609 research outputs found
Joint Routing and STDMA-based Scheduling to Minimize Delays in Grid Wireless Sensor Networks
In this report, we study the issue of delay optimization and energy
efficiency in grid wireless sensor networks (WSNs). We focus on STDMA (Spatial
Reuse TDMA)) scheduling, where a predefined cycle is repeated, and where each
node has fixed transmission opportunities during specific slots (defined by
colors). We assume a STDMA algorithm that takes advantage of the regularity of
grid topology to also provide a spatially periodic coloring ("tiling" of the
same color pattern). In this setting, the key challenges are: 1) minimizing the
average routing delay by ordering the slots in the cycle 2) being energy
efficient. Our work follows two directions: first, the baseline performance is
evaluated when nothing specific is done and the colors are randomly ordered in
the STDMA cycle. Then, we propose a solution, ORCHID that deliberately
constructs an efficient STDMA schedule. It proceeds in two steps. In the first
step, ORCHID starts form a colored grid and builds a hierarchical routing based
on these colors. In the second step, ORCHID builds a color ordering, by
considering jointly both routing and scheduling so as to ensure that any node
will reach a sink in a single STDMA cycle. We study the performance of these
solutions by means of simulations and modeling. Results show the excellent
performance of ORCHID in terms of delays and energy compared to a shortest path
routing that uses the delay as a heuristic. We also present the adaptation of
ORCHID to general networks under the SINR interference model
Optimal Multi-TDMA Scheduling in Ring Topology Networks
A scheduling algorithm will be proposed for wireless ring topology networks, utilizing time division multiple access (TDMA) with possible simultaneous operation of nodes. The proposed algorithm finds the optimal schedule to minimize the turnaround time for messages in the network. The properties of the algorithm are mathematically analyzed and proven, and practical test results are also provided
TRASA: TRaffic Aware Slot Assignment Algorithm in Wireless Sensor Networks
International audienceIn data gathering applications which is a typical application paradigm in wireless sensor networks, sensor nodes may have different traffic demands. Assigning equal channel access to each node may lead to congestion, inefficient use of the bandwidth and decrease of the application performance. In this paper, we prove that the time slot assignment problem is NP-complete when p-hop nodes are not assigned the same slot, with 1 <= p <= h for any strictly positive integer h. We propose TRASA, a TRaffic Aware time Slot Assignment algorithm able to allocate slots to sensors proportionally to their demand. We evaluate the performance of TRASA for different heuristics and prove that it provides an optimized spatial reuse and a minimized cycle length
Energy-delay region of low duty cycle wireless sensor networks for critical data collection
Session: Sensor networksThe Conference program's website is located at http://ita.ucsd.edu/workshop/14/talksWe investigate the trade-off between energy consumption and delay for critical data collection in low duty cycle wireless sensor networks, where a causality constraint exists for routing and link scheduling. We characterize the energy-delay region (E-D region) and formulate a combinatorial optimization problem to determine the link scheduling with the causality constraint. A new multiple-degree ordered (MDO) coloring method is proposed to solve this problem with near-optimal delay performance. The impacts of many system parameters on the ED region are evaluated by extensive simulation, providing an insightful frame of reference for design of critical data collection wireless sensor networks.postprin
Cross-layer design for network performance optimization in wireless networks
In this dissertation, I use mathematical optimization approach to solve the complex network problems. Paper l and paper 2 first show that ignoring the bandwidth constraint can lead to infeasible routing solutions. A sufficient condition on link bandwidth is proposed that makes a routing solution feasible, and then a mathematical optimization model based on this sufficient condition is provided. Simulation results show that joint optimization models can provide more feasible routing solutions and provide significant improvement on throughput and lifetime. In paper 3 and paper 4, an interference model is proposed and a transmission scheduling scheme is presented to minimize the end-to-end delay. This scheduling scheme is designed based on integer linear programming and involves interference modeling. Using this schedule, there are no conflicting transmissions at any time. Through simulation, it shows that the proposed link scheduling scheme can significantly reduce end-to-end latency. Since to compute the maximum throughput is an NP-hard problem, efficient heuristics are presented in Paper 5 that use sufficient conditions instead of the computationally-expensive-to-get optimal condition to capture the mutual conflict relation in a collision domain. Both one-way transmission and two-way transmission are considered. Simulation results show that the proposed algorithms improve network throughput and reduce energy consumption, with significant improvement over previous work on both aspects. Paper 6 studies the complicated tradeoff relation among multiple factors that affect the sensor network lifetime and proposes an adaptive multi-hop clustering algorithm. It realizes the best tradeoff among multiple factors and outperforms others that do not. It is adaptive in the sense the clustering topology changes over time in order to have the maximum lifetime --Abstract, page iv
A survey on energy efficient techniques in wireless sensor networks
International audienceThe myriad of potential applications supported by wireless sensor networks (WSNs) has generated much interest from the research community. Various applications range from small size low industrial monitoring to large scale energy constrained environmental monitoring. In all cases, an operational network is required to fulfill the application missions. In addition, energy consumption of nodes is a great challenge in order to maximize network lifetime. Unlike other networks, it can be hazardous, very expensive or even impossible to charge or replace exhausted batteries due to the hostile nature of environment. Researchers are invited to design energy efficient protocols while achieving the desired network operations. This paper focuses on different techniques to reduce the consumption of the limited energy budget of sensor nodes. After having identified the reasons of energy waste in WSNs, we classify energy efficient techniques into five classes, namely data reduction, control reduction, energy efficient routing, duty cycling and topology control. We then detail each of them, presenting subdivisions and giving many examples. We conclude by a recapitulative table
Interference-Aware Scheduling for Connectivity in MIMO Ad Hoc Multicast Networks
We consider a multicast scenario involving an ad hoc network of co-channel
MIMO nodes in which a source node attempts to share a streaming message with
all nodes in the network via some pre-defined multi-hop routing tree. The
message is assumed to be broken down into packets, and the transmission is
conducted over multiple frames. Each frame is divided into time slots, and each
link in the routing tree is assigned one time slot in which to transmit its
current packet. We present an algorithm for determining the number of time
slots and the scheduling of the links in these time slots in order to optimize
the connectivity of the network, which we define to be the probability that all
links can achieve the required throughput. In addition to time multiplexing,
the MIMO nodes also employ beamforming to manage interference when links are
simultaneously active, and the beamformers are designed with the maximum
connectivity metric in mind. The effects of outdated channel state information
(CSI) are taken into account in both the scheduling and the beamforming
designs. We also derive bounds on the network connectivity and sum transmit
power in order to illustrate the impact of interference on network performance.
