Quality of Service optimisation framework for Next Generation Networks

Within recent years, the concept of Next Generation Networks (NGN) has become widely accepted within the telecommunication area, in parallel with the migration of telecommunication networks from traditional circuit-switched technologies such as ISDN (Integrated Services Digital Network) towards packet-switched NGN. In this context, SIP (Session Initiation Protocol), originally developed for Internet use only, has emerged as the major signalling protocol for multimedia sessions in IP (Internet Protocol) based NGN. One of the traditional limitations of IP when faced with the challenges of real-time communications is the lack of quality support at the network layer. In line with NGN specification work, international standardisation bodies have defined a sophisticated QoS (Quality of Service) architecture for NGN, controlling IP transport resources and conventional IP QoS mechanisms through centralised higher layer network elements via cross-layer signalling. Being able to centrally control QoS conditions for any media session in NGN without the imperative of a cross-layer approach would result in a feasible and less complex NGN architecture. Especially the demand for additional network elements would be decreased, resulting in the reduction of system and operational costs in both, service and transport infrastructure. This thesis proposes a novel framework for QoS optimisation for media sessions in SIP-based NGN without the need for cross-layer signalling. One key contribution of the framework is the approach to identify and logically group media sessions that encounter similar QoS conditions, which is performed by applying pattern recognition and clustering techniques. Based on this novel methodology, the framework provides functions and mechanisms for comprehensive resource-saving QoS estimation, adaptation of QoS conditions, and support of Call Admission Control. The framework can be integrated with any arbitrary SIP-IP-based real-time communication infrastructure, since it does not require access to any particular QoS control or monitoring functionalities provided within the IP transport network. The proposed framework concept has been deployed and validated in a prototypical simulation environment. Simulation results show MOS (Mean Opinion Score) improvement rates between 53 and 66 percent without any active control of transport network resources. Overall, the proposed framework comes as an effective concept for central controlled QoS optimisation in NGN without the need for cross-layer signalling. As such, by either being run stand-alone or combined with conventional QoS control mechanisms, the framework provides a comprehensive basis for both the reduction of complexity and mitigation of issues coming along with QoS provision in NGN

Context-awareness for ubiquitous media service delivery in next generation networks

