Efficiency of informational transfer in regular and complex networks

We analyze the process of informational exchange through complex networks by measuring network efficiencies. Aiming to study non-clustered systems, we propose a modification of this measure on the local level. We apply this method to an extension of the class of small-worlds that includes {\it declustered} networks, and show that they are locally quite efficient, although their clustering coefficient is practically zero. Unweighted systems with small-world and scale-free topologies are shown to be both globally and locally efficient. Our method is also applied to characterize weighted networks. In particular we examine the properties of underground transportation systems of Madrid and Barcelona and reinterpret the results obtained for the Boston subway network.Comment: 10 pages and 9 figure

Unsupervised Anomaly Detectors to Detect Intrusions in the Current Threat Landscape

Anomaly detection aims at identifying unexpected fluctuations in the expected behavior of a given system. It is acknowledged as a reliable answer to the identification of zero-day attacks to such extent, several ML algorithms that suit for binary classification have been proposed throughout years. However, the experimental comparison of a wide pool of unsupervised algorithms for anomaly-based intrusion detection against a comprehensive set of attacks datasets was not investigated yet. To fill such gap, we exercise seventeen unsupervised anomaly detection algorithms on eleven attack datasets. Results allow elaborating on a wide range of arguments, from the behavior of the individual algorithm to the suitability of the datasets to anomaly detection. We conclude that algorithms as Isolation Forests, One-Class Support Vector Machines and Self-Organizing Maps are more effective than their counterparts for intrusion detection, while clustering algorithms represent a good alternative due to their low computational complexity. Further, we detail how attacks with unstable, distributed or non-repeatable behavior as Fuzzing, Worms and Botnets are more difficult to detect. Ultimately, we digress on capabilities of algorithms in detecting anomalies generated by a wide pool of unknown attacks, showing that achieved metric scores do not vary with respect to identifying single attacks.Comment: Will be published on ACM Transactions Data Scienc

Friction, Vibration and Dynamic Properties of Transmission System under Wear Progression

This reprint focuses on wear and fatigue analysis, the dynamic properties of coating surfaces in transmission systems, and non-destructive condition monitoring for the health management of transmission systems. Transmission systems play a vital role in various types of industrial structure, including wind turbines, vehicles, mining and material-handling equipment, offshore vessels, and aircrafts. Surface wear is an inevitable phenomenon during the service life of transmission systems (such as on gearboxes, bearings, and shafts), and wear propagation can reduce the durability of the contact coating surface. As a result, the performance of the transmission system can degrade significantly, which can cause sudden shutdown of the whole system and lead to unexpected economic loss and accidents. Therefore, to ensure adequate health management of the transmission system, it is necessary to investigate the friction, vibration, and dynamic properties of its contact coating surface and monitor its operating conditions

Non-destructive quality control of carbon anodes using modal analysis, acousto-ultrasonic and latent variable methods