Our simulation results demonstrate that the choice of the number of time slots
is critical in optimizing network performance, and illustrate the significant
advantage provided by multiple antennas in improving network connectivity.Comment: 34 pages, 12 figures, accepted by IEEE Transactions on Vehicular
Technology, Dec. 201
Towards Optimal Distributed Node Scheduling in a Multihop Wireless Network through Local Voting
In a multihop wireless network, it is crucial but challenging to schedule
transmissions in an efficient and fair manner. In this paper, a novel
distributed node scheduling algorithm, called Local Voting, is proposed. This
algorithm tries to semi-equalize the load (defined as the ratio of the queue
length over the number of allocated slots) through slot reallocation based on
local information exchange. The algorithm stems from the finding that the
shortest delivery time or delay is obtained when the load is semi-equalized
throughout the network. In addition, we prove that, with Local Voting, the
network system converges asymptotically towards the optimal scheduling.
Moreover, through extensive simulations, the performance of Local Voting is
further investigated in comparison with several representative scheduling
algorithms from the literature. Simulation results show that the proposed
algorithm achieves better performance than the other distributed algorithms in
terms of average delay, maximum delay, and fairness. Despite being distributed,
the performance of Local Voting is also found to be very close to a centralized
algorithm that is deemed to have the optimal performance
Fundamentals of Large Sensor Networks: Connectivity, Capacity, Clocks and Computation
Sensor networks potentially feature large numbers of nodes that can sense
their environment over time, communicate with each other over a wireless
network, and process information. They differ from data networks in that the
network as a whole may be designed for a specific application. We study the
theoretical foundations of such large scale sensor networks, addressing four
fundamental issues- connectivity, capacity, clocks and function computation.
To begin with, a sensor network must be connected so that information can
indeed be exchanged between nodes. The connectivity graph of an ad-hoc network
is modeled as a random graph and the critical range for asymptotic connectivity
is determined, as well as the critical number of neighbors that a node needs to
connect to. Next, given connectivity, we address the issue of how much data can
be transported over the sensor network. We present fundamental bounds on
capacity under several models, as well as architectural implications for how
wireless communication should be organized.
Temporal information is important both for the applications of sensor
networks as well as their operation.We present fundamental bounds on the
synchronizability of clocks in networks, and also present and analyze
algorithms for clock synchronization. Finally we turn to the issue of gathering
relevant information, that sensor networks are designed to do. One needs to
study optimal strategies for in-network aggregation of data, in order to
reliably compute a composite function of sensor measurements, as well as the
complexity of doing so. We address the issue of how such computation can be
performed efficiently in a sensor network and the algorithms for doing so, for
some classes of functions.Comment: 10 pages, 3 figures, Submitted to the Proceedings of the IEE
Energy efficient clustering using the AMHC (adoptive multi-hop clustering) technique
IoT has gained fine attention in several field such as in industry applications, agriculture, monitoring, surveillance, similarly parallel growth has been observed in field of WSN. WSN is one of the primary component of IoT when it comes to sensing the data in various environment. Clustering is one of the basic approach in order to obtain the measurable performance in WSNs, Several algorithms of clustering aims to obtain the efficient data collection, data gathering and the routing. In this paper, a novel AMHC (Adaptive Multi-Hop Clustering) algorithm is proposed for the homogenous model, the main aim of algorithm is to obtain the higher efficiency and make it energy efficient. Our algorithm mainly contains the three stages: namely assembling, coupling and discarding. First stage involves the assembling of independent sets (maximum), second stage involves the coupling of independent sets and at last stage the superfluous nodes are discarded. Discarding superfluous nodes helps in achieving higher efficiency. Since our algorithm is a coloring algorithm, different color are used at the different stages for coloring the nodes. Afterwards our algorithm (AMHC) is compared with the existing system which is a combination of Second order data CC(Coupled Clustering) and Compressive-Projection PCA(Principal Component Analysis), and results shows that our algorithm excels in terms of several parameters such as energy efficiency, network lifetime, number of rounds performed
- …