Designing experiments using digital fabrication in structural dynamics

In engineering, traditional approaches aimed at teaching concepts of dynamics to engineering students include the study of a dense yet sequential theoretical development of proofs and exercises. Structural dynamics are seldom taught experimentally in laboratories since these facilities should be provided with expensive equipment such as wave generators, data-acquisition systems, and heavily wired deployments with sensors. In this paper, the design of an experimental experience in the classroom based upon digital fabrication and modeling tools related to structural dynamics is presented. In particular, all experimental deployments are conceived with low-cost, open-source equipment. The hardware includes Arduino-based open-source electronics whereas the software is based upon object-oriented open-source codes for the development of physical simulations. The set of experiments and the physical simulations are reproducible and scalable in classroom-based environments.Peer ReviewedPostprint (author's final draft

Open source bioimage informatics for cell biology

Significant technical advances in imaging, molecular biology and genomics have fueled a revolution in cell biology, in that the molecular and structural processes of the cell are now visualized and measured routinely. Driving much of this recent development has been the advent of computational tools for the acquisition, visualization, analysis and dissemination of these datasets. These tools collectively make up a new subfield of computational biology called bioimage informatics, which is facilitated by open source approaches. We discuss why open source tools for image informatics in cell biology are needed, some of the key general attributes of what make an open source imaging application successful, and point to opportunities for further operability that should greatly accelerate future cell biology discovery

The Asolant/Rubin-5 Technology Demonstration Mission - System Description and First Flight Results

This paper addresses the Asolant/Rubin-5 flight experiment conducted onboard the upper stage of a Cosmos rocket in late 2005. The main objective of the project was to flight-qualify a newly developed combined solar cell/antenna device, the so-called Advanced SOLar ANTenna (ASOLANT) technology. In order to assess both, the reception as well as emission of R/F signals, two different devices were involved in the mission. One was linked to a space-borne Phoenix-S GPS receiver to examine the receiving performance. A second device was designed to send out S-Band beacon signals generated by the SAFIR-S amateur radio transmitter to evaluate the radiation characteristics. Moreover, both ASOLANT devices supplied the electrical power for the onboard systems. Telecommand and telemetry functionalities were provided by an ORBCOMM communicator making use of the ORBCOMM satellite network to relay data between space and ground. This unit, furthermore, served as onboard computer. The experiment was launched along with eight multinational payload satellites. It was designed to remain attached to the rockets upper stage after burnout. Due to a separation failure of one of the copassengers, the primary mission objectives could not be fully met. Nevertheless, a sufficient number of data was retrieved to confirm the good overall performance of the ASOLANT devices. Roughly ten month after the launch, still most system components are operational and experiment data are transmitted to ground. Following a description of the main flight system components and the overall ystem architecture, the paper summarizes the hitherto obtained experiment results

Using protocol analysis to explore the creative requirements engineering process

Protocol analysis is an empirical method applied by researchers in cognitive psychology and behavioural analysis. Protocol analysis can be used to collect, document and analyse thought processes by an individual problem solver. In general, research subjects are asked to think aloud when performing a given task. Their verbal reports are transcribed and represent a sequence of their thoughts and cognitive activities. These verbal reports are analysed to identify relevant segments of cognitive behaviours by the research subjects. The analysis results may be cross-examined (or validated through retrospective interviews with the research subjects). This paper offers a critical analysis of this research method, its approaches to data collection and analysis, strengths and limitations, and discusses its use in information systems research. The aim is to explore the use of protocol analysis in studying the creative requirements engineering process.<br /

Technology for the Future: In-Space Technology Experiments Program, part 2

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiments Program In-STEP 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/ university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part two of two parts and contains the critical technology presentations for the eight theme elements and a summary listing of critical space technology needs for each theme

An approach for real world data modelling with the 3D terrestrial laser scanner for built environment

Capturing and modelling 3D information of the built environment is a big challenge. A number of techniques and technologies are now in use. These include EDM, GPS, and photogrammetric application, remote sensing and traditional building surveying applications. However, use of these technologies cannot be practical and efficient in regard to time, cost and accuracy. Furthermore, a multi disciplinary knowledge base, created from the studies and research about the regeneration aspects is fundamental: historical, architectural, archeologically, environmental, social, economic, etc. In order to have an adequate diagnosis of regeneration, it is necessary to describe buildings and surroundings by means of documentation and plans. However, at this point in time the foregoing is considerably far removed from the real situation, since more often than not it is extremely difficult to obtain full documentation and cartography, of an acceptable quality, since the material, constructive pathologies and systems are often insufficient or deficient (flat that simply reflects levels, isolated photographs,..). Sometimes the information in reality exists, but this fact is not known, or it is not easily accessible, leading to the unnecessary duplication of efforts and resources. In this paper, we discussed 3D laser scanning technology, which can acquire high density point data in an accurate, fast way. Besides, the scanner can digitize all the 3D information concerned with a real world object such as buildings, trees and terrain down to millimetre detail Therefore, it can provide benefits for refurbishment process in regeneration in the Built Environment and it can be the potential solution to overcome the challenges above. The paper introduce an approach for scanning buildings, processing the point cloud raw data, and a modelling approach for CAD extraction and building objects classification by a pattern matching approach in IFC (Industry Foundation Classes) format. The approach presented in this paper from an undertaken research can lead to parametric design and Building Information Modelling (BIM) for existing structures. Two case studies are introduced to demonstrate the use of laser scanner technology in the Built Environment. These case studies are the Jactin House Building in East Manchester and the Peel building in the campus of University Salford. Through these case studies, while use of laser scanners are explained, the integration of it with various technologies and systems are also explored for professionals in Built Environmen

Sensor enclosures: example application and implications for data coherence

Sensors deployed in natural environments, such as rivers, beaches and glaciers, experience large forces and damaging environmental conditions. Sensors need to be robust, securely operate for extended time periods and be readily relocated and serviced. The sensors must be housed in materials that mimic natural conditions of size, density, shape and roughness. We have developed an encasement system for sensors required to measure large forces experienced by mobile river sediment grains. Sensors are housed within two discrete cases that are rigidly conjoined. The inner case exactly fits the sensor, radio components and power source. This case can be mounted within outer cases of any larger size and can be precisely moulded to match the shapes of natural sediment. Total grain mass can be controlled by packing the outer case with dense material. Case design uses Solid-WorksTM software, and shape-matching involved 3D laser scanning of natural pebbles. The cases were printed using a HP DesignjetTM 3D printer that generates high precision parts that lock rigidly in place. The casings are watertight and robust. Laboratory testing produces accurate results over a wider range of accelerations than previously reported