Automatic Tuning of Silicon Photonics Millimeter-Wave Transceivers Building Blocks

Today, continuously growing wireless traffic have guided the progress in the wireless communication systems. Now, evolution towards next generation (5G) wireless communication systems are actively researched to accommodate expanding future data traffic. As one of the most promising candidates, integrating photonic devices in to the existing wireless system is considered to improve the performance of the systems. Emerging silicon photonic integrated circuits lead this integration more practically, and open new possibilities to the future communication systems. In this dissertation, the development of the electrical wireless communication systems are briefly explained. Also, development of the microwave photonics and silicon photonics are described to understand the possibility of the hybrid SiP integrated wireless communication systems. A limitation of the current electrical wireless systems are addressed, and hybrid integrated mm-wave silicon photonic receiver, and silicon photonic beamforming transmitter are proposed and analyzed in system level. In the proposed mm-wave silicon photonic receiver has 4th order pole-zero silicon photonic filter in the system. Photonic devices are vulnerable to the process and temperature variations. It requires manual calibration, which is expensive, time consuming, and prone to human errors. Therefore, precise automatic calibration solution with modified silicon photonic filter structure is proposed and demonstrated. This dissertation demonstrates fully automatic tuning of silicon photonic all-pass filter (APF)-based pole/zero filters using a monitor-based tuning method that calibrates the initial response by controlling each pole and zero individually via micro-heaters. The proposed tuning approach calibrates severely degraded initial responses to the designed elliptic filter shapes and allows for automatic bandwidth and center frequency reconfiguration of these filters. This algorithm is demonstrated on 2nd- and 4th-order filters fabricated in a standard silicon photonics foundry process. After the initial calibration, only 300ms is required to reconfigure a filter to a different center frequency. Thermal crosstalk between the micro-heaters is investigated, with substrate thinning demonstrated to suppress this effect and reduce filter calibration to less than half of the original thick substrate times. This fully automatic tuning approach opens the possibility of employing silicon photonic filters in real communication systems. Also, in the proposed beamforming transmitter, true-time delay ring resonator based 1x4 beamforming network is imbedded. A proposed monitor-based tuning method compensates fabrication variations and thermal crosstalk by controlling micro-heaters individually using electrical monitors. The proposed tuning approach successfully demonstrated calibration of OBFN from severely degraded initial responses to well-defined group delay response required for the targeted radiating angle with a range of 60◦ (-30◦ to 30◦ ) in a linear beamforming antenna array. This algorithm is demonstrated on OBFN fabricated in a standard silicon photonics foundry process. The calibrated OBFN operates at 30GHz and provide 2GHz bandwidth. This fully automatic tuning approach opens the possibility of employing silicon OBFN in real wideband mm-wave wireless communication systems by providing robust operating solutions. All the proposed photonic circuits are implemented using the standard silicon photonic technologies, and resulted in several publications in IEEE/OSA Journals and Conferences

Impact detection techniques using fibre-optic sensors for aerospace & defence

Impact detection techniques are developed for application in the aerospace and defence industries. Optical fibre sensors hold great promise for structural health monitoring systems and methods of interrogating fibre Bragg gratings (FBG) are investigated given the need for dynamic strain capture and multiplexed sensors. An arrayed waveguide grating based interrogator is developed. The relationships between key performance indicators, such as strain range and linearity of response, and parameters such as the FBG length and spectral width are determined. It was found that the inclusion of a semiconductor optical amplifier could increase the signal-to-noise ratio by ~300% as the system moves to its least sensitive. An alternative interrogator is investigated utilising two wave mixing in erbium-doped fibre in order to create an adaptive system insensitive to quasistatic strain and temperature drifts. Dynamic strain sensing was demonstrated at 200 Hz which remained functional while undergoing a temperature shift of 8.5 °C. In addition, software techniques are investigated for locating impact events on a curved composite structure using both time-of-flight triangulation and neural networks. A feature characteristic of composite damage creation is identified in dynamic signals captured during impact. An algorithm is developed which successfully distinguishes between signals characteristic of a non-damaging impact with those from a damaging impact with a classification accuracy of 93 – 96%. Finally, a demonstrator system is produced to exhibit some of the techniques developed in this thesis

