Dual-linearly polarized, electrically small, low-profile, broadside radiating, huygens dipole antenna

© 1963-2012 IEEE. A dual-linearly polarized, electrically small, low-profile, broadside radiating Huygens dipole antenna is presented, that is, an advanced combination of electric and magnetic near-field resonant parasitic elements. Its prototype was fabricated and tested. The measured results are in good agreement with their simulated values. At 1.515 GHz, the prototype is electrically small ( ka = 0.904 ) and low profile ( 0.0483\lambda -{0} ). It exhibits high port isolation and a large front-to-back ratio (FTBR). The isolation between its two ports is demonstrated to be over 25.8 dB within its -10 dB fractional impedance bandwidth, 0.46%. When port 1 (port 2) is excited, the peak realized gain is 2.03 dBi (2.15 dBi) strictly along the broadside direction with a 12.4 dB (12.1 dB) FTBR

A comprehensive survey on 'circular polarized antennas' for existing and emerging wireless communication technologies

Circular polarized (CP) antennas are well suited for long-distance transmission attainment. In order to be adaptable for beyond 5G communication, a detailed and systematic investigation of their important conventional features is required for expected enhancements. The existing designs employing millimeter wave, microwave, and ultra-wideband (UWB) frequencies form the elementary platform for future studies. The 3.4-3.8 GHz frequency band has been identified as a worthy candidate for 5G communications because of spectrum availability. This band comes under UWB frequencies (3.1-10.6 GHz). In this survey, a review of CP antennas in the selected areas to improve the understanding of early-stage researchers specially experienced antenna designers has presented for the first time as best of our knowledge. Design implementations involving size, axial ratio, efficiency, and gain improvements are covered in detail. Besides that, various design approaches to realize CP antennas including (a) printed CP antennas based on parasitic or slotted elements, (b) dielectric resonator CP antennas, (c) reconfigurable CP antennas, (d) substrate integrated waveguide CP antennas, (e) fractal CP antennas, (f) hybrid techniques CP antennas, and (g) 3D printing CP antennas with single and multiple feeding structures have investigated and analyzed. The aim of this work is to provide necessary guidance for the selection of CP antenna geometries in terms of the required dimensions, available bandwidth, gain, and useful materials for the integration and realization in future communication systems

Advanced Circularly Polarised Microstrip Patch Antennas

The thesis describes outcomes of research on advanced circularly polarised antennas. The proposed designs are intended for integration into small mobile devices, therefore low profile and easy manufacturability are key parameters, along with good CP radiation properties. The designs were validated by simulation and measurement, and are also backed by theory and design guidelines. The primary focus is on the development of planar omnidirectional circularly polarised antennas, which are fabricated using multilayer PCB techniques and thus are lightweight and cost-efficient. Unlike in classical microstrip patch antenna designs, the groundplane of the proposed antenna was substantially reduced. This helps to achieve an omnidirectional circular polarisation pattern and miniaturize the antenna, however at the cost of increased feed circuit complexity. The basic design, its advantages and disadvantages are discussed in Section 3. In the next step, the omnidirectional circularly polarised antenna was extended with additional, advanced features. A miniaturized version is investigated, which offers a 20% footprint reduction by folding parts of the patch underneath itself. Further miniaturization is possible by increasing the dielectric constant of the substrate. A method to adjust the omnidirectional circularly polarised antenna performance by trimming four lumped capacitors is also investigated. Manufacturing inaccuracy in large scale production may cause some of the units to radiate outside of the desired frequencies. By integrating four trimmed capacitors into the antenna it can be precisely tuned to the desired band. Simulated results demonstrate this property by trimming the antenna between GPS L1 band (centre frequency at 1.575 GHz) and Galileo/Beidou-2 E2 band (1.561 GHz). Furthermore, a dual-band omnidirectional circularly polarised antenna is presented, which employs slots and capacitor loading to steer the current path of the first and second resonant mode. The design offers a small frequency ratio of 1.182. The methods to obtain a planar omnidirectional circularly polarised antenna have been further advanced to propose a reconfigurable antenna. The beam reconfiguration is capable of rotating it dipole-like radiation pattern around an axis, thus allowing reception or transmission from any spherical angle. The switching method is simple and does not require any semiconductor devices. Finally, a dual circularly polarised antenna is presented, which achieves dual-polarisation by employing even and odd modes in a coplanar waveguide. This technique allows greater flexibility and size reduction of the feed network, as two signals can be transmitted by a single multi-mode transmission line. Simulated results demonstrate this property by trimming the antenna between GPS L1 band (centre frequency at 1.575 GHz) and Galileo/Beidou-2 E2 band (1.561 GHz). Furthermore, a dual-band omnidirectional circularly polarised antenna is presented, which employs slots and capacitor loading to steer the current path of the first and second resonant mode. The design offers a small frequency ratio of 1.182. The methods to obtain a planar omnidirectional circularly polarised antenna have been further advanced to propose a reconfigurable antenna. The beam reconfiguration is capable of rotating it dipole-like radiation pattern around an axis, thus allowing reception or transmission from any spherical angle. The switching method is simple and does not require any semiconductor devices. Finally, a dual circularly polarised antenna is presented, which achieves dual-polarisation by employing even and odd modes in a coplanar waveguide. This technique allows greater flexibility and size reduction of the feed network, as two signals can be transmitted by a single multi-mode transmission line