Les récentes avancées technologiques permettent désormais la fabrication de terminaux mobiles de plus en plus compacts et dotés de plusieurs interfaces réseaux. Le nouveau modèle de consommation de médias se résume par le concept "Anytime, Anywhere, Any Device" et impose donc de nouvelles exigences en termes de déploiement de services ubiquitaires. Cependant la conception et le developpement de réseaux ubiquitaires et convergents de nouvelles générations soulèvent un certain nombre de défis techniques. Les standards actuels ainsi que les solutions commerciales pourraient être affectés par le manque de considération du contexte utilisateur. Le ressenti de l'utilisateur concernant certains services multimédia tels que la VoIP et l'IPTV dépend fortement des capacités du terminal et des conditions du réseau d'accès. Cela incite les réseaux de nouvelles générations à fournir des services ubiquitaires adaptés à l'environnement de l'utilisateur optimisant par la même occasion ses resources. L'IP Multimedia Subsystem (IMS) est une architecture de nouvelle génération qui centralise l'accès aux services et permet la convergence des réseaux fixe/mobile. Néanmoins, l'évolution de l'IMS est nécessaire sur les points suivants :- l'introduction de la sensibilité au contexte utilisateur et de la PQoS (Perceived QoS) : L'architecture IMS ne prend pas en compte l'environnement de l'utilisateur, ses préférences et ne dispose pas d'un méchanisme de gestion de PQOS. Pour s'assurer de la qualité fournit à l'utilisateur final, des informations sur l'environnement de l'utilisateur ainsi que ses préférences doivent transiter en cœur de réseau afin d'y être analysés. Ce traitement aboutit au lancement du service qui sera adapté et optimisé aux conditions observées. De plus pour le service d'IPTV, les caractéristiques spatio-temporelles de la vidéo influent de manière importante sur la PQoS observée côté utilisateur. L'adaptation des services multimédias en fonction de l'évolution du contexte utilisateur et de la nature de la vidéo diffusée assure une qualité d'expérience à l'utilisateur et optimise par la même occasion l'utilisation des ressources en cœur de réseau.- une solution de mobilité efficace pour les services conversationnels tels que la VoIP : Les dernières publications 3GPP fournissent deux solutions de mobilité: le LTE proposeMIP comme solution de mobilité alors que l'IMS définit une mobilité basée sur le protocoleapplicatif SIP. Ces standards définissent le système de signalisation mais ne s'avancent pas sur la gestion du flux média lors du changement d'interface réseau. La deuxième section introduit une étude comparative détaillée des solutions de mobilité dans les NGNs.Notre première contribution est la spécification de l'architecture globale de notre plateforme IMS sensible au contexte utilisateur réalisée au sein du projet Européen ADAMANTIUM. Nous détaillons tout d'abord le serveur MCMS intelligent placé dans la couche application de l'IMS. Cet élément récolte les informations de qualité de services à différents équipements réseaux et prend la décision d'une action sur l'un de ces équipements. Ensuite nous définissons un profil utilisateur permettant de décrire son environnement et de le diffuser en coeur de réseau. Une étude sur la prédiction de satisfaction utilisateur en fonction des paramètres spatio-temporels de la vidéo a été réalisée afin de connaître le débit idéal pour une PQoS désirée.Notre deuxième contribution est l'introduction d'une solution de mobilité adaptée aux services conversationnels (VoIP) tenant compte du contexte utilisateur. Notre solution s'intègre à l'architecture IMS existante de façon transparente et permet de réduire le temps de latence du handover. Notre solution duplique les paquets de VoIP sur les deux interfaces actives pendant le temps de la transition. Parallèlement, un nouvel algorithme de gestion de mémoire tampon améliore la qualité d'expérience pour le service de VoIP.The latest advances in technology have already defied Moore s law. Thanks to research and industry, hand-held devices are composed of high processing embedded systems enabling the consumption of high quality services. Furthermore, recent trends in communication drive users to consume media Anytime, Anywhere on Any Device via multiple wired and wireless network interfaces. This creates new demands for ubiquitous and high quality service provision management. However, defining and developing the next generation of ubiquitous and converged networks raise a number of challenges. Currently, telecommunication standards do not consider context-awareness aspects for network management and service provisioning. The experience felt by the end-user consuming for instance Voice over IP (VoIP) or Internet Protocol TeleVision (IPTV) services varies depending mainly on user preferences, device context and network resources. It is commonly held that Next Generation Network (NGN) should deliver personalized and effective ubiquitous services to the end user s Mobile Node (MN) while optimizing the network resources at the network operator side. IP Multimedia Subsystem (IMS) is a standardized NGN framework that unifies service access and allows fixed/mobile network convergence. Nevertheless IMS technology still suffers from a number of confining factors that are addressed in this thesis; amongst them are two main issues :The lack of context-awareness and Perceived-QoS (PQoS):-The existing IMS infrastructure does not take into account the environment of the user ,his preferences , and does not provide any PQoS aware management mechanism within its service provisioning control system. In order to ensure that the service satisfies the consumer, this information need to be sent to the core network for analysis. In order to maximize the end-user satisfaction while optimizing network resources, the combination of a user-centric network management and adaptive services according to the user s environment and network conditions are considered. Moreover, video content dynamics are also considered as they significantly impact on the deduced perceptual quality of IPTV services. -The lack of efficient mobility mechanism for conversational services like VoIP :The latest releases of Third Generation Partnership Project (3GPP) provide two types of mobility solutions. Long-Term Evolution (LTE) uses Mobile IP (MIP) and IMS uses Session Initiation Protocol (SIP) mobility. These standards are focusing on signaling but none of them define how the media should be scheduled in multi-homed devices. The second section introduces a detailed study of existing mobility solutions in NGNs. Our first contribution is the specification of the global context-aware IMS architecture proposed within the European project ADAptative Management of mediA distributioN based on saTisfaction orIented User Modeling (ADAMANTIUM). We introduce the innovative Multimedia Content Management System (MCMS) located in the application layer of IMS. This server combines the collected monitoring information from different network equipments with the data of the user profile and takes adaptation actions if necessary. Then, we introduce the User Profile (UP) management within the User Equipment (UE) describing the end-user s context and facilitating the diffusion of the end-user environment towards the IMS core network. In order to optimize the network usage, a PQoS prediction mechanism gives the optimal video bit-rate according to the video content dynamics. Our second contribution in this thesis is an efficient mobility solution for VoIP service within IMS using and taking advantage of user context. Our solution uses packet duplication on both active interfaces during handover process. In order to leverage this mechanism, a new jitter buffer algorithm is proposed at MN side to improve the user s quality of experience. Furthermore, our mobility solution integrates easily to the existing IMS platform.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF

