A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

Deliverable DJRA1.2. Solutions and protocols proposal for the network control, management and monitoring in a virtualized network context

This deliverable presents several research proposals for the FEDERICA network, in different subjects, such as monitoring, routing, signalling, resource discovery, and isolation. For each topic one or more possible solutions are elaborated, explaining the background, functioning and the implications of the proposed solutions.This deliverable goes further on the research aspects within FEDERICA. First of all the architecture of the control plane for the FEDERICA infrastructure will be defined. Several possibilities could be implemented, using the basic FEDERICA infrastructure as a starting point. The focus on this document is the intra-domain aspects of the control plane and their properties. Also some inter-domain aspects are addressed. The main objective of this deliverable is to lay great stress on creating and implementing the prototype/tool for the FEDERICA slice-oriented control system using the appropriate framework. This deliverable goes deeply into the definition of the containers between entities and their syntax, preparing this tool for the future implementation of any kind of algorithm related to the control plane, for both to apply UPB policies or to configure it by hand. We opt for an open solution despite the real time limitations that we could have (for instance, opening web services connexions or applying fast recovering mechanisms). The application being developed is the central element in the control plane, and additional features must be added to this application. This control plane, from the functionality point of view, is composed by several procedures that provide a reliable application and that include some mechanisms or algorithms to be able to discover and assign resources to the user. To achieve this, several topics must be researched in order to propose new protocols for the virtual infrastructure. The topics and necessary features covered in this document include resource discovery, resource allocation, signalling, routing, isolation and monitoring. All these topics must be researched in order to find a good solution for the FEDERICA network. Some of these algorithms have started to be analyzed and will be expanded in the next deliverable. Current standardization and existing solutions have been investigated in order to find a good solution for FEDERICA. Resource discovery is an important issue within the FEDERICA network, as manual resource discovery is no option, due to scalability requirement. Furthermore, no standardization exists, so knowledge must be obtained from related work. Ideally, the proposed solutions for these topics should not only be adequate specifically for this infrastructure, but could also be applied to other virtualized networks.Postprint (published version

Information Centric Networking in the IoT: Experiments with NDN in the Wild

This paper explores the feasibility, advantages, and challenges of an ICN-based approach in the Internet of Things. We report on the first NDN experiments in a life-size IoT deployment, spread over tens of rooms on several floors of a building. Based on the insights gained with these experiments, the paper analyses the shortcomings of CCN applied to IoT. Several interoperable CCN enhancements are then proposed and evaluated. We significantly decreased control traffic (i.e., interest messages) and leverage data path and caching to match IoT requirements in terms of energy and bandwidth constraints. Our optimizations increase content availability in case of IoT nodes with intermittent activity. This paper also provides the first experimental comparison of CCN with the common IoT standards 6LoWPAN/RPL/UDP.Comment: 10 pages, 10 figures and tables, ACM ICN-2014 conferenc

Network Infrastructures for Highly Distributed Cloud-Computing

Software-Defined-Network (SDN) is emerging as a solid opportunity for the Network Service Providers (NSP) to reduce costs while at the same time providing better and/or new services. The possibility to flexibly manage and configure highly-available and scalable network services through data model abstractions and easy-to-consume APIs is attractive and the adoption of such technologies is gaining momentum. At the same time, NSPs are planning to innovate their infrastructures through a process of network softwarisation and programmability. The SDN paradigm aims at improving the design, configuration, maintenance and service provisioning agility of the network through a centralised software control. This can be easily achievable in local area networks, typical of data-centers, where the benefits of having programmable access to the entire network is not restricted by latency between the network devices and the SDN controller which is reasonably located in the same LAN of the data path nodes. In Wide Area Networks (WAN), instead, a centralised control plane limits the speed of responsiveness in reaction to time-constrained network events due to unavoidable latencies caused by physical distances. Moreover, an end-to-end control shall involve the participation of multiple, domain-specific, controllers: access devices, data-center fabrics and backbone networks have very different characteristics and their control-plane could hardly coexist in a single centralised entity, unless of very complex solutions which inevitably lead to software bugs, inconsistent states and performance issues. In recent years, the idea to exploit SDN for WAN infrastructures to connect multiple sites together has spread in both the scientific community and the industry. The former has produced interesting results in terms of framework proposals, complexity and performance analysis for network resource allocation schemes and open-source proof of concept prototypes targeting SDN architectures spanning multiple technological and administrative domains. On the other hand, much of the work still remains confined to the academy mainly because based on pure Openflow prototype implementation, networks emulated on a single general-purpose machine or on simulations proving algorithms effectiveness. The industry has made SDN a reality via closed-source systems, running on single administrative domain networks with little if no diversification of access and backbone devices. In this dissertation we present our contributions to the design and the implementation of SDN architectures for the control plane of WAN infrastructures. In particular, we studied and prototyped two SDN platforms to build a programmable, intent-based, control-plane suitable for the today highly distributed cloud infrastructures. Our main contributions are: (i) an holistic and architectural description of a distributed SDN control-plane for end-end QoS provisioning; we compare the legacy IntServ RSVP protocol with a novel approach for prioritising application-sensitive flows via centralised vantage points. It is based on a peer-to-peer architecture and could so be suitable for the inter-authoritative domains scenario. (ii) An open-source platform based on a two-layer hierarchy of network controllers designed to provision end-to-end connectivity in real networks composed by heterogeneous devices and links within a single authoritative domain. This platform has been integrated in CORD, an open-source project whose goal is to bring data-center economics and cloud agility to the NSP central office infrastructures, combining NFV (Network Function Virtualization), SDN and the elasticity of commodity clouds. Our platform enables the provisioning of connectivity services between multiple CORD sites, up to the customer premises. Thus our system and software contributions in SDN has been combined with a NFV infrastructure for network service automation and orchestration