380 research outputs found
RSS-based wireless LAN indoor localization and tracking using deep architectures
Wireless Local Area Network (WLAN) positioning is a challenging task indoors due to environmental constraints and the unpredictable behavior of signal propagation, even at a fixed location. The aim of this work is to develop deep learning-based approaches for indoor localization and tracking by utilizing Received Signal Strength (RSS). The study proposes Multi-Layer Perceptron (MLP), One and Two Dimensional Convolutional Neural Networks (1D CNN and 2D CNN), and Long Short Term Memory (LSTM) deep networks architectures for WLAN indoor positioning based on the data obtained by actual RSS measurements from an existing WLAN infrastructure in a mobile user scenario. The results, using different types of deep architectures including MLP, CNNs, and LSTMs with existing WLAN algorithms, are presented. The Root Mean Square Error (RMSE) is used as the assessment criterion. The proposed LSTM Model 2 achieved a dynamic positioning RMSE error of 1.73 m, which outperforms probabilistic WLAN algorithms such as Memoryless Positioning (RMSE: 10.35 m) and Nonparametric Information (NI) filter with variable acceleration (RMSE: 5.2 m) under the same experiment environment.ECSEL Joint Undertaking ; European Union's H2020 Framework Programme (H2020/2014-2020) Grant ; National Authority TUBITA
Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation
The Internet of Things (IoT) has started to empower the future of many
industrial and mass-market applications. Localization techniques are becoming
key to add location context to IoT data without human perception and
intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN)
technologies have advantages such as long-range, low power consumption, low
cost, massive connections, and the capability for communication in both indoor
and outdoor areas. These features make LPWAN signals strong candidates for
mass-market localization applications. However, there are various error sources
that have limited localization performance by using such IoT signals. This
paper reviews the IoT localization system through the following sequence: IoT
localization system review -- localization data sources -- localization
algorithms -- localization error sources and mitigation -- localization
performance evaluation. Compared to the related surveys, this paper has a more
comprehensive and state-of-the-art review on IoT localization methods, an
original review on IoT localization error sources and mitigation, an original
review on IoT localization performance evaluation, and a more comprehensive
review of IoT localization applications, opportunities, and challenges. Thus,
this survey provides comprehensive guidance for peers who are interested in
enabling localization ability in the existing IoT systems, using IoT systems
for localization, or integrating IoT signals with the existing localization
sensors
Magnetic-Assisted Initialization for Infrastructure-free Mobile Robot Localization
Most of the existing mobile robot localization solutions are either heavily
dependent on pre-installed infrastructures or having difficulty working in
highly repetitive environments which do not have sufficient unique features. To
address this problem, we propose a magnetic-assisted initialization approach
that enhances the performance of infrastructure-free mobile robot localization
in repetitive featureless environments. The proposed system adopts a
coarse-to-fine structure, which mainly consists of two parts: magnetic
field-based matching and laser scan matching. Firstly, the interpolated
magnetic field map is built and the initial pose of the mobile robot is partly
determined by the k-Nearest Neighbors (k-NN) algorithm. Next, with the fusion
of prior initial pose information, the robot is localized by laser scan
matching more accurately and efficiently. In our experiment, the mobile robot
was successfully localized in a featureless rectangular corridor with a success
rate of 88% and an average correct localization time of 6.6 seconds
Fingerprint-based Wi-Fi indoor localization using map and inertial sensors
It is a common understanding that the localization accuracy can be improved by indoor maps and inertial sensors. However, there is a lack of concrete and generic solutions that combine these two features together and practically demonstrate its validity. This article aims to provide such a solution based on the mainstream fingerprint-based indoor localization approach. First, we introduce the theorem called reference points placement, which gives a theoretical guide to place reference points. Second, we design a Wi-Fi signal propagation-based cluster algorithm to reduce the amount of computation. The paper gives a parameter called reliability to overcome the skewing of inertial sensors. Then we also present Kalman filter and Markov chain to predict the system status. The system is able to provide high-accuracy real-time tracking by integrating indoor map and inertial sensors with Wi-Fi signal strength. Finally, the proposed work is evaluated and compared with the previous Wi-Fi indoor localization systems. In addition, the effect of inertial sensors’ reliability is also discussed. Results are drawn from a campus office building which is about 80 m×140 m with 57 access points
