Advanced signal processing techniques for the modeling and linearization of wireless communication systems.

Los nuevos estándares de comunicaciones digitales inalámbricas están impulsando el diseño de amplificadores de potencia con unas condiciones límites en términos de linealidad y eficiencia. Si bien estos nuevos sistemas exigen que los dispositivos activos trabajen cerca de la zona de saturación en busca de la eficiencia energética, la no linealidad inherente puede producir que el sistema muestre prestaciones inadecuadas en emisiones fuera de banda y distorsión en banda. La necesidad de técnicas digitales de compensación y la evolución en el diseño de nuevas arquitecturas de procesamiento de señales digitales posicionan a la predistorsión digital (DPD) como un enfoque práctico. Los predistorsionadores digitales se suelen basar en modelos de comportamiento como el memory polynomial (MP), el generalized memory polynomial (GMP) y el dynamic deviation reduction-based (DDR), etc. Los modelos de Volterra sufren la llamada "maldición de la dimensionalidad", ya que su complejidad tiende a crecer de forma exponencial a medida que el orden y la profundidad de memoria crecen. Esta tesis se centra principalmente en contribuir a la rama de conocimiento que enmarca el modelado y linealización de sistemas de comunicación inalámbrica. Los principales temas tratados son el modelo Volterra-Parafac y el modelo general de Volterra para sistemas complejos, los cuales tratan la estructura del DPD y las series de Volterra estructuradas con compressed-sensing y un método para la linealización en un rango de potencias de operación, que se centran en cómo los coeficientes de los modelos deben ser obtenidos.Premio Extraordinario de Doctorado U

Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method

This research work has made an effort to understand a novel line of radio frequency power amplifiers (RFPAs) that address initiatives for efficiency enhancement and linearity compensation to harmonize the fifth generation (5G) campaign. The objective is to enhance the performance of an orthogonal frequency division multiplexing-long term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the RFPA. The first part of this work explores the design and implementation of 15.5 W class AB RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement and redeeming exhibition of excessive power in the transmitter. Consequently, this work goes beyond improving efficiency over a linear RF power amplifier design; in which a comprehensive investigation on the fundamental and harmonic components of class F RF power amplifier using a load-pull approach to realise an optimum load impedance and the matching network is presented. The frequency bandwidth for both amplifiers was allocated to operate in the 2.620-2.690 GHz of mobile LTE applications. The second part explores the development of the behavioural model for the class AB power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier nonlinear distortion is approximated using a new linear parameter approximation approach. The first and second-order Hammerstein-Wiener using the Normalised Least Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of filtering process during linear memory cancellation. Moreover, an enhanced adaptive Wiener model is proposed to explore the nonlinear memory effect in the system. The proposed approach is able to balance between convergence speed and high-level accuracy when compared with behavioural modelling algorithms that are more complex in computation. Finally, the adaptive predistorter technique is implemented and verified in the OFDM transceiver test-bed. The results were compared against the computed one from MATLAB simulation for OFDM and 5G modulation transmitters. The results have confirmed the reliability of the model and the effectiveness of the proposed predistorter.Fundacão para a Ciência e a Tecnologia, Portugal, under European Union’s Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424 I also acknowledge the role of the National Space Research and Development Agency (NASRDA) Sokoto State Government Petroleum Technology Trust Fund (PTDF

Study of space condition effect and analyzing digital techniques for improving RF power amplifier's linearity and efficiency for small satellites

Objective of modern small satellite communication is to provide the end users with higher data rate downlink capability, in addition to, reliability and system efficiency. A significant device, with respect to power consumption and influence on system linearity, use in the transmission chain of small satellites, is power amplifier. The power amplifier tends to add distortion and non-linearity in the transmitted signal, when operating close to saturation point. For avoiding the non-linearity addition by the PA, it should be operated in linear region which causes the degradation in power efficiency. Therefore, for having the maximum power efficiency and improving linearity, the predistortion should be performed before inputting the signal to power amplifier. For compensating non-linear distortion, linearization scheme based on digital predistortion is used, which requires a feedback path for adaptation and extraction of new coefficients for DPD. Hence for making the DPD adaptive, ADC is required to add in the system. As a consequence of performing digital predistortion, the spectral regrowth occurs which causes the increase in bandwidth up to five times of original signal. Due to this reason, digital to analog converter has to sample the signal at five times of nyquist frequency which increases the cost and power consumption of DAC. This master thesis presents the methodology implementation for compensating the non-linear distortion in PAs, applicable for small satellite communication, with a cooperative technique of digital and analog predistortion. This thesis provides with the solution for the increased sampling rate of signal at analog to digital converter with a use of combination of digital and analog predistortion. The predistortion (digital and analog) is design to focus on maximizing the linearity and minimizing the distortion and spectral regrowth. While the adaptive scheme of combined digital predistortion and analog predistortion (simulated) is designed, with an ideal low-pass filter between them, for implementation ease of the digital-to-analog converter and decrease in signal sampling rate. The results provided in the thesis have shown that same linearity and efficiency can be achieved at amplifier's output by implementing the above mentioned solution with a benefit of reducing the signal sampling frequency at DAC. A comparative analysis of power amplifier behavior in various configuration is presented in the dissertation

