Scalable and perceptual audio compression

This thesis deals with scalable perceptual audio compression. Two scalable perceptual solutions as well as a scalable to lossless solution are proposed and investigated. One of the scalable perceptual solutions is built around sinusoidal modelling of the audio signal whilst the other is built on a transform coding paradigm. The scalable coders are shown to scale both in a waveform matching manner as well as a psychoacoustic manner. In order to measure the psychoacoustic scalability of the systems investigated in this thesis, the similarity between the original signal\u27s psychoacoustic parameters and that of the synthesized signal are compared. The psychoacoustic parameters used are loudness, sharpness, tonahty and roughness. This analysis technique is a novel method used in this thesis and it allows an insight into the perceptual distortion that has been introduced by any coder analyzed in this manner

Frequency-warped autoregressive modeling and filtering

This thesis consists of an introduction and nine articles. The articles are related to the application of frequency-warping techniques to audio signal processing, and in particular, predictive coding of wideband audio signals. The introduction reviews the literature and summarizes the results of the articles. Frequency-warping, or simply warping techniques are based on a modification of a conventional signal processing system so that the inherent frequency representation in the system is changed. It is demonstrated that this may be done for basically all traditional signal processing algorithms. In audio applications it is beneficial to modify the system so that the new frequency representation is close to that of human hearing. One of the articles is a tutorial paper on the use of warping techniques in audio applications. Majority of the articles studies warped linear prediction, WLP, and its use in wideband audio coding. It is proposed that warped linear prediction would be particularly attractive method for low-delay wideband audio coding. Warping techniques are also applied to various modifications of classical linear predictive coding techniques. This was made possible partly by the introduction of a class of new implementation techniques for recursive filters in one of the articles. The proposed implementation algorithm for recursive filters having delay-free loops is a generic technique. This inspired to write an article which introduces a generalized warped linear predictive coding scheme. One example of the generalized approach is a linear predictive algorithm using almost logarithmic frequency representation.reviewe

On Predictive Coding for Erasure Channels Using a Kalman Framework

We present a new design method for robust low-delay coding of autoregressive (AR) sources for transmission across erasure channels. It is a fundamental rethinking of existing concepts. It considers the encoder a mechanism that produces signal measurements from which the decoder estimates the original signal. The method is based on linear predictive coding and Kalman estimation at the decoder. We employ a novel encoder state-space representation with a linear quantization noise model. The encoder is represented by the Kalman measurement at the decoder. The presented method designs the encoder and decoder offline through an iterative algorithm based on closed-form minimization of the trace of the decoder state error covariance. The design method is shown to provide considerable performance gains, when the transmitted quantized prediction errors are subject to loss, in terms of signal-to-noise ratio (SNR) compared to the same coding framework optimized for no loss. The design method applies to stationary auto-regressive sources of any order. We demonstrate the method in a framework based on a generalized differential pulse code modulation (DPCM) encoder. The presented principles can be applied to more complicated coding systems that incorporate predictive coding as well

The development of speech coding and the first standard coder for public mobile telephony

This thesis describes in its core chapter (Chapter 4) the original algorithmic and design features of the ??rst coder for public mobile telephony, the GSM full-rate speech coder, as standardized in 1988. It has never been described in so much detail as presented here. The coder is put in a historical perspective by two preceding chapters on the history of speech production models and the development of speech coding techniques until the mid 1980s, respectively. In the epilogue a brief review is given of later developments in speech coding. The introductory Chapter 1 starts with some preliminaries. It is de- ??ned what speech coding is and the reader is introduced to speech coding standards and the standardization institutes which set them. Then, the attributes of a speech coder playing a role in standardization are explained. Subsequently, several applications of speech coders - including mobile telephony - will be discussed and the state of the art in speech coding will be illustrated on the basis of some worldwide recognized standards. Chapter 2 starts with a summary of the features of speech signals and their source, the human speech organ. Then, historical models of speech production which form the basis of di??erent kinds of modern speech coders are discussed. Starting with a review of ancient mechanical models, we will arrive at the electrical source-??lter model of the 1930s. Subsequently, the acoustic-tube models as they arose in the 1950s and 1960s are discussed. Finally the 1970s are reviewed which brought the discrete-time ??lter model on the basis of linear prediction. In a unique way the logical sequencing of these models is exposed, and the links are discussed. Whereas the historical models are discussed in a narrative style, the acoustic tube models and the linear prediction tech nique as applied to speech, are subject to more mathematical analysis in order to create a sound basis for the treatise of Chapter 4. This trend continues in Chapter 3, whenever instrumental in completing that basis. In Chapter 3 the reader is taken by the hand on a guided tour through time during which successive speech coding methods pass in review. In an original way special attention is paid to the evolutionary aspect. Speci??cally, for each newly proposed method it is discussed what it added to the known techniques of the time. After presenting the relevant predecessors starting with Pulse Code Modulation (PCM) and the early vocoders of the 1930s, we will arrive at Residual-Excited Linear Predictive (RELP) coders, Analysis-by-Synthesis systems and Regular- Pulse Excitation in 1984. The latter forms the basis of the GSM full-rate coder. In Chapter 4, which constitutes the core of this thesis, explicit forms of Multi-Pulse Excited (MPE) and Regular-Pulse Excited (RPE) analysis-by-synthesis coding systems are developed. Starting from current pulse-amplitude computation methods in 1984, which included solving sets of equations (typically of order 10-16) two hundred times a second, several explicit-form designs are considered by which solving sets of equations in real time is avoided. Then, the design of a speci??c explicitform RPE coder and an associated eÆcient architecture are described. The explicit forms and the resulting architectural features have never been published in so much detail as presented here. Implementation of such a codec enabled real-time operation on a state-of-the-art singlechip digital signal processor of the time. This coder, at a bit rate of 13 kbit/s, has been selected as the Full-Rate GSM standard in 1988. Its performance is recapitulated. Chapter 5 is an epilogue brie y reviewing the major developments in speech coding technology after 1988. Many speech coding standards have been set, for mobile telephony as well as for other applications, since then. The chapter is concluded by an outlook