Solution analysis of universal wireless joint point technologies for heterogeneous tactical networks

The scope of this thesis is to analyze the feasibility of having different wireless mesh network architectures transfer data to a wired network via a joint (universal) access point (UAP). Additionally this thesis analyzes the feasibility of using similar joint (universal) access point technology to allow heterogeneous wireless mesh network devices in close proximally to the UAP transmit data to/from each other via the UAP. This research also includes evaluating COTS tools for possible implementation of a joint access point as well as seeking partnership with private industry to assist in research efforts and/or the development or joint (universal) access point solution(s). The thesis concludes with a recommendation on application of universal joint point technology, to include recommendations for implementation of such technology in the Tactical Network Topology (TNT) environment.http://archive.org/details/solutionnalysiso109452951Approved for public release; distribution is unlimited

QoS constrained cellular ad hoc augmented networks

In this dissertation, based on different design criteria, three novel quality of service (QoS) constrained cellular ad hoc augmented network (CAHAN) architectures are proposed for next generation wireless networks. The CAHAN architectures have a hybrid architecture, in which each MT of CDMA cellular networks has ad hoc communication capability. The CAHAN architectures are an evolutionary approach to conventional cellular networks. The proposed architectures have good system scalability and high system reliability. The first proposed architecture is the QoS constrained minimum-power cellular ad hoc augmented network architecture (QCMP CAHAN). The QCMP CAHAN can find the optimal minimum-power routes under the QoS constraints (bandwidth, packet-delay, or packet-error-rate constraint). The total energy consumed by the MTs is lower in the case of QCMP CAHAN than in the case of pure cellular networks. As the ad hoc communication range of each MT increases, the total transmitted power in QCMP CAHAN decreases. However, due to the increased number of hops involved in information delivery between the source and the destination, the end-to-end delay increases. The maximum end-to-end delay will be limited to a specified tolerable value for different services. An MT in QCMP CAHAN will not relay any messages when its ad hoc communication range is zero, and if this is the case for all MTs, then QCMP CAHAN reduces to the traditional cellular network. A QoS constrained network lifetime extension cellular ad hoc augmented network architecture (QCLE CAHAN) is proposed to achieve the maximum network lifetime under the QoS constraints. The network lifetime is higher in the case of QCLE CAHAN than in the case of pure cellular networks or QCMP CAHAN. In QCLE CAHAN, a novel QoS-constrained network lifetime extension routing algorithm will dynamically select suitable ad-hoc-switch-to-cellular points (ASCPs) according to the MT remaining battery energy such that the selection will balance all the MT battery energy and maximizes the network lifetime. As the number of ASCPs in an ad hoc subnet decreases, the network lifetime will be extended. Maximum network lifetime can be increased until the end-to-end QoS in QCLE CAHAN reaches its maximum tolerable value. Geocasting is the mechanism to multicast messages to the MTs whose locations lie within a given geographic area (target area). Geolocation-aware CAHAN (GA CAHAN) architecture is proposed to improve total transmitted power expended for geocast services in cellular networks. By using GA CAHAN for geocasting, saving in total transmitted energy can be achieved as compared to the case of pure cellular networks. When the size of geocast target area is large, GA CAHAN can save larger transmitted energy

