Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Reliability performance analysis of half-duplex and full-duplex schemes with self-energy recycling

Abstract. Radio frequency energy harvesting (EH) has emerged as a promising option for improving the energy efficiency of current and future networks. Self-energy recycling (sER), as a variant of EH, has also appeared as a suitable alternative that allows to reuse part of the transmitted energy via an energy loop. In this work we study the benefits of using sER in terms of reliability improvements and compare the performance of full-duplex (FD) and half-duplex (HD) schemes when using multi-antenna techniques at the base station side. We also assume a model for the hardware energy consumption, making the analysis more realistic since most works only consider the energy spent on transmission. In addition to spectral efficiency enhancements, results show that FD performs better than HD in terms of reliability. We maximize the outage probability of the worst link in the network using a dynamic FD scheme where a small base station (SBS) determines the optimal number of antennas for transmission and reception. This scheme proves to be more efficient than classical HD and FD modes. Results show that the use of sER at the SBS introduces changes on the distribution of antennas for maximum fairness when compared to the setup without sER. Moreover, we determine the minimum number of active radio frequency chains required at the SBS in order to achieve a given reliability target

Optimized Visual Internet of Things in Video Processing for Video Streaming

The global expansion of the Visual Internet of Things (VIoT) has enabled various new applications during the last decade through the interconnection of a wide range of devices and sensors.Frame freezing and buffering are the major artefacts in broad area of multimedia networking applications occurring due to significant packet loss and network congestion. Numerous studies have been carried out in order to understand the impact of packet loss on QoE for a wide range of applications. This paper improves the video streaming quality by using the proposed framework Lossy Video Transmission (LVT)  for simulating the effect of network congestion on the performance of  encrypted static images sent over wireless sensor networks.The simulations are intended for analysing video quality and determining packet drop resilience during video conversations.The assessment of emerging trends in quality measurement, including picture preference, visual attention, and audio visual quality is checked. To appropriately quantify the video quality loss caused by the encoding system, various encoders compress video sequences at various data rates.Simulation results for different QoE metrics with respect to user developed videos have been demonstrated which outperforms the existing metrics

Synchronization in wireless communications

The last decade has witnessed an immense increase of wireless communications services in order to keep pace with the ever increasing demand for higher data rates combined with higher mobility. To satisfy this demand for higher data rates, the throughput over the existing transmission media had to be increased. Several techniques were proposed to boost up the data rate: multicarrier systems to combat selective fading, ultra wide band (UWB) communications systems to share the spectrum with other users, MIMO transmissions to increase the capacity of wireless links, iteratively decodable codes (e.g., turbo codes and LDPC codes) to improve the quality of the link, cognitive radios, and so forth

Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers

Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement

Optical Synchronization of Time-of-Flight Cameras

Time-of-Flight (ToF)-Kameras erzeugen Tiefenbilder (3D-Bilder), indem sie Infrarotlicht aussenden und die Zeit messen, bis die Reflexion des Lichtes wieder empfangen wird. Durch den Einsatz mehrerer ToF-Kameras können ihre vergleichsweise geringere Auflösungen überwunden, das Sichtfeld vergrößert und Verdeckungen reduziert werden. Der gleichzeitige Betrieb birgt jedoch die Möglichkeit von Störungen, die zu fehlerhaften Tiefenmessungen führen. Das Problem der gegenseitigen Störungen tritt nicht nur bei Mehrkamerasystemen auf, sondern auch wenn mehrere unabhängige ToF-Kameras eingesetzt werden. In dieser Arbeit wird eine neue optische Synchronisation vorgestellt, die keine zusätzliche Hardware oder Infrastruktur erfordert, um ein Zeitmultiplexverfahren (engl. Time-Division Multiple Access, TDMA) für die Anwendung mit ToF-Kameras zu nutzen, um so die Störungen zu vermeiden. Dies ermöglicht es einer Kamera, den Aufnahmeprozess anderer ToF-Kameras zu erkennen und ihre Aufnahmezeiten schnell zu synchronisieren, um störungsfrei zu arbeiten. Anstatt Kabel zur Synchronisation zu benötigen, wird nur die vorhandene Hardware genutzt, um eine optische Synchronisation zu erreichen. Dazu wird die Firmware der Kamera um das Synchronisationsverfahren erweitert. Die optische Synchronisation wurde konzipiert, implementiert und in einem Versuchsaufbau mit drei ToF-Kameras verifiziert. Die Messungen zeigen die Wirksamkeit der vorgeschlagenen optischen Synchronisation. Während der Experimente wurde die Bildrate durch das zusätzliche Synchronisationsverfahren lediglich um etwa 1 Prozent reduziert.Time-of-Flight (ToF) cameras produce depth images (three-dimensional images) by measuring the time between the emission of infrared light and the reception of its reflection. A setup of multiple ToF cameras may be used to overcome their comparatively low resolution, increase the field of view, and reduce occlusion. However, the simultaneous operation of multiple ToF cameras introduces the possibility of interference resulting in erroneous depth measurements. The problem of interference is not only related to a collaborative multicamera setup but also to multiple ToF cameras operating independently. In this work, a new optical synchronization for ToF cameras is presented, requiring no additional hardware or infrastructure to utilize a time-division multiple access (TDMA) scheme to mitigate interference. It effectively enables a camera to sense the acquisition process of other ToF cameras and rapidly synchronizes its acquisition times to operate without interference. Instead of requiring cables to synchronize, only the existing hardware is utilized to enable an optical synchronization. To achieve this, the camera’s firmware is extended with the synchronization procedure. The optical synchronization has been conceptualized, implemented, and verified with an experimental setup deploying three ToF cameras. The measurements show the efficacy of the proposed optical synchronization. During the experiments, the frame rate was reduced by only about 1% due to the synchronization procedure