Optimisation techniques for low bit rate speech coding

This thesis extends the background theory of speech and major speech coding schemes used in existing networks to an implementation of GSM full-rate speech compression on a RISC DSP and a multirate application for speech coding. Speech coding is the field concerned with obtaining compact digital representations of speech signals for the purpose of efficient transmission. In this thesis, the background of speech compression, characteristics of speech signals and the DSP algorithms used have been examined. The current speech coding schemes and requirements have been studied. The Global System for Mobile communication (GSM) is a digital mobile radio system which is extensively used throughout Europe, and also in many other parts of the world. The algorithm is standardised by the European Telecommunications Standardisation histitute (ETSI). The full-rate and half-rate speech compression of GSM have been analysed. A real time implementation of the full-rate algorithm has been carried out on a RISC processor GEPARD by Austria Mikro Systeme International (AMS). The GEPARD code has been tested with all of the test sequences provided by ETSI and the results are bit-exact. The transcoding delay is lower than the ETSI requirement. A comparison of the half-rate and full-rate compression algorithms is discussed. Both algorithms offer near toll speech quality comparable or better than analogue cellular networks. The half-rate compression requires more computationally intensive operations and therefore a more powerful processor will be needed due to the complexity of the code. Hence the cost of the implementation of half-rate codec will be considerably higher than full-rate. A description of multirate signal processing and its application on speech (SBC) and speech/audio (MPEG) has been given. An investigation into the possibility of combining multirate filtering and GSM fill-rate speech algorithm. The results showed that multirate signal processing cannot be directly applied GSM full-rate speech compression since this method requires more processing power, causing longer coding delay but did not appreciably improve the bit rate. In order to achieve a lower bit rate, the GSM full-rate mathematical algorithm can be used instead of the standardised ETSI recommendation. Some changes including the number of quantisation bits has to be made before the application of multirate signal processing and a new standard will be required

New linear predictive methods for digital speech processing

Speech processing is needed whenever speech is to be compressed, synthesised or recognised by the means of electrical equipment. Different types of phones, multimedia equipment and interfaces to various electronic devices, all require digital speech processing. As an example, a GSM phone applies speech processing in its RPE-LTP encoder/decoder (ETSI, 1997). In this coder, 20 ms of speech is first analysed in the short-term prediction (STP) part, and second in the long-term prediction (LTP) part. Finally, speech compression is achieved in the RPE encoding part, where only 1/3 of the encoded samples are selected to be transmitted. This thesis presents modifications for one of the most widely applied techniques in digital speech processing, namely linear prediction (LP). During recent decades linear prediction has played an important role in telecommunications and other areas related to speech compression and recognition. In linear prediction sample s(n) is predicted from its p previous samples by forming a linear combination of the p previous samples and by minimising the prediction error. This procedure in the time domain corresponds to modelling the spectral envelope of the speech spectrum in the frequency domain. The accuracy of the spectral envelope to the speech spectrum is strongly dependent on the order of the resulting all-pole filter. This, in turn, is usually related to the number of parameters required to define the model, and hence to be transmitted. Our study presents new predictive methods, which are modified from conventional linear prediction by taking the previous samples for linear combination differently. This algorithmic development aims at new all-pole techniques, which could present speech spectra with fewer parameters.reviewe