QoS management in UMTS terrestrial radio access FDD networks

This work investigates the role and importance of some of the key aspects of QoS planning, provisioning, monitoring and optimisation (QoS Management) for UMTS Terrestrial Radio Access (UTRA) FDD networks within the framework of the 3rd Generation Partnership Project (3GPP). Firstly, the differences between Quality of end user Experience (QoE) and Quality of Service (QoS) are explained. This is followed by a review of 3GPP requirements for QoS concept and architecture. Then all models and the main assumptions in this dissertation are presented. Based on these, original QoS mechanisms in the radio access network domain, means and methods for QoS provisioning, planning, monitoring and "optimisation" are discussed. Simulation results showed substantial spectral efficiency gains provided by service (or user) differentiation in UTRAN by means of priorities and differentiated parameter settings. When appropriately configured, the proposed QoS mechanisms can greatly reduce the need for bandwidth. Performance results proved also the proposed virtual time simulator to be an appropriate tool for service driven WCDMA radio interface dimensioning and detailed radio network planning. It is also shown that measuring QoS performance by a proper classification of counters (and or gauges), based on a particular subset of radio access bearer attributes, is a promising technique for assessing performances of service applications through WCDMA networks. With this new method there is no need to trace upper layer protocols at different interfaces or dumping data in mobile terminals. The proposed metrics allow operators to measure the bandwidth required for robust statistical reliability, to assess and exploit statistical sharing of resources, to configure QoS functions effectively, and to monitor QoE. The application of the proposed technique is not limited to the WCDMA Radio Network Subsystem (RNS), yet it can be deployed in any radio access and packet core network supporting mapping of performance indicators onto a particular subset of QoS attributes. Finally, in order to maximise the performance of the available services in UTRAN, at a given QoE, simulation results showed clear needs for the network administrator to adapt the parameter settings to diverse input application traffic conditions and the proposed genetic approach to be an appropriate solution space search algorithm for this purpose.reviewe

Linking session based services with transport plane resources in IP multimedia subsystems.

The massive success and proliferation of Internet technologies has forced network operators to recognise the benefits of an IP-based communications framework. The IP Multimedia Subsystem (IMS) has been proposed as a candidate technology to provide a non-disruptive strategy in the move to all-IP and to facilitate the true convergence of data and real-time multimedia services. Despite the obvious advantages of creating a controlled environment for deploying IP services, and hence increasing the value of the telco bundle, there are several challenges that face IMS deployment. The most critical is that posed by the widespread proliferation ofWeb 2.0 services. This environment is not seen as robust enough to be used by network operators for revenue generating services. However IMS operators will need to justify charging for services that are typically available free of charge in the Internet space. Reliability and guaranteed transport of multimedia services by the efficient management of resources will be critical to differentiate IMS services. This thesis investigates resource management within the IMS framework. The standardisation of NGN/IMS resource management frameworks has been fragmented, resulting in weak functional and interface specifications. To facilitate more coherent, focused research and address interoperability concerns that could hamper deployment, a Common Policy and Charging Control (PCC) architecture is presented that defines a set of generic terms and functional elements. A review of related literature and standardisation reveals severe shortcomings regarding vertical and horizontal coordination of resources in the IMS framework. The deployment of new services should not require QoS standardisation or network upgrade, though in the current architecture advanced multimedia services are not catered for. It has been found that end-to-end QoS mechanisms in the Common PCC framework are elementary. To address these challenges and assist network operators when formulating their iii NGN strategies, this thesis proposes an application driven policy control architecture that incorporates end-user and service requirements into the QoS negotiation procedure. This architecture facilitates full interaction between service control and resource control planes, and between application developers and the policies that govern resource control. Furthermore, a novel, session based end-to-end policy control architecture is proposed to support inter-domain coordination across IMS domains. This architecture uses SIP inherent routing information to discover the routes traversed by the signalling and the associated routes traversed by the media. This mechanism effectively allows applications to issue resource requests from their home domain and enable end-to-end QoS connectivity across all traversed transport segments. Standard interfaces are used and transport plane overhaul is not necessary for this functionality. The Common PCC, application driven and session based end-to-end architectures are implemented in a standards compliant and entirely open source practical testbed. This demonstrates proof of concept and provides a platform for performance evaluations. It has been found that while there is a cost in delay and traffic overhead when implementing the complete architecture, this cost falls within established criteria and will have an acceptable effect on end-user experience. The open nature of the practical testbed ensures that all evaluations are fully reproducible and provides a convenient point of departure for future work. While it is important to leave room for flexibility and vendor innovation, it is critical that the harmonisation of NGN/IMS resource management frameworks takes place and that the architectures proposed in this thesis be further developed and integrated into the single set of specifications. The alternative is general interoperability issues that could render end-to-end QoS provisioning for advanced multimedia services almost impossible