Digital predistortion of RF amplifiers using baseband injection for mobile broadband communications

Radio frequency (RF) power amplifiers (PAs) represent the most challenging design parts of wireless transmitters. In order to be more energy efficient, PAs should operate in nonlinear region where they produce distortion that significantly degrades the quality of signal at transmitter’s output. With the aim of reducing this distortion and improve signal quality, digital predistortion (DPD) techniques are widely used. This work focuses on improving the performances of DPDs in modern, next-generation wireless transmitters. A new adaptive DPD based on an iterative injection approach is developed and experimentally verified using a 4G signal. The signal performances at transmitter output are notably improved, while the proposed DPD does not require large digital signal processing memory resources and computational complexity. Moreover, the injection-based DPD theory is extended to be applicable in concurrent dual-band wireless transmitters. A cross-modulation problem specific to concurrent dual-band transmitters is investigated in detail and novel DPD based on simultaneous injection of intermodulation and cross-modulation distortion products is proposed. In order to mitigate distortion compensation limit phenomena and memory effects in highly nonlinear RF PAs, this DPD is further extended and complete generalised DPD system for concurrent dual-band transmitters is developed. It is clearly proved in experiments that the proposed predistorter remarkably improves the in-band and out-of-band performances of both signals. Furthermore, it does not depend on frequency separation between frequency bands and has significantly lower complexity in comparison with previously reported concurrent dual-band DPDs

Compact Digital Predistortion for Multi-band and Wide-band RF Transmitters

This thesis is focusing on developing a compact digital predistortion (DPD) system which costs less DPD added power consumptions. It explores a new theory and techniques to relieve the requirement of the number of training samples and the sampling-rate of feedback ADCs in DPD systems. A new theory about the information carried by training samples is introduced. It connects the generalized error of the DPD estimation algorithm with the statistical properties of modulated signals. Secondly, based on the proposed theory, this work introduces a compressed sample selection method to reduce the number of training samples by only selecting the minimal samples which satisfy the foreknown probability information. The number of training samples and complex multiplication operations required for coefficients estimation can be reduced by more than ten times without additional calculation resource. Thirdly, based on the proposed theory, this thesis proves that theoretically a DPD system using memory polynomial based behavioural modes and least-square (LS) based algorithms can be performed with any sampling-rate of feedback samples. The principle, implementation and practical concerns of the undersampling DPD which uses lower sampling-rate ADC are then introduced. Finally, the observation bandwidth of DPD systems can be extended by the proposed multi-rate track-and-hold circuits with the associated algorithm. By addressing several parameters of ADC and corresponding DPD algorithm, multi-GHz observation bandwidth using only a 61.44MHz ADC is achieved, and demonstrated the satisfactory linearization performance of multi-band and continued wideband RF transmitter applications via extensive experimental tests

Modelação comportamental e pré-distorção digital de transmissores de rádio-frequência

