Two novel nonlinear companding schemes with iterative receiver to reduce PAPR in multi-carrier modulation systems

Companding transform is an efficient and simple method to reduce the Peak-to-Average Power Ratio (PAPR) for Multi-Carrier Modulation (MCM) systems. But if the MCM signal is only simply operated by inverse companding transform at the receiver, the resultant spectrum may exhibit severe in-band and out-of-band radiation of the distortion components, and considerable peak regrowth by excessive channel noises etc. In order to prevent these problems from occurring, in this paper, two novel nonlinear companding schemes with a iterative receiver are proposed to reduce the PAPR. By transforming the amplitude or power of the original MCM signals into uniform distributed signals, the novel schemes can effectively reduce PAPR for different modulation formats and sub-carrier sizes. Despite moderate complexity increasing at the receiver, but it is especially suitable to be combined with iterative channel estimation. Computer simulation results show that the proposed schemes can offer good system performances without any bandwidth expansion

A Simplified Scheme of Estimation and Cancellation of Companding Noise for Companded Multicarrier Transmission Systems

Nonlinear companding transform is an efficient method to reduce the high peak-to-average power ratio (PAPR) of multicarrier transmission systems. However, the introduced companding noise greatly degrades the bit-error-rate (BER) performance of the companded multicarrier systems. In this paper, a simplified but effective scheme of estimation and cancellation of companding noise for the companded multicarrier transmission system is proposed. By expressing the companded signals as the summation of original signals added with a companding noise component, and subtracting this estimated companding noise from the received signals, the BER performance of the overall system can be significantly improved. Simulation results well confirm the great advantages of the proposed scheme over other conventional decompanding or no decompanding schemes under various situations

Analysis of Improved µ-Law Companding Technique for OFDM Systems

YesHigh Peak-to-Average-Power Ratio (PAPR) of transmitted signals is a common problem in broadband telecommunication systems using an orthogonal frequency division multiplexing (OFDM) modulation scheme, as it increases transmitter power consumption. In consumer applications where it impacts mobile terminal battery life and infrastructure running costs, this is a major factor in customer satisfaction. Companding techniques have been recently used to alleviate this high PAPR. In this paper, a companding scheme with an offset, amidst two nonlinear companding levels, is proposed to achieve better PAPR reduction while maintaining an acceptable bit error rate (BER) level, resulting in electronic products of higher power efficiency. Study cases have included the effect of companding on the OFDM signal with and without an offset. A novel closed-form approximation for the BER of the proposed companding scheme is also presented, and its accuracy is compared against simulation results. A method for choosing best companding parameters is presented based on contour plots. Practical emulation of a real time OFDM-based system has been implemented and evaluated using a Field Programmable Gate Array (FPGA)

PAPR Reduction in OFDM System by using Nonlinear Companding Technique

Non linear companding technique is proposed to reduce the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing system. Use of companding for peak - to - average - power ratio (PAPR) control is explored for a link involving a non - linear transmit power amplifier with orthogonal frequency division multiplexing (OFDM). This paper analyses the improvement in bit error rate (BER) and overall system performance by employing non linear companding technique for PAPR reduction in digital video broadcasting (DVB - T) system

New Hybrid Schemes for PAPR Reduction in OFDM Systems

الـ 3GPP قدمت مشروع LTE لتلبية الطلبات المتزايدة لخدمات الاتصالات ذات السرعة العالية والجودة العالية. يستخدم نظام الـ LTE تقنية مضاعفة تقسيم التردد المتعامد (OFDM) في شكل (OFDMA) في الوصلة الهابطة (Downlink) وشكل الـ (SCFDMA) في الوصلة الصاعدة (Uplink) مجتمعة مع تقنية الـ MIMO لتقديم معدل بيانات عالي، قدرة عالية، وحصانة ضد القنوات متعددة المسارات. ومع ذلك لا يزال ارتفاع نسبة القدرة العظمة إلى المتوسط (PAPR) لإشارة الـ LTE المرسلة هي المشكلة الرئيسية التي تعمل على تدهور كفاءة النظام بشك عام وإمكانية استهلاك الطاقة. لذلك كرست الكثير من البحوث للحد من تدهور الأداء بسبب مشكلة الـ PAPR في أنظمة LTE-OFDM. تعتبر طرق ضغط الإشارة (Companding Methods) جزءاً من الطرق المعروفة والتي تعتبر سهلة ومنخفضة التعقيد، وبلا قيود على شكل التضمين وحجم عدد الحوامل (Subcarrier Size)، ولها خصائص طيفية جيدة، ومع ذلك فإن هذه الطرق تقلل الـ PAPR بمقدار ضئيل. وقد اقترح هذا البحث سبعة طرق هجينة جديدة على أساس مزيج من Zaddoff Chu Matrix Transform (ZCT) مع ست أساليب مختلفة من طرق ضغط الإشارة وهي Rooting Companding (RCT)، New Error Function Companding (NERF)، Absolute Exponential Companding (AEXP)، Logarithmic Rooting Companding (LogR)، Cosine Companding (COS)، وTangent Rooting Companding (TanhR). بالإضافة إلى ذلك تم تطوير الطريقة الهجينة السابعة وتجمع الـ Zaddoff Chu Matrix Transform (ZCT) مع طريقة جديدة مقترحة تسمى Advanced AEXP (AAEXP). أظهرت النتائج أن هذه الطرق المتطورة تجمع بين خصائص طريقة الـ ZCT مع خصائص طرق ضغط الإشارة، وتحقق أداء أمثل وانخفاضاً أفضل من حيث PAPR وBER. كما حققت طريقة الـ ZCT+AAEXP أفضل النتائج مقارنة بالطرق الأخرى.The 3rd Generation Partnership Project (3GPP) introduced LTE to meet increasingly demands for communication services with high speed and quality. LTE uses OFDM in the form of OFDMA in the downlink and SCFDMA in the uplink combined with MIMO offering high data rate, high capacity and immunity against multipath channels. However, still the high PAPR of the LTE transmitted signal is the major problem affecting overall system performance degradation and power efficiency. A plenty of research has been devoted to reduce the performance degradation due to the PAPR problem inherent to LTE OFDM systems. A portion of the current techniques such companding methods have low-complexity, no constraint on modulation format and subcarrier size, good distortion and spectral properties; however, they have limited PAPR reduction capabilities. This paper proposes seven new hybrid schemes including Zaddoff Chu Matrix Transform (ZCT) precoding and six modern companding methods; Rooting Companding (RCT), New Error Function Companding (NERF), Absolute Exponential Companding (AEXP), Logarithmic Rooting Companding (LogR), Cosine Companding (COS) and Tangent Rooting Companding (TanhR) companding. Furthermore, the seventh proposed hybrid scheme has been added incorporating ZCT precoding with new proposed companding called Advanced AEXP (AAEXP) companding. The developed methods are combining properties of both ZCT & Compandings, and achieving superior PAPR performance and optimal BER. Simulations results illustrate that the new seven proposed hybrid schemes can achieve better PAPR reduction, and BER performance and the best achievement has been achieved by ZCT+AAEXP scheme