ADAPTIVE CAPACITY ALLOCATION IN MPLS NETWORKS

Traffic Congestion is one of the salient issues that affect overall network performance. Network traffic has become very dynamic due to a variety of factors, such as, the number of users varies with time of the day, multimedia applications, bursts in traffic due to a failure and so on. Recently, Multi-Protocol Label Switching (MPLS) networks have emerged as a technology with many promising features such as traffic engineering, QoS provisioning, and speeding up the traffic transmission. However, MPLS still suffers from the nonstationary/transient conditions that sometimes cause congestion. Actually, congestion does not always occur when the network is short capacity, but rather, when the network resources are not efficiently utilized. Thus, it is very important to develop an algorithm that efficiently and dynamically adjusts the available capacity. In this thesis, we propose an adaptive capacity allocation scheme. We have started our consideration with a single traffic class system that has dynamic traffic where traffic arrival is considered at the level of connection/call arrival. We assume that the virtual network for this traffic class operates as a loss system; i.e. if a connection does not find bandwidth, the connection is blocked and cleared from the system. Then, we extended our work to include the multiple traffic classes. Two cases have been studied and analyzed; when classes have no coupling and when they are coupled. The capacity allocation scheme is derived from a first-order, differential equation-based, fluid-flow model that captures the traffic dynamics. The scheme aims to maintain the connection blocking probability within a specified range by dynamically adjusting the allocated capacity. A fluid flow differential equation model is developed to model the changing traffic environment. Using the fluid flow model, Lyapunov Stability theory is used to derive a novel adaptive capacity adjustment scheme which guarantees overall system stability while maintaining the target QoS parameters. Numerical results are given which show that the Lyapunov control based scheme successfully provides the desired QoS requirements and performs better than existing schemes in the literature

MP-CFM: MPTCP-Based communication functional module for next generation ERTMS

184 p. El contenido de los capítulos 4,5,6,7,8 y 9 está sujeto a confidencialidadEl Sistema Europeo de Gestión del Tráfico Ferroviario (ERTMS, por sus siglasen inglés), fue originalmente diseñado para los ferrocarriles europeos. Sinembargo, a lo largo de las dos últimas décadas, este sistema se ha convertidoen el estándar de-facto para los servicios de Alta Velocidad en la mayoría depaíses desarrollados.El sistema ERTMS se compone de tres subsistemas principales: 1) el Sistemade Control Ferroviario Europeo (ETCS, por sus siglas en inglés), que actúacomo aplicación de señalización; 2) el sistema Euroradio, que a su vez estádividido en dos subsistemas, el Módulo de Seguridad Funcional (SFM, porsus siglas en inglés), y el Módulo de Comunicación Funcional (CFM, porsus siglas en inglés); y 3) el sistema de comunicaciones subyacente, GSM-R,que transporta la información intercambiada entre el sistema embarcado enel tren (OBU, por sus siglas en inglés) y el Centro de Bloqueo por Radio(RBC, por sus siglas en inglés). El sistema de señalización ETCS soporta tresniveles dependiendo del nivel de prestaciones soportadas. En el nivel 3 seintroduce la posibilidad de trabajar con bloques móviles en lugar de bloquesfijos definidos en la vía. Esto implica que la distancia de avance entre dos trenesconsecutivos puede ser reducida a una distancia mínima en la que se garanticela seguridad del