Doutoramento em Engenharia ElectrotécnicaNos atuais sistemas de telecomunicações, os transmissores de rádio-frequência são desenvolvidos tendo maioritariamente em conta a eficiência da conversão da potência fornecida da fonte em potência de rádio-frequência. Este tipo de desenho resulta em amplificadores de potência com características de transmissão não-lineares, que distorcem severamente o envelope de informação no processo de amplificação, gerando distorção fora da banda. Para corrigir este problema utiliza-se um processo de compensação não linear, sendo que a pré-distorção digital se tem favorecido pela sua flexibilidade e precisão. Este método é tipicamente aplicado de uma forma cega, por força bruta até se obter a compensação desejada. No entanto, quando o método se mostra ineficaz, como se verificou em amplificadores de potência baseados em transístores de nitreto de gálio, é difícil saber o que modificar nos sistemas para os tornar de novo úteis. De forma a compreender e desenhar sistemas de pré-distorção digital robustos é necessário, por um lado, perceber o comportamento dos amplificadores de rádio-frequência, por outro, perceber as limitações e relações entre os modelos digitais e o comportamento real do amplificador. Nesse sentido, esta tese explora e descreve estas relações de forma a suportar a escolha de modelos de pré-distorção, desenvolve novos modelos baseados no comportamento dos transístores, e propõe métodos de caracterização para os amplificadores de RF.In current telecommunication systems, the main concern when developing the radio frequency transmitter is power efficiency. This type of design generally leads to a highly nonlinear transmission characteristic, mainly due to the radio frequency power amplifier. This nonlinear transmission severely distorts the information envelope, leading to spectral regrowth, out-of-band distortion. To correct this problem a nonlinear compensation process is employed. For this application, digital predistortion is generally favored for its flexibility and accuracy. Digital predistortion is mostly applied in a blind manner, using brute force until the desired compensation is achieved. Because of this, when the method fails, as it has in gallium nitride based power amplifiers, it is difficult to modify the system to achieve the desired results. To understand and design robust predistortion systems, it is both necessary to have knowledge of the power amplifiers’ behavior, on one hand, and understand the limitations and relations between the digital models and these behaviors, on the other. To do this, this thesis explores and describes these relationships, granting support to the digital predistortion model choice, it further develops new predistortion models based on the physics of the transistors’ behaviors, and it proposes methods for the characterization of radio frequency power amplifiers

Modeling Approaches for Active Antenna Transmitters

The rapid growth of data traffic in mobile communications has attracted interest to Multiple-Input-Multiple-Output (MIMO) communication systems at millimeter-wave (mmWave) frequencies. MIMO systems exploit active antenna arrays transmitter configurations to obtain higher energy efficiency and beamforming flexibility. The analysis of transmitters in MIMO systems becomes complex due to the close integration of several antennas and power amplifiers (PAs) and the problems associated with heat dissipation. Therefore, the transmitter analysis requires efficient joint EM, circuit, and thermal simulations of its building blocks, i.e., the antenna array and PAs. Due to small physical spacing at mmWave, bulky isolators cannot be used to eliminate unwanted interactions between PA and antenna array. Therefore, the mismatch and mutual coupling in the antenna array directly affect PA output load and PA and transmitter performance. On the other hand, PAs are the primary source of nonlinearity, power consumption, and heat dissipation in transmitters. Therefore, it is crucial to include joint thermal and electrical behavior of PAs in analyzing active antenna transmitters. In this thesis, efficient techniques for modeling active antenna transmitters are presented. First, we propose a hardware-oriented transmitter model that considers PA load-dependent nonlinearity and the coupling, mismatch, and radiated field of the antenna array. The proposed model is equally accurate for any mismatch level that can happen at the PA output. This model can predict the transmitter radiation pattern and nonlinear signal distortions in the far-field. The model\u27s functionality is verified using a mmWave active subarray antenna module for a beam steering scenario and by performing the over-the-air measurements. The load-pull modeling idea was also applied to investigate the performance of a mmWave spatial power combiner module in the presence of critical coupling effects on combining performance. The second part of the thesis deals with thermal challenges in active antenna transmitters and PAs as the main source of heat dissipation. An efficient electrothermal modeling approach that considers the thermal behavior of PAs, including self-heating and thermal coupling between the IC hot spots, coupled with the electrical behavior of PA, is proposed. The thermal model has been employed to evaluate a PA DUT\u27s static and dynamic temperature-dependent performance in terms of linearity, gain, and efficiency. In summary, the proposed modeling approaches presented in this thesis provide efficient yet powerful tools for joint analysis of complex active antenna transmitters in MIMO systems, including sub-systems\u27 behavior and their interactions

Performance of a behavioral model with long-term memory effects

This paper presents a new behavioral model for power amplifiers that accomplishes the capture of nonlinear low-frequency memory effects with reduced complexity and superior precision. It has been extensively evaluated with a commercial amplifier using wideband code-division multiple-access (WCDMA)-like modulated data with symbol rates in the range of 2 ksym/s to 1 Msym/s, and it is shown that the first dynamic reduction of the proposed model is successfully compared with other highly efficient methods in terms of complexity and generalization capacity.CICYT TEC2011-23559Junta de Andalucía P11-TIC-786

Joint compensation of I/Q impairments and PA nonlinearity in mobile broadband wireless transmitters

