Design Trade-offs for reliable On-Chip Wireless Interconnects in NoC Platforms

The massive levels of integration following Moore\u27s Law making modern multi-core chips prevail in various domains ranging from scientific applications to bioinformatics applications for consumer electronics. With higher and higher number of cores on the same die traditional bus based interconnections are no longer a scalable communication infrastructure. On-chip networks were proposed enabled a scalable plug-and-play mechanism for interconnecting hundreds of cores on the same chip. Wired interconnects between the cores in a traditional Network-on-Chip (NoC) system, becomes a bottleneck with increase in the number of cores thereby increasing the latency and energy to transmit signals over them. Hence, there has been many alternative emerging interconnect technologies proposed, namely, 3D, photonic and multi-band RF interconnects. Although they provide better connectivity, higher speed and higher bandwidth compared to wired interconnects; they also face challenges with heat dissipation and manufacturing difficulties. On-chip wireless interconnects is one other alternative proposed which doesn\u27t need physical interconnection layout as data travels over the wireless medium. They are integrated into a hybrid NOC architecture consisting of both wired and wireless links, which provides higher bandwidth, lower latency, lesser area overhead and reduced energy dissipation in communication. An efficient media access control (MAC) scheme is required to enhance the utilization of the available bandwidth. A token-passing protocol proposed to grant access of the wireless channel to competing transmitters. This limits the number of simultaneous users of the communication channel to one although multiple wireless hubs are deployed over the chip. In principle, a Frequency Division Multiple Access (FDMA) based medium access scheme would improve the utilization of the wireless resources. However, this requires design of multiple very precise, high frequency transceivers in non-overlapping frequency channels. Therefore, the scalability of this approach is limited by the state-of-the-art in transceiver design. The Code Division Multiple Access (CDMA) enables multiple transmitter-receiver pairs to send data over the wireless channel simultaneously. The CDMA protocol can significantly increase the performance of the system while lowering the energy dissipation in data transfer. The CDMA based MAC protocol outperforms the wired counterparts and several other wireless architectures proposed in literature in terms of bandwidth and packet energy dissipation. However, the reliability of CDMA based wireless NoC\u27s is limited, as the probability of error is eminent due to synchronization delays at the receiver. The thesis proposes the use of an advanced filter which improves the performance and also reduces the error due to synchronization delays. This thesis also proposes investigation of various channel modulation schemes on token passing wireless NoC\u27s to examine the performance and reliability of the system. The trade-off between performance and energy are established for the various conditions. The results are obtained using a modified cycle accurate simulator

Application priority framework for fixed mobile converged communication networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases

Design and Evaluation of the Efficiency of Channel Coding LDPC Codes for 5G Information Technology

This paper proposes a result of an investigation of a topical problem and the development of models for efficient coding in information networks based on codes with a low density of parity check. The main advantage of the technique is the presented recommendations for choosing a signal-code construction is carried out taking into account the code rate and the number of iterations decoding for envisaging the defined noise immunity indices. The noise immunity of signal-code constructions based on low-density codes has been increased by combining them with multi position digital modulation. This solution eventually allowed to develop a strategy for decoder designing of such codes and to optimize the code structure for a specific information network. To test the effectiveness of the proposed method, MATLAB simulations are carried out under for various Information channels binary symmetric channel (BSC), a channel with additive white Gaussian noise (AWGN), binary asymmetric channel (BAC), asymmetric channel Z type. In addition, different code rates were used during the experiment. The study of signal-code constructions with differential modulation is presented. The efficiency of different decoding algorithms is investigated. The advantage of the obtained results over the known ones consists in determining the maximum noise immunity for the proposed codes. The energy gain was on the order of 6 dB, and an increase in the number of decoding iterations from 3 to 10 leads to a gain in coding energy of 5 dB. Envisaged that the results obtained can be very useful in the development of practical coding schemes in 5G networks

Application of wavelets and artificial neural network for indoor optical wireless communication systems

Abstract This study investigates the use of error control code, discrete wavelet transform (DWT) and artificial neural network (ANN) to improve the link performance of an indoor optical wireless communication in a physical channel. The key constraints that barricade the realization of unlimited bandwidth in optical wavelengths are the eye-safety issue, the ambient light interference and the multipath induced intersymbol interference (ISI). Eye-safety limits the maximum average transmitted optical power. The rational solution is to use power efficient modulation techniques. Further reduction in transmitted power can be achieved using error control coding. A mathematical analysis of retransmission scheme is investigated for variable length modulation techniques and verified using computer simulations. Though the retransmission scheme is simple to implement, the shortfall in terms of reduced throughput will limit higher code gain. Due to practical limitation, the block code cannot be applied to the variable length modulation techniques and hence the convolutional code is the only possible option. The upper bound for slot error probability of the convolutional coded dual header pulse interval modulation (DH-PIM) and digital pulse interval modulation (DPIM) schemes are calculated and verified using simulations. The power penalty due to fluorescent light interference (FL I) is very high in indoor optical channel making the optical link practically infeasible. A denoising method based on a DWT to remove the FLI from the received signal is devised. The received signal is first decomposed into different DWT levels; the FLI is then removed from the signal before reconstructing the signal. A significant reduction in the power penalty is observed using DWT. Comparative study of DWT based denoising scheme with that of the high pass filter (HPF) show that DWT not only can match the best performance obtain using a HPF, but also offers a reduced complexity and design simplicity. The high power penalty due to multipath induced ISI makes a diffuse optical link practically infeasible at higher data rates. An ANN based linear and DF architectures are investigated to compensation the ISI. Unlike the unequalized cases, the equalized schemes don‘t show infinite power penalty and a significant performance improvement is observed for all modulation schemes. The comparative studies substantiate that ANN based equalizers match the performance of the traditional equalizers for all channel conditions with a reduced training data sequence. The study of the combined effect of the FLI and ISI shows that DWT-ANN based receiver perform equally well in the present of both interference. Adaptive decoding of error control code can offer flexibility of selecting the best possible encoder in a given environment. A suboptimal ?soft‘ sliding block convolutional decoder based on the ANN and a 1/2 rate convolutional code with a constraint length is investigated. Results show that the ANN decoder can match the performance of optimal Viterbi decoder for hard decision decoding but with slightly inferior performance compared to soft decision decoding. This provides a foundation for further investigation of the ANN decoder for convolutional code with higher constraint length values. Finally, the proposed DWT-ANN receiver is practically realized in digital signal processing (DSP) board. The output from the DSP board is compared with the computer simulations and found that the difference is marginal. However, the difference in results doesn‘t affect the overall error probability and identical error probability is obtained for DSP output and computer simulations

Recent Trends in Communication Networks

In recent years there has been many developments in communication technology. This has greatly enhanced the computing power of small handheld resource-constrained mobile devices. Different generations of communication technology have evolved. This had led to new research for communication of large volumes of data in different transmission media and the design of different communication protocols. Another direction of research concerns the secure and error-free communication between the sender and receiver despite the risk of the presence of an eavesdropper. For the communication requirement of a huge amount of multimedia streaming data, a lot of research has been carried out in the design of proper overlay networks. The book addresses new research techniques that have evolved to handle these challenges