servicio, aumentando por tanto la capacidad del corredorferroviario. Esta distancia de seguridad viene determinada por la combinaciónde la distancia de frenado del tren y el retraso de las comunicaciones deseñalización. Por lo tanto, se puede afirmar que existe una relación directaentre los retrasos y la confiabilidad de las transmisiones de las aplicaciones deseñalización y la capacidad operacional de un corredor ferroviario. Así pues,el estudio y mejora de los sistemas de comunicaciones utilizados en ERTMSjuegan un papel clave en la evolución del sistema ERTMS. Asimismo, unaoperatividad segura en ERTMS, desde el punto de vista de las comunicacionesimplicadas en la misma, viene determinada por la confiabilidad de lascomunicaciones, la disponibilidad de sus canales de comunicación, el retrasode las comunicaciones y la seguridad de sus mensajes.Unido este hecho, la industria ferroviaria ha venido trabajando en ladigitalización y la transición al protocolo IP de la mayor parte de los sistemasde señalización. Alineado con esta tendencia, el consorcio industrial UNISIGha publicado recientemente un nuevo modelo de comunicaciones para ERTMSque incluye la posibilidad, no solo de operar con el sistema tradicional,basado en tecnología de conmutación de circuitos, sino también con un nuevosistema basado en IP. Esta tesis está alineada con el contexto de migraciónactual y pretende contribuir a mejorar la disponibilidad, confiabilidad yseguridad de las comunicaciones, tomando como eje fundamental los tiemposde transmisión de los mensajes, con el horizonte puesto en la definición deuna próxima generación de ERTMS, definida en esta tesis como NGERTMS.En este contexto, se han detectado tres retos principales para reforzar laresiliencia de la arquitectura de comunicaciones del NGERTMS: 1) mejorarla supervivencia de las comunicaciones ante disrupciones; 2) superar laslimitaciones actuales de ERTMS para enviar mensajes de alta prioridad sobretecnología de conmutación de paquetes, dotando a estos mensajes de un mayorgrado de resiliencia y menor latencia respecto a los mensajes ordinarios; y3) el aumento de la seguridad de las comunicaciones y el incremento de ladisponibilidad sin que esto conlleve un incremento en la latencia.Considerando los desafíos previamente descritos, en esta tesis se proponeuna arquitectura de comunicaciones basada en el protocolo MPTCP, llamadaMP-CFM, que permite superar dichos desafíos, a la par que mantener laretrocompatibilidad con el sistema de comunicaciones basado en conmutaciónde paquetes recientemente propuesto por UNISIG. Hasta el momento, esta esla primera vez que se propone una arquitectura de comunicaciones completacapaz de abordar los desafíos mencionados anteriormente. Esta arquitecturaimplementa cuatro tipos de clase de servicio, los cuales son utilizados porlos paquetes ordinarios y de alta prioridad para dos escenarios distintos; unescenario en el que ambos extremos, el sistema embarcado o OBU y el RBC,disponen de múltiples interfaces de red; y otro escenario transicional en el cualel RBC sí tiene múltiples interfaces de red pero el OBU solo dispone de unaúnica interfaz. La arquitectura de comunicaciones propuesta para el entornoferroviario ha sido validada mediante un entorno de simulación desarrolladopara tal efecto. Es más, dichas simulaciones demuestran que la arquitecturapropuesta, ante disrupciones de canal, supera con creces en términos derobustez el sistema diseñado por UNISIG. Como conclusión, se puede afirmarque en esta tesis se demuestra que una arquitectura de comunicaciones basadade MPTCP cumple con los exigentes requisitos establecidos para el NGERTMSy por tanto dicha propuesta supone un avance en la evolución del sistema deseñalización ferroviario europeo

The privatization and liberalization of the Mexican telecommunications sector : new technology and policy alternatives

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1996.Includes bibliographical references (p. 117-120).by Héctor Javier Gallegos Martínez.M.S

A QoS-aware architecture for mobile internet

Tese de doutoramento InformáticaHoje em dia, as pessoas pretendem ter simultaneamente mobilidade, qualidade de serviço e estar sempre connectados à Internet. No intuito, de satisfazer estes clientes muito exigentes, os mercados das telecomunicações estão a impor novos e dificeis desafios às redes móveis, através da demanda, de heterogeneidade em termos de tecnologias de acesso rádio, novos serviços, niveis de qualidade de serviço adequados aos requisitos das aplicações de tempo real, elevada taxa de utilização do recursos disponiveis e melhor capacidade de desempenho. A Internet foi concebida para fornecer serviços sem qualquer tipo de garantias de qualidade às aplicações, apenas se comprometendo em oferecer o melhor serviço possível. No entanto, nos útlimos anos diversos esforços foram levados a cabo no sentido de dotar a Internet com o suporte à qualidade de serviço. Dos esforços desenvolvidos resultaram dois paradigmas para o suporte da qualidade de serviço: o modelo de Serviços Integrados (Integrated Services - IntServ) e o modelo de Serviços Diferenciados (Differentiated Services - DiffServ). Todavia, estes modelos de qualidade de serviço (QoS) foram concebido antes da existência da Internet móvel, portanto o desenvolvimento destes modelos não teve em consideração a questão da mobilidade. Por outro lado, o protocolo padrão actual para a Internet móvel, o MIPv6, revela algumas limitações nos cenários onde os utilizadores estão constantemente a moverem-se para outros pontos de acesso. Neste tipo de cenários, o MIPv6 introduz tempos de latência que não são sustentáveis para aplicações com requisitos de QoS mais restritos. Os factos revelados, demonstram que existe uma emergente necessidade de adaptar o actual protocolo de mobilidade, e também de adaptar os modelos de QoS, ou então criar modelos alternativos de QoS, para satisfazer às exigências do utilizador de hoje de redes móveis. Para alcançar este objectivo o presente trabalho propõe melhorias no sistema de gestão da mobilidade do protocolo MIPv6 e na gestão de recursos do modelo DiffServ. O MIPv6 foi melhorado para os cenários de micro-mobilidade com a abordagem para micro-mobilidade do F-HMIPv6. Enquanto que, o modelo DiffServ foi melhorado para os ambientes móveis com funcionalidades dinâmicas e adaptativas através da utilização de sinalização de QoS e da gestão distribuida dos recursos. A gestão da mobilidade e dos recursos foi também acoplada na solução proposta com o propósito de optimizar a utilização dos recursos num meio onde os recursos são tipicamente escassos. O modelo proposto é simples, é de fácil implementação, tem em consideração os requisitos da Internet móvel, e provou ser eficiente e capaz de fornecer serviços com QoS de elevada fiabilidade às aplicações.Over the last few years, several network communication challenges have arisen as a result of the growing number of users demanding Quality of Service (QoS) and mobility simultaneously. In order to satisfy these very demanding customers, the markets are imposing new challenges to wireless networks by demanding heterogeneity in terms of wireless access technologies, new services, suited QoS levels to real-time applications, high usability and improved performance. However, the Internet has been designed for providing application services without quality guarantees. That explains why, in the last years several efforts have been made to endow Internet with QoS support. From the developed efforts have resulted two QoS paradigms: Integrated Services (IntServ) which offers the guaranteed service model and the Differentiated Services (DiffServ) which offers the predictive service model. Although these QoS models have been designed before the existence of mobile Internet, so they do not consider the mobility issue. For instance, the guaranteed service model requires that whenever a Mobile Node (MN) wants to move to a new location, the allocated resources in the old path must be released and a new resource reservation in a new path must be made, resulting in extra signaling overhead, heavy processing and state load. Therefore, if handovers are frequent, large mobility and QoS signaling messages will be created in the access networks. Consequently, significant scalability problems may arise with this type of service model. The predicted service model, on the other hand, requires an additional features such as dynamic and adaptive resource management in order to be efficient in a very dynamic network such as a mobile network. A QoS solution for mobile environments must provide the capacity to adapt its resource utilization to a changeable nature of wireless networks because they have a more dynamic behavior due to incoming or outgoing handovers. For this reason, a QoS signalization for dynamic resource provisioning is necessary in order to supply adequate QoS levels to mobile users. On the other hand, the current standard protocol for mobile Internet, Mobile IPv6 (MIPv6), reveals limitations in scenarios where users are constantly moving to another point of attachment. In these situations, MIPv6 introduces latency times that are not sustainable for applications with strict QoS requirements. All things considered, reveal the emerging need to adapt the current standard mobility protocol and QoS models to satisfy today’s mobile user’s requirements. To accomplish this goal, the present work proposes enhancements in terms of the MIPv6 protocol mobility management scheme as well as in DiffServ QoS model resource management. The former was enhanced for micro-mobility scenarios with a specific combination of FMIPv6 (Fast Mobile IPv6) and HMIPv6 (Hierarchical Mobile IPv6) protocols. Whereas, the latter was enhanced for mobile environments with dynamic and adaptive features by using QoS signalization as well as distributed resource management. The mobility and resource management has also been coupled in the proposed solution with the objective of optimizing the resource utilization in a environment where resources are typically scarce. In order to assess model performance as well as its parametrization, a simulation model has been designed and implemented in the Network Simulator version two (NS-2). The model´s performance evaluation has been conducted based on the respective data acquired from statistical analysis in order to validate and consolidate the conclusions. Simulation results indicate that the solution avoids network congestion and starvation of less priority DiffServ classes. Moreover, the results also indicate that bandwidth utilization for priority classes increases and the QoS offered to MN’s applications, in each DiffServ class, remains unchangeable with MN mobility. The proposed model is simple and easy to implement. It considers mobile Internet requirements and has proven to be effective and capable of providing services with highly reliable QoS to mobile applications.Fundação para a Ciência e a Tecnologia (FCT) - Bolsa SFRH/BD/35245/200