Nanostructures Technology, Research, and Applications

Contains reports on twenty-four research projects and a list of publications.Joint Services Electronics Program Grant DAAHO4-95-1-0038Defense Advanced Research Projects Agency/Semiconductor Research Corporation SA1645-25508PGU.S. Army Research Office Grant DAAHO4-95-1-0564Defense Advanced Research Projects Agency/U.S. Navy - Naval Air Systems Command Contract N00019-95-K-0131Suss Advanced Lithography P. O. 51668National Aeronautics and Space Administration Contract NAS8-38249National Aeronautics and Space Administration Grant NAGW-2003Defense Advanced Research Projects Agency/U.S. Army Research Office Grant DAAHO4-951-05643M CorporationDefense Advanced Research Projects Agency/U.S. Navy - Office of Naval Research Contract N66001-97-1-8909National Science Foundation Graduate FellowshipU.S. Army Research Office Contract DAAHO4-94-G-0377National Science Foundation Contract DMR-940034National Science Foundation Grant DMR 94-00334Defense Advanced Research Projects Agency/U.S. Air Force - Office of Scientific Research Contract F49620-96-1-0126Harvard-Smithsonian Astrophysical Observatory Contract SV630304National Aeronautics and Space Administration Grant NAG5-5105Los Alamos National Laboratory Contract E57800017-9GSouthwest Research Institute Contract 83832MIT Lincoln Laboratory Advanced Concepts ProgramMIT Lincoln Laboratory Contract BX-655

LASER Tech Briefs, Spring 1994

Topics in this Laser Tech Brief include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Mechanics, Fabrication Technology, and books and reports

High Performance InP Photonic Integrated Circuits and Devices for Free Space Communications and Sensing

Communication needs have grown tremendously over the past few decades and will continue to increase in the future. In order to address these needs, 5G mobile communication systems are moving towards higher carrier frequencies in the millimeter wave (mmW) regime (30 – 300 GHz). Unlike traditional microwave frequencies, which have a relatively isotropic radiation pattern, the highly directional free space propagation characteristics of mmWs requires beemsteering and tracking between transmitters and receivers. One technology that is promising for future mobile communication systems is optical beam forming networks (OBFN). This technology uses photonic components to provide wide bandwidth and eliminate beam squint associated with RF methods to drive phased array antennas. The optical signals from the OBFN are down-converted using high speed photodiodes, which require high bandwidth, efficiency and RF output power. Here we present results on waveguide uni-traveling-carrier photodiodes integrated with mode converters for efficient coupling to a silicon nitride OBFN photonic integrated circuit (PIC). We demonstrate greater than 67 GHz bandwidth and extract efficiency limitations due to the space charge effect of the high carrier density under large optical input power.In addition to communication, highly directional beams can be used for free space sensors including LIDAR. While various frequency ranges provide benefits for specific applications, by increasing the frequency from the mmW regime to the near infrared (~193 THz), beam size can be further reduced to provide high resolution imaging and sensing. We present an indium phosphide transceiver PIC that incorporates a tunable laser, frequency discriminator, and receiver that can be used for frequency modulated continuous wave (FMCW) LIDAR when integrated with an optical phased array for 2D beamsteering. The transceiver provides wavelength tuning over 40 nm, a method for stabilizing the lasing frequency and imparting frequency modulation, and a balanced receiver for coherent detection. The components of the PIC will be discussed along with experimental verification of the functionality of this transceiver

Optical air data systems and methods

Systems and methods for sensing air includes at least one, and in some embodiments three, transceivers for projecting the laser energy as laser radiation to the air. The transceivers are scanned or aligned along several different axes. Each transceiver receives laser energy as it is backscattered from the air. A computer processes signals from the transceivers to distinguish molecular scattered laser radiation from aerosol scattered laser radiation and determines air temperatures, wind speeds, and wind directions based on the scattered laser radiation. Applications of the system to wind power site evaluation, wind turbine control, traffic safety, general meteorological monitoring and airport safety are presented