Doctor of Philosophy

dissertationDNA microarrays have been plagued with analytical problems with quantitation, metrics, figures of merit, and reliability and reproducibility issues, hindering their acceptance in clinical and diagnostic settings. The main deficiency in the printed DNA format is the microspot heterogeneity occurring during array fabrication and further amplified during target hybridization. Work described in this dissertation focuses on assessment of DNA microarray spots generated with conventional pin-type contact printing of fluorescently labeled DNA probes, on industry-standard commercial polymer-coated array slides and their hybridization with complementary oligomer DNA target. Printing of probe DNA microspots shares many features of commonly reported droplet evaporation dynamics that lead to different drying patterns and spot morphologies. This study directly identifies and analyzes different DNA probe chemical and spatial microenvironments within spots, analyzed with high-resolution time-of-flight secondary ion mass spectrometry (TOF-SIMS) chemical imaging, confocal epifluorescence, and probe microscopy force imaging methods. Drying of DNA probe spots shows Marangoni flow effects with high densities of probe DNA-Cy3 located in spot centers and nonhomogeneous DNA distributed radially within printed spots with both TOF-SIMS imaging and epifluorescence microscopy. Target hybridization kinetics and duplex formation were assessed using real-time in situ confocal imaging, and confirmed radial hemispherical diffusion-mediated distribution of target capture from spot edge to its interior. Kinetic modeling indicates pseudo-first order kinetics due to transport limitations and local density-dependent probe interactions with diffusing target. Fluorescence resonance energy transfer (FRET) and photobleaching results show that the high- density probe overcrowding in spots facilitates a broad range of target binding interactions regardless of dye orientations. Moreover, lateral probe density heterogeneity observed with high-resolution imaging techniques confirmed with confocal microscopy produces equally iv heterogeneous target capture under normal assay conditions, showing how spot drying produces signal variability. These methods are the first to interrogate single printed array spots providing new support that microspot signal heterogeneity is not purely a result of target hybridization but is initially sourced during immobilization of probes with droplet printing techniques. This will guide new thinking on immobilized density influence on assay performance and how to approach assay endpoints, either kinetically or at equilibrium binding, by modifying spot molecular environments to reliably capture their signal

Microelectromechanical Systems and Devices

The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators

A Colorimetric investigation of soft proofing

The color proof has become one of the most important tools for quality control in the printing industry today3. Customers, publishers, separators, and printers depend upon its accuracy for indicating the quality of separations. The color proof is the most practical method for communicating how the color should appear and is easy to understand and use for comparison. The analog color proof is compared to the original to determine if the desired result has been achieved. The proof is sent to the customer to indicate how the image will appear when printed. If this proof is accepted, it is sent to the press room to indicate what is expected in the final reproduction. The color proof visually simulates how a set of films will print on the final production press with the production inks and stock. However, all too often, what is seen on the proof is not what the customer receives

Focal Spot, Spring 2007

https://digitalcommons.wustl.edu/focal_spot_archives/1105/thumbnail.jp

Digital imaging technology assessment: Digital document storage project

An ongoing technical assessment and requirements definition project is examining the potential role of digital imaging technology at NASA's STI facility. The focus is on the basic components of imaging technology in today's marketplace as well as the components anticipated in the near future. Presented is a requirement specification for a prototype project, an initial examination of current image processing at the STI facility, and an initial summary of image processing projects at other sites. Operational imaging systems incorporate scanners, optical storage, high resolution monitors, processing nodes, magnetic storage, jukeboxes, specialized boards, optical character recognition gear, pixel addressable printers, communications, and complex software processes

Micro-Biosensor Devices for Biochemical Analysis Applications

A biosensor is an analytical device integrating a biological element and a physicochemical transducer that convert a biological response into a measurable signal. The advantages of biosensors include low cost, small size, quick, sensitivity and selectivity greater than the conventional instruments. Biosensors have a wide range of applications ranging from clinical diagnostics through to environmental monitoring, agriculture industry, et al. The different types of biosensors are classified based on the sensor device as well as the biological material. Biosensors can be broadly classified into (piezoelectric, etc.), electrochemical biosensors (potentiometric, amperometric, etc.), and optical types of biosensors (fiber optics, etc.). Here, we introduce a novel microfluidics-integrated biosensor platform system that can be flexibly adapted to form individual biosensors for different applications. In this dissertation, we present five examples of different emerging areas with this biosensor system including anti-cancer drug screening, glucose monitoring, heavy metal elements measurement, obesity healthcare, and waterborne pathogen DNA detection. These micro-biosensors have great potential to be further developed to emerging portable sensing devices especially for the uses in the developing and undeveloped world. At the last chapter, Raman spectroscopy applied to assess gestational status and the potential for pregnancy complications is presented and discussed. This technique could significantly benefit animal reproduction