PAPR Reduction Using Low Complexity PTS to Construct OFDM Signal

Orthogonal frequency division multiplexing has become evident due to its higher frequency multiplicity to achieve high data rate and greater immunity to multipath fading. The imperative drawback of OFDM is its high peak-to-average power ratio which results in power inefficiency. There are numerous techniques used to overcome problem of high PAPR in OFDM modulation system. Partial transmit sequence (PTS) is most prominent peak-to-average power ratio (PAPR) reduction techniques proposed for orthogonal frequency-division multiplexing (OFDM) systems. The main drawback of the conventional PTS (C-PTS) is its higher computational complexity and transmission of several side information bits. A new PTS with simple detector is recommended here to deal with these drawbacks of C-PTS. The candidates can be generated by cyclically shift of each sub block sequence in time domain and combining them in a recursive manner. At the receiver, by using the natural diversity of phase constellation for different candidates, the detector can successfully regain the original signal without side information. The probability of detecting failure of the side information found that detector can work without any side information with high reliability. The scheme in this paper achieves almost the same bit error rate (BER) performance as the C-PTS with perfect side information, under additive white Gaussian noise (AWGN) channel and Rayleigh fading channel

Performance Analysis of OFDM with Peak Cancellation Under EVM and ACLR Restrictions

This paper presents performance analysis of an adaptive peak cancellation method to reduce the high peak-toaverage power ratio (PAPR) for OFDM systems, while keeping the out-of-band (OoB) power leakage as well as an in-band distortion power below the pre-determined level. In this work, the increase of adjacent leakage power ratio (ACLR) and error vector magnitude (EVM) are estimated recursively using the detected peak amplitude. We present analytical framework for OFDM-based systems with theoretical bit error rate (BER) representations and detection of optimum peak threshold based on predefined EVM and ACLR requirements. Moreover, the optimum peak detection threshold is selected based on the oretical design to maintain the predefined distortion level. Thus, their degradations are automatically restricted below the pre-defined levels which correspond to target OoB radiation. We also discuss the practical design of peak-cancellation (PC) signal with target OoB radiation and in-band distortion through optimizing the windowing size of the PC signal. Numerical results show the improvements with respect to both achievable bit error rate (BER) and PAPR with the PC method in eigen-beam space division multiplexing (E-SDM) systems under restriction of OoB power radiation. It can also be seen that the theoretical BER shows good agreements with simulation results

Boosted PTS Method with Mu-Law Companding Techniques for PAPR Reduction in OFDM Systems

This paper proposes an enhanced PAPR reduction technique which combines an enhanced PTS method with Mu-Law companding. The enhanced PTS method improves performances in both the partitioning and phase rotation steps. Enhancement in partitioning is achieved through a judicious incorporation of AP-PTS scheme into the IP-PTS. As for phase rotation, an optimal set of rotation vectors is derived based on the correlation properties of candidate signals. The PAPR reduction of this enhanced PTS method is further improved by annexing Mu-Law companding at the end of the enhanced PTS. This application of Mu-Law characteristic in the time domain of OFDM signal significantly improves the PAPR reduction capability of the approach. Simulation results show that the PAPR performance of the enhanced PTS method with Mu-Law companding technique on various scenarios with different modulation schemes is better than that of the PRP-PTS. This approach can be considered as a very attractive candidate for achieving a significant reduction of PAPR, while maintaining a low computational complexity

Companding and Predistortion Techniques for Improved Efficiency and Performance in SWIPT

In this work, we analyze how the use of companding techniques, together with digital predistortion (DPD), can be leveraged to improve system efficiency and performance in simultaneous wireless information and power transfer (SWIPT) systems based on power splitting. By taking advantage of the benefits of each of these well-known techniques to mitigate non-linear effects due to power amplifier (PA) and energy harvesting (EH) operation, we illustrate how DPD and companding can be effectively combined to improve the EH efficiency while keeping unalterable the information transfer performance. We establish design criteria that allow the PA to operate in a higher efficiency region so that the reduction in peak-to-average power ratio over the transmitted signal is translated into an increase in the average radiated power and EH efficiency. The performance of DPD and companding techniques is evaluated in a number of scenarios, showing that a combination of both techniques allows to significantly increase the power transfer efficiency in SWIPT systems.Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl