459 research outputs found
Degrees of Freedom of Uplink-Downlink Multiantenna Cellular Networks
An uplink-downlink two-cell cellular network is studied in which the first
base station (BS) with antennas receives independent messages from its
serving users, while the second BS with antennas transmits
independent messages to its serving users. That is, the first and second
cells operate as uplink and downlink, respectively. Each user is assumed to
have a single antenna. Under this uplink-downlink setting, the sum degrees of
freedom (DoF) is completely characterized as the minimum of
,
, , and , where denotes
. The result demonstrates that, for a broad class of network
configurations, operating one of the two cells as uplink and the other cell as
downlink can strictly improve the sum DoF compared to the conventional uplink
or downlink operation, in which both cells operate as either uplink or
downlink. The DoF gain from such uplink-downlink operation is further shown to
be achievable for heterogeneous cellular networks having hotspots and with
delayed channel state information.Comment: 22 pages, 11 figures, in revision for IEEE Transactions on
Information Theor
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Real-World Evaluation of Full-Duplex Millimeter Wave Communication Systems
Noteworthy strides continue to be made in the development of full-duplex
millimeter wave (mmWave) communication systems, but most of this progress has
been built on theoretical models and validated through simulation. In this
work, we conduct a long overdue real-world evaluation of full-duplex mmWave
systems using off-the-shelf 60 GHz phased arrays. Using an experimental
full-duplex base station, we collect over 200,000 measurements of
self-interference by electronically sweeping its transmit and receive beams
across a dense spatial profile, shedding light on the effects of the
environment, array positioning, and beam steering direction. We then call
attention to five key challenges faced by practical full-duplex mmWave systems
and, with these in mind, propose a general framework for beamforming-based
full-duplex solutions. Guided by this framework, we introduce a novel solution
called STEER+, a more robust version of recent work called STEER, and
experimentally evaluate both in a real-world setting with actual downlink and
uplink users. Rather than purely minimize self-interference as with STEER,
STEER+ makes use of additional measurements to maximize spectral efficiency,
which proves to make it much less sensitive to one's choice of design
parameters. We experimentally show that STEER+ can reliably reduce
self-interference to near or below the noise floor while maintaining high SNR
on the downlink and uplink, thus enabling full-duplex operation purely via
beamforming.Comment: This paper has been submitted to the IEEE for review and possible
publication; copyright may change without notic
Achieving "Massive MIMO" Spectral Efficiency with a Not-so-Large Number of Antennas
The main focus and contribution of this paper is a novel network-MIMO TDD
architecture that achieves spectral efficiencies comparable with "Massive
MIMO", with one order of magnitude fewer antennas per active user per cell. The
proposed architecture is based on a family of network-MIMO schemes defined by
small clusters of cooperating base stations, zero-forcing multiuser MIMO
precoding with suitable inter-cluster interference constraints, uplink pilot
signals reuse across cells, and frequency reuse. The key idea consists of
partitioning the users population into geographically determined "bins", such
that all users in the same bin are statistically equivalent, and use the
optimal network-MIMO architecture in the family for each bin. A scheduler takes
care of serving the different bins on the time-frequency slots, in order to
maximize a desired network utility function that captures some desired notion
of fairness. This results in a mixed-mode network-MIMO architecture, where
different schemes, each of which is optimized for the served user bin, are
multiplexed in time-frequency. In order to carry out the performance analysis
and the optimization of the proposed architecture in a clean and
computationally efficient way, we consider the large-system regime where the
number of users, the number of antennas, and the channel coherence block length
go to infinity with fixed ratios. The performance predicted by the large-system
asymptotic analysis matches very well the finite-dimensional simulations.
Overall, the system spectral efficiency obtained by the proposed architecture
is similar to that achieved by "Massive MIMO", with a 10-fold reduction in the
number of antennas at the base stations (roughly, from 500 to 50 antennas).Comment: Full version with appendice (proofs of theorems). A shortened version
without appendice was submitted to IEEE Trans. on Wireless Commun. Appendix B
was revised after submissio
- …