Laser-induced forward transfer (LIFT) of water soluble polyvinyl alcohol (PVA) polymers for use as support material for 3D-printed structures

The additive microfabrication method of laser-induced forward transfer (LIFT) permits the creation of functional microstructures with feature sizes down to below a micrometre [1]. Compared to other additive manufacturing techniques, LIFT can be used to deposit a broad range of materials in a contactless fashion. LIFT features the possibility of building out of plane features, but is currently limited to 2D or 2½D structures [2–4]. That is because printing of 3D structures requires sophisticated printing strategies, such as mechanical support structures and post-processing, as the material to be printed is in the liquid phase. Therefore, we propose the use of water-soluble materials as a support (and sacrificial) material, which can be easily removed after printing, by submerging the printed structure in water, without exposing the sample to more aggressive solvents or sintering treatments. Here, we present studies on LIFT printing of polyvinyl alcohol (PVA) polymer thin films via a picosecond pulsed laser source. Glass carriers are coated with a solution of PVA (donor) and brought into proximity to a receiver substrate (glass, silicon) once dried. Focussing of a laser pulse with a beam radius of 2 µm at the interface of carrier and donor leads to the ejection of a small volume of PVA that is being deposited on a receiver substrate. The effect of laser pulse fluence , donor film thickness and receiver material on the morphology (shape and size) of the deposits are studied. Adhesion of the deposits on the receiver is verified via deposition on various receiver materials and via a tape test. The solubility of PVA after laser irradiation is confirmed via dissolution in de-ionised water. In our study, the feasibility of the concept of printing PVA with the help of LIFT is demonstrated. The transfer process maintains the ability of water solubility of the deposits allowing the use as support material in LIFT printing of complex 3D structures. Future studies will investigate the compatibility (i.e. adhesion) of PVA with relevant donor materials, such as metals and functional polymers. References: [1] A. Piqué and P. Serra (2018) Laser Printing of Functional Materials. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA. [2] R. C. Y. Auyeung, H. Kim, A. J. Birnbaum, M. Zalalutdinov, S. A. Mathews, and A. Piqué (2009) Laser decal transfer of freestanding microcantilevers and microbridges, Appl. Phys. A, vol. 97, no. 3, pp. 513–519. [3] C. W. Visser, R. Pohl, C. Sun, G.-W. Römer, B. Huis in ‘t Veld, and D. Lohse (2015) Toward 3D Printing of Pure Metals by Laser-Induced Forward Transfer, Adv. Mater., vol. 27, no. 27, pp. 4087–4092. [4] J. Luo et al. (2017) Printing Functional 3D Microdevices by Laser-Induced Forward Transfer, Small, vol. 13, no. 9, p. 1602553

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community

Handbook of Optical and Laser Scanning

From its initial publication titled Laser Beam Scanning in 1985 to Handbook of Optical and Laser Scanning, now in its second edition, this reference has kept professionals and students at the forefront of optical scanning technology. Carefully and meticulously updated in each iteration, the book continues to be the most comprehensive scanning resource on the market. It examines the breadth and depth of subtopics in the field from a variety of perspectives. The Second Edition covers: Technologies such as piezoelectric devices Applications of laser scanning such as Ladar (laser radar) Underwater scanning and laser scanning in CTP As laser costs come down, and power and availability increase, the potential applications for laser scanning continue to increase. Bringing together the knowledge and experience of 26 authors from England, Japan and the United States, the book provides an excellent resource for understanding the principles of laser scanning. It illustrates the significance of scanning in society today and would help the user get started in developing system concepts using scanning. It can be used as an introduction to the field and as a reference for persons involved in any aspect of optical and laser beam scanning