The main focus of this thesis is to develop and investigate a new possible solution for compensation of in-phase/quadrature-phase (I/Q) impairments and power amplifier (PA) nonlinearity in wireless transmitters using accurate, low complexity digital predistortion (DPD) technique. After analysing the distortion created by I/Q modulators and PAs together with nonlinear crosstalk effects in multi-branch multiple input multiple output (MIMO) wireless transmitters, a novel two-box model is proposed for eliminating those effects. The model is realised by implementing two phases which provide an optimisation of the identification of any system. Another improvement is the capability of higher performance of the system without increasing the computational complexity. Compared with conventional and recently proposed models, the approach developed in this thesis shows promising results in the linearisation of wireless transmitters. Furthermore, the two-box model is extended for concurrent dual-band wireless transmitters and it takes into account cross-modulation (CM) products. Besides, it uses independent processing blocks for both frequency bands and reduces the sampling rate requirements of converters (digital-to-analogue and analogue-to-digital). By using two phases for the implementation, the model enables a scaling down of the nonlinear order and the memory depth of the applied mathematical functions. This leads to a reduced computational complexity in comparison with recently developed models. The thesis provides experimental verification of the two-box model for multi-branch MIMO and concurrent dual-band wireless transmitters. Accordingly, the results ensure both the compensation of distortion and the performance evaluation of modern broadband wireless transmitters in terms of accuracy and complexity

Caracterização, modelação e compensação de efeitos de memória lenta em amplificadores de potência baseados em GAN HEMTS

Gallium nitride (GaN) high-electron-mobility transistors (HEMTs) have emerged as the most compelling technology for the transmission of highpower radio-frequency (RF) signals for cellular mobile communications and radar applications. However, despite their remarkable power capabilities, the deployment of GaN HEMT-based RF power amplifiers (PAs) in the mobile communications infrastructure is often ruled out in favor of alternative siliconbased technologies. One of the main reasons for this is the pervasiveness of nonlinear long-term memory effects in GaN HEMT technology caused by thermal and charge-trapping phenomena. While these effects can be compensated for using sophisticated digital predistortion algorithms, their implementation and model-extraction complexity—as well as the power necessary for their real-time execution—make them unsuitable for modern small cells and large-scale multiple-input multiple-output transceivers, where the power necessary for the linearization of each amplification element is of great concern. In order to address these issues and further the deployment of high-powerdensity high-efficiency GaN HEMT-based RF PAs in next-generation communications and radar applications, in this thesis we propose novel methods for the characterization, modeling, and compensation of long-term memory effects in GaN HEMT-based RF PAs. More specifically, we propose a method for the characterization of the dynamic self-biasing behavior of GaN HEMTbased RF PAs; multiple behavioral models of charge trapping and their implementation as analog electronic circuits for the accurate real-time prediction of the dynamic variation of the threshold voltage of GaN HEMTs; a method for the compensation of the pulse-to-pulse instability of GaN HEMT-based RF PAs for radar applications; and a hybrid analog/digital scheme for the linearization of GaN HEMT-based RF PAs for next-generation communications applications.Os transístores de alta mobilidade eletrónica de nitreto de gálio (GaN HEMTs) são considerados a tecnologia mais atrativa para a transmissão de sinais de radiofrequência de alta potência para comunicações móveis celulares e aplicações de radar. No entanto, apesar das suas notáveis capacidades de transmissão de potência, a utilização de amplificadores de potência (PAs) baseados em GaN HEMTs é frequentemente desconsiderada em favor de tecnologias alternativas baseadas em transístores de silício. Uma das principais razões disto acontecer é a existência pervasiva na tecnologia GaN HEMT de efeitos de memória lenta causados por fenómenos térmicos e de captura eletrónica. Apesar destes efeitos poderem ser compensados através de algoritmos sofisticados de predistorção digital, estes algoritmos não são adequados para transmissores modernos de células pequenas e interfaces massivas de múltipla entrada e múltipla saída devido à sua complexidade de implementação e extração de modelo, assim como a elevada potência necessária para a sua execução em tempo real. De forma a promover a utilização de PAs de alta densidade de potência e elevada eficiência baseados em GaN HEMTs em aplicações de comunicação e radar de nova geração, nesta tese propomos novos métodos de caracterização, modelação, e compensação de efeitos de memória lenta em PAs baseados em GaN HEMTs. Mais especificamente, nesta tese propomos um método de caracterização do comportamento dinâmico de autopolarização de PAs baseados em GaN HEMTs; vários modelos comportamentais de fenómenos de captura eletrónica e a sua implementação como circuitos eletrónicos analógicos para a previsão em tempo real da variação dinâmica da tensão de limiar de condução de GaN HEMTs; um método de compensação da instabilidade entre pulsos de PAs baseados em GaN HEMTs para aplicações de radar; e um esquema híbrido analógico/digital de linearização de PAs baseados em GaN HEMTs para comunicações de nova geração.Programa Doutoral em Telecomunicaçõe