Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

Efficient Side-Channel Aware Elliptic Curve Cryptosystems over Prime Fields

Elliptic Curve Cryptosystems (ECCs) are utilized as an alternative to traditional public-key cryptosystems, and are more suitable for resource limited environments due to smaller parameter size. In this dissertation we carry out a thorough investigation of side-channel attack aware ECC implementations over finite fields of prime characteristic including the recently introduced Edwards formulation of elliptic curves, which have built-in resiliency against simple side-channel attacks. We implement Joye\u27s highly regular add-always scalar multiplication algorithm both with the Weierstrass and Edwards formulation of elliptic curves. We also propose a technique to apply non-adjacent form (NAF) scalar multiplication algorithm with side-channel security using the Edwards formulation. Our results show that the Edwards formulation allows increased area-time performance with projective coordinates. However, the Weierstrass formulation with affine coordinates results in the simplest architecture, and therefore has the best area-time performance as long as an efficient modular divider is available

A survey of hardware implementations of elliptic curve cryptographic systems

Elliptic Curve Cryptography (ECC) has gained much recognition over the last decades and has established itself among the well known public-key cryptography schemes, not least due its smaller key size and relatively lower computational effort compared to RSA. The wide employment of Elliptic Curve Cryptography in many different application areas has been leading to a variety of implementation types and domains ranging from pure software approaches over hardware implemenations to hardware/software co-designs. The following review provides an overview of state of the art hardware implemenations of ECC, specifically in regard to their targeted design goals. In this context the suitability of the hardware/software approach in regard to the security challenges opposed by the low-end embedded devices of the Internet of Things is briefly examined. The paper also outlines ECC’s vulnerability against quantum attacks and references one possible solution to that problem

Twisted Edwards-Form Elliptic Curve Cryptography for 8-bit AVR-based Sensor Nodes

Wireless Sensor Networks (WSNs) pose a number of unique security challenges that demand innovation in several areas including the design of cryptographic primitives and protocols. Despite recent progress, the efficient implementation of Elliptic Curve Cryptography (ECC) for WSNs is still a very active research topic and techniques to further reduce the time and energy cost of ECC are eagerly sought. This paper presents an optimized ECC implementation that we developed from scratch to comply with the severe resource constraints of 8-bit sensor nodes such as the MICAz and IRIS motes. Our ECC software uses Optimal Prime Fields (OPFs) as underlying algebraic structure and supports two different families of elliptic curves, namely Weierstraß-form and twisted Edwards-form curves. Due to the combination of efficient field arithmetic and fast group operations, we achieve an execution time of 5.8*10^6 clock cycles for a full 158-bit scalar multiplication on an 8-bit ATmega128 microcontroller, which is 2.78 times faster than the widely-used TinyECC library. Our implementation also shows that the energy cost of scalar multiplication on a MICAz (or IRIS) mote amounts to just 19 mJ when using a twisted Edwards curve over a 160-bit OPF. This result compares fairly well with the energy figures of two recently-presented hardware designs of ECC based on twisted Edwards curves

Implementation of ECC on FPGA using Scalable Architecture With equal Data and Key for WSN

Security of data transferred on the Wireless Sensor Network is of vital importance. In public key cryptography RSA algorithm has been used for a long time, but it does not meet the constraints of WSNs. Elliptic Curve Cryptography(ECC) has been employed recently because of its highest security for same length bit. ECC point multiplication operation is time consuming which affects the speed of encryption and decryption of data. Security in WSNs is addressed in our work, where a modified ECC is designed by performing the point multiplication using Montgomery multiplication technique that achieves considerable speed and with reduced area utilization. The ECC is first simulated on different FPGA devices, with key length 11, 112, 131 and 163 bits and the area-speed tradeoff is compared. ECC algorithm is implemented with software and hardware choosing Artix 7 XC7a100t-3csg324 FPGA which supports key lengths of 11, 112, 131 and 163 bits. When implemented on a Artix 7 FPGA, it completes 163 bit data encryption operation over GF(2163 ) in 1ms with the maximum frequency of 229MHz. The ECC algorithm is reconfigurable with low level to high level security with different bit key sizes. The proposed ECC algorithm modeled using VHDL and synthesized on Spartan 3 and 6, Virtex 4, 5 and 6 and Artix7 before the hardware implementation on Atrix 7. The design satisfies the needs of resource constrained devices by decreasing the encryption and decryption time to 1 ms with equal keylength and datasize, while device utilization is within 13%

Elliptic Curve Cryptography on Modern Processor Architectures

Abstract Elliptic Curve Cryptography (ECC) has been adopted by the US National Security Agency (NSA) in Suite "B" as part of its "Cryptographic Modernisation Program ". Additionally, it has been favoured by an entire host of mobile devices due to its superior performance characteristics. ECC is also the building block on which the exciting field of pairing/identity based cryptography is based. This widespread use means that there is potentially a lot to be gained by researching efficient implementations on modern processors such as IBM's Cell Broadband Engine and Philip's next generation smart card cores. ECC operations can be thought of as a pyramid of building blocks, from instructions on a core, modular operations on a finite field, point addition & doubling, elliptic curve scalar multiplication to application level protocols. In this thesis we examine an implementation of these components for ECC focusing on a range of optimising techniques for the Cell's SPU and the MIPS smart card. We show significant performance improvements that can be achieved through of adoption of EC