine, power converter and their cooling systems) of future vehicles have to overcome a number of technological challenges in order to comply with the aforementioned technical objectives. In this context, this paper presents, for each component of the electric drive, a comprehensive review of the state of the art, current technologies, future trends and enabling technologies that will make possible next generation HEV/EVs.This work has been partially supported by the Department of Education, Linguistic Policy and Culture of the Basque Government within the fund for research groups of the Basque university system IT978-16, by the Ministerio de Economía y Competitividad of Spain within the project DPI2014-53685-C2-2-R and FEDER funds and by the Government of the Basque Country within the research program ELKARTEK as the project KT4TRANS (KK-2015/00047 and KK-2016/00061), as well as by the program to support the specialization of Ph.D researchers at UPV/EHU ESPDOC16/25

Design and Application of Electrical Machines

Electrical machines are one of the most important components of the industrial world. They are at the heart of the new industrial revolution, brought forth by the development of electromobility and renewable energy systems. Electric motors must meet the most stringent requirements of reliability, availability, and high efficiency in order, among other things, to match the useful lifetime of power electronics in complex system applications and compete in the market under ever-increasing pressure to deliver the highest performance criteria. Today, thanks to the application of highly efficient numerical algorithms running on high-performance computers, it is possible to design electric machines and very complex drive systems faster and at a lower cost. At the same time, progress in the field of material science and technology enables the development of increasingly complex motor designs and topologies. The purpose of this Special Issue is to contribute to this development of electric machines. The publication of this collection of scientific articles, dedicated to the topic of electric machine design and application, contributes to the dissemination of the above information among professionals dealing with electrical machines

Advanced Control and Estimation Concepts, and New Hardware Topologies for Future Mobility

According to the National Research Council, the use of embedded systems throughout society could well overtake previous milestones in the information revolution. Mechatronics is the synergistic combination of electronic, mechanical engineering, controls, software and systems engineering in the design of processes and products. Mechatronic systems put “intelligence” into physical systems. Embedded sensors/actuators/processors are integral parts of mechatronic systems. The implementation of mechatronic systems is consistently on the rise. However, manufacturers are working hard to reduce the implementation cost of these systems while trying avoid compromising product quality. One way of addressing these conflicting objectives is through new automatic control methods, virtual sensing/estimation, and new innovative hardware topologies

Proceedings of the 10th international conference on energy efficiency in motor driven systems (EEMODS' 2017)

The 10th International Conference on Energy Efficiency in Motor Driven Systems (EEMODS'17) was be held in Rome (Italy) on 6-8 September, 2017. The EEMODS conferences have been very successful in attracting distinguished and international presenters and attendees. The wide variety of stakeholders has included professionals involved in manufacturing, marketing, and promotion of energy efficient motors and motor driven systems and representatives from research labs, academia, and public policy. EEMODS’15 provided a forum to discuss and debate the latest developments in the impacts of electrical motor systems (advanced motors and drives, compressors, pumps, and fans) on energy and the environment, the policies and programmes adopted and planned, and the technical and commercial advances made in the dissemination and penetration of energy-efficient motor systems. In addition EEMODS covered also energy management in organizations, international harmonization of test method and financing of energy efficiency in motor systems. The Book of Proceedings contains the peer reviewed paper that have been presented at the conference.JRC.C.2-Energy Efficiency and Renewable

CPM LCA Database – Life Cycle Inventory Datasets

This report contains all 748 complete LCI datasets in the CPM LCA Database as published in 2020-11-20. Contents:Table 1 (pp 3-23) lists all LCI process names in alphabetical order.Table 2 (pp 24-2543) lists all complete LCI datasets in alphabetical order.For information about the database please refer to the Swedish Life Cycle Center, lifecyclecenter.se