Analysis of Miniaturized, Circularly Polarized Antennas for Bidirectional Propagation

Size reduction is necessary to fit the recent demand for small sized communication systems in consumer electronics. Wireless communication systems rely on antennas for long range transmission of signals, so size reduced antennas have been sought after in recent years. Also, not many antennas are designed for use in bidirectional scenarios like subways, tunnels, bridges, etc. Three sized reduced antennas with circular polarization are presented for use in bidirectional communication systems. An electrically small pattern reconfigurable array, an electrically small two-sided printed cross dipole, and a size reduced printed wideband antenna are introduced within this thesis. All antennas’ results are obtained from simulation, with two of the antenna designs being measured to verify their results

A Wideband Series-Fed Circularly Polarized Differential Antenna by Using Crossed Open Slot-Pairs

A novel method of designing a wideband series-fed circularly polarized (CP) differential antenna by using crossed open slot-pairs is presented in this paper. The near-field distributions and input impedance analyses show that the closely spaced open slot-pairs can radiate as the crossed dipoles and have stable radiating resistance with a compact radiator size. Besides, a wideband half-power phase shifter by using open slot is proposed and utilized to realize CP radiation. The proposed CP antenna is composed of a wide slot-pair and a narrow slot-pair. In the antenna design, the narrow slot-pair is not only excited as a radiator, but also elaborately loaded to provide wideband half-power output and quadrature phase excitation to the wide slot-pair. Both the proposed half-power phase shifter and CP antenna are illustrated by the corresponding equivalent circuits. Based on these analyses, the proposed antenna is designed, fabricated and measured. Compared to the simulated traditionally designed counterpart, 2.1 times wider axial ratio bandwidth is achieved for the proposed antenna. The measured overlapped bandwidth for axial ratio 10 dB is 1.95-3.45 GHz (55.6%). Also, the antenna gain and radiation patterns are measured, which agree well with the simulated results

Electrically Small, Low-Profile, Huygens Circularly Polarized Antenna

© 1963-2012 IEEE. The design, simulation studies, and experimental verification of an electrically small, low-profile, broadside-radiating Huygens circularly polarized (HCP) antenna are reported. To realize its unique circular polarization cardioid-shaped radiation characteristics in a compact structure, two pairs of the metamaterial-inspired near-field resonant parasitic elements, the Egyptian axe dipole (EAD) and the capacitively loaded loop (CLL), are integrated into a crossed-dipole configuration. The EAD (CLL) elements act as the orthogonal electric dipole (magnetic dipole) radiators. Balanced broadside-radiated electric and magnetic field amplitudes with the requisite 90° phase difference between them are realized by exciting these two pairs of electric and magnetic dipoles with a specially designed, unbalanced crossed-dipole structure. The electrically small (ka = 0.73) design operates at 1575 MHz. It is low profile 0.04λ0, and its entire volume is only 0.0018λ03. A prototype of this optimized HCP antenna system was fabricated, assembled, and tested. The measured results are in good agreement with their simulated values. They demonstrate that the prototype HCP antenna resonates at 1584 MHz with a 0.6 dB axial ratio, and produces the predicted Huygens cardioid-shaped radiation patterns. The measured peak realized LHCP gain was 2.7 dBic, and the associated front-to-back ratio was 17.7 dB