CrowdFusion: Multi-Signal Fusion SLAM Positioning Leveraging Visible Light
With the fast development of location-based services, an ubiquitous indoor positioning approach with high accuracy and low calibration has become increasingly important. In this work, we target on a crowdsourcing approach with zero calibration effort based on visible light, magnetic field and WiFi to achieve sub-meter accuracy. We propose a CrowdFusion Simultaneous Localization and Mapping (SLAM) comprised of coarse-grained and fine-grained trace merging respectively based on the Iterative Closest Point (ICP) SLAM and GraphSLAM. ICP SLAM is proposed to correct the relative locations and directions of crowdsourcing traces and GraphSLAM is further adopted for fine-grained pose optimization. In CrowdFusion SLAM, visible light is used to accurately detect loop closures and magnetic field to extend the coverage. According to the merged traces, we construct a radio map with visible light and WiFi fingerprints. An enhanced particle filter fusing inertial sensors, visible light, WiFi and floor plan is designed, in which visible light fingerprinting is used to improve the accuracy and increase the resampling/rebooting efficiency. We evaluate CrowdFusion based on comprehensive experiments. The evaluation results show a mean accuracy of 0.67m for the merged traces and 0.77m for positioning, merely replying on crowdsourcing traces without professional calibration
The IPIN 2019 Indoor Localisation Competition - Description and Results
IPIN 2019 Competition, sixth in a series of IPIN competitions, was held at the CNR Research Area of Pisa (IT), integrated into the program of the IPIN 2019 Conference. It included two on-site real-time Tracks and three off-site Tracks. The four Tracks presented in this paper were set in the same environment, made of two buildings close together for a total usable area of 1000 m 2 outdoors and and 6000 m 2 indoors over three floors, with a total path length exceeding 500 m. IPIN competitions, based on the EvAAL framework, have aimed at comparing the accuracy performance of personal positioning systems in fair and realistic conditions: past editions of the competition were carried in big conference settings, university campuses and a shopping mall. Positioning accuracy is computed while the person carrying the system under test walks at normal walking speed, uses lifts and goes up and down stairs or briefly stops at given points. Results presented here are a showcase of state-of-the-art systems tested side by side in real-world settings as part of the on-site real-time competition Tracks. Results for off-site Tracks allow a detailed and reproducible comparison of the most recent positioning and tracking algorithms in the same environment as the on-site Tracks
A Review of Radio Frequency Based Localization for Aerial and Ground Robots with 5G Future Perspectives
Efficient localization plays a vital role in many modern applications of
Unmanned Ground Vehicles (UGV) and Unmanned aerial vehicles (UAVs), which would
contribute to improved control, safety, power economy, etc. The ubiquitous 5G
NR (New Radio) cellular network will provide new opportunities for enhancing
localization of UAVs and UGVs. In this paper, we review the radio frequency
(RF) based approaches for localization. We review the RF features that can be
utilized for localization and investigate the current methods suitable for
Unmanned vehicles under two general categories: range-based and fingerprinting.
The existing state-of-the-art literature on RF-based localization for both UAVs
and UGVs is examined, and the envisioned 5G NR for localization enhancement,
and the future research direction are explored
The IPIN 2019 Indoor Localisation Competition—Description and Results
IPIN 2019 Competition, sixth in a series of IPIN competitions, was held at the CNR Research Area of Pisa (IT), integrated into the program of the IPIN 2019 Conference. It included two on-site real-time Tracks and three off-site Tracks. The four Tracks presented in this paper were set in the same environment, made of two buildings close together for a total usable area of 1000 m 2 outdoors and and 6000 m 2 indoors over three floors, with a total path length exceeding 500 m. IPIN competitions, based on the EvAAL framework, have aimed at comparing the accuracy performance of personal positioning systems in fair and realistic conditions: past editions of the competition were carried in big conference settings, university campuses and a shopping mall. Positioning accuracy is computed while the person carrying the system under test walks at normal walking speed, uses lifts and goes up and down stairs or briefly stops at given points. Results presented here are a showcase of state-of-the-art systems tested side by side in real-world settings as part of the on-site real-time competition Tracks. Results for off-site Tracks allow a detailed and reproducible comparison of the most recent positioning and tracking algorithms in the same environment as the on-site Tracks
- …