Reconfigurable Wideband Circularly Polarized Microstrip Patch Antenna for Wireless Applications

In this thesis, developments of rectangular microstrip patch antenna to have circular polarization agility with wideband performance, for wireless applications are presented. First, a new technique to achieve circularly polarized (CP) probe feed single-layer microstrip patch antenna with wideband characteristics is proposed. The antenna is a modified form of the popular E-shaped patch, used to broaden the impedance bandwidth of a basic rectangular patch antenna. This is established by letting the two parallel slots of the E-patch unequal. Thus, by introducing asymmetry two orthogonal currents on the patch are excited and circularly polarized fields are realized. The proposed technique exhibits the advantage of the simplicity inherent in the E-shaped patch design. It requires only slot lengths, widths, and position parameters to be determined. Also, it is suitable for later adding the reconfigurable capability. With the aid of full-wave simulator Ansoft HFSS, investigations on the effect of various dimensions of the antenna have been carried out via parametric analysis. Based on these investigations, a design procedure for a CP E-shaped patch is summarized. Various design examples with different substrate thicknesses and material types are presented and compared, with CP U-slot patch antennas, recently proposed in the literature. A prototype has been constructed following the suggested design procedure to cover the IEEE 802.11b/g WLAN band. The performance of the fabricated antenna was measured and compared with the simulation results for the reflection coefficient, axial ratio, radiation pattern, and antenna gain. Good agreement is achieved between simulation and measured results demonstrating a high gain and wideband performance. Second, a polarization reconfigurable single feed E-shaped patch antenna with wideband performance is proposed. The antenna is capable of switching from right-hand circular polarization (RHCP) to left-hand circular polarization (LHCP) and vice versa, with the aid of two RF PIN diodes that act as RF switches. The proposed structure which is simple; consists of a single-layer single fed radiating E-shaped patch and RF switch placed on each of its slots at an appropriate location. The design targets WLAN IEEE 802.11b/g frequency band (2.4- 2.5 GHz) as one example of the wireless applications. The idea is based on the first proposed design. In other words, if one of the switches is ON and the other is OFF, the two slot lengths will become effectively unequal and circular polarization will be obtained. If the states of the two switches are reversed, circular polarization with opposite orientation will be obtained at the same frequency band. Full-wave simulator Ansoft HFSS is again used for the analysis. Complete detailed DC biasing circuit of the switches for integration with the antenna is presented. Also, characterizations of the microwave components used in the biasing circuit are discussed. Antenna prototype has been fabricated and tested. Simulation results along with the measured one, for the reflection coefficient, axial ratio, radiation pattern, and antenna gain agree well, showing wide bandwidth and high gain for the two circularly polarized modes

The Circularly Polarized Corner-Truncated Rectangular Patch Antenna with Double Slits for UHF RFID System

This paper presents a circularly polarised rectangular patch antenna for ultra-high-frequency (UHF) radio frequency identification (RFID) applications using for Thailand standard. The antenna consists of a corner-truncated patch with double slits and a ground plane. The rectangular patch is fed by a single probe. The circular polarisation can be achieved by using three techniques such as adding double slits, using square shape and using a slanted cutting corner. The antenna has a compact size and appropriate for RFID system of Thailand standard. The measurement results show that |S11| (dB) is less than -10 dB. The antenna gain is 8.83 dBic with the unidirectional radiation pattern. The 3-dB axial ratio beamwidth is 65º over the frequency band of 914.4 - 929.9 MHz covering the UHF RFID applications for Thailand standard