La performance des cuves d’électrolyse utilisées dans la production d’aluminium primaire par le procédé Hall-Héroult est fortement influencée par la qualité des anodes de carbone. Celles-ci sont de plus en plus variables en raison de la qualité décroissante des matières premières (coke et braie) et des changements de fournisseurs qui deviennent de plus en plus fréquents afin de réduire le coût d’achat et de rencontrer les spécifications des usines. En effet, les défauts des anodes, tels les fissures, les pores et les hétérogénéités, causés par cette variabilité, doivent être détectés le plus tôt possible afin d’éviter d’utiliser des anodes défectueuses dans les cuves et/ou d’apporter des ajustements au niveau du procédé de fabrication des anodes. Cependant, les fabricants d’anodes ne sont pas préparés pour réagir à cette situation afin de maintenir une qualité d'anode stable. Par conséquent, il devient prioritaire de développer des techniques permettant d’inspecter le volume complet de chaque anode individuelle afin d’améliorer le contrôle de la qualité des anodes et de compenser la variabilité provenant des matières premières. Un système d’inspection basé sur les techniques d’analyse modale et d’acousto-ultrasonique est proposé pour contrôler la qualité des anodes de manière rapide et non destructive. Les données massives (modes de vibration et signaux acoustiques) ont été analysées à l'aide de méthodes statistiques à variables latentes, telles que l'Analyse en Composantes Principales (ACP) et la Projection sur les Structures Latentes (PSL), afin de regrouper les anodes testées en fonction de leurs signatures vibratoires et acousto-ultrasoniques. Le système d'inspection a été premièrement investigué sur des tranches d'anodes industrielles et ensuite testé sur plusieurs anodes pleine grandeur produites sous différentes conditions à l’usine de Alcoa Deschambault au Québec (ADQ). La méthode proposée a permis de distinguer les anodes saines de celles contenant des défauts ainsi que d’identifier le type et la sévérité des défauts, et de les localiser. La méthode acousto-ultrasonique a été validée qualitativement par la tomographie à rayon-X, pour les analyses des tranches d’anodes. Pour les tests réalisés sur les blocs d’anode, la validation a été réalisée au moyen de photos recueillies après avoir coupé certaines anodes parmi celles testées.The performance of the Hall-Héroult electrolysis reduction process used for the industrial aluminium smelting is strongly influenced by the quality of carbon anodes, particularly by the presence of defects in their internal structure, such as cracks, pores and heterogeneities. This is partly due to the decreasing quality and increasing variability of the raw materials available on the market as well as the frequent suppliers changes made in order to meet the smelter’s specifications and to reduce purchasing costs. However, the anode producers are not prepared to cope with these variations and in order to maintain consistent anode quality. Consequently, it becomes a priority to develop alternative methods for inspecting each anode block to improve quality control and maintain consistent anode quality in spite of the variability of incoming raw materials.A rapid and non-destructive inspection system for anode quality control is proposed based on modal analysis and acousto-ultrasonic techniques. The large set of vibration and acousto-ultrasonic data collected from baked anode materials was analyzed using multivariate latent variable methods, such as Principal Component Analysis (PCA) and Partial Least Squares (PLS), in order to cluster the tested anodes based on vibration and their acousto-ultrasonic signatures. The inspection system was investigated first using slices collected from industrial anodes and then on several full size anodes produced under different conditions at the Alcoa Deschambault in Québec (ADQ). It is shown that the proposed method allows discriminating defect-free anodes from those containing various types of defects. In addition, the acousto-ultrasonic features obtained in different frequency ranges were found to be sensitive to the defects severities and were able to locate them in anode blocks. The acousto-ultrasonic method was validated qualitatively using X-ray computed tomography, when studying the anode slices. The results obtained on the full size anode blocks were validated by means of images collected after cutting some tested anodes

Stress Corrosion Cracking in Polymer Matrix Glass Fiber Composites

With the use of Polymer Matrix Glass Fiber Composites ever expanding, understanding conditions that lead to failure before expected service life is of increasing importance. Stress Corrosion Cracking (SCC) has proven to be one such example of conditions found in use in high voltage transmission line applications that leads to brittle fracture of polymer matrix composites. SCC has been proven to be the result of acid buildup on the lines due to corona discharges and water buildup. This acid leaches minerals from the fibers, leading to fracture at low loads and service life. In order to combat this problem, efforts are being made to determine which composites have greater resistance to SCC. This study was used to create a methodology to monitor for damage during SCC and classify damage by mechanism type (matrix cracking and fiber breaking) by using 4-point SCC bend testing, 3-point bend testing, a forward predictive model, unique post processing techniques, and microscopy. This would allow a classification in composite resistance to SCC as well as create a methodology for future research in this field. Concluding this study, only matrix cracking was able to be fully classified, however, a methodology was developed for future experimentation

Improving a wireless localization system via machine learning techniques and security protocols

The recent advancements made in Internet of Things (IoT) devices have brought forth new opportunities for technologies and systems to be integrated into our everyday life. In this work, we investigate how edge nodes can effectively utilize 802.11 wireless beacon frames being broadcast from pre-existing access points in a building to achieve room-level localization. We explain the needed hardware and software for this system and demonstrate a proof of concept with experimental data analysis. Improvements to localization accuracy are shown via machine learning by implementing the random forest algorithm. Using this algorithm, historical data can train the model and make more informed decisions while tracking other nodes in the future. We also include multiple security protocols that can be taken to reduce the threat of both physical and digital attacks on the system. These threats include access point spoofing, side channel analysis, and packet sniffing, all of which are often overlooked in IoT devices that are rushed to market. Our research demonstrates the comprehensive combination of affordability, accuracy, and security possible in an IoT beacon frame-based localization system that has not been fully explored by the localization research community

Meningioma classification using an adaptive discriminant wavelet packet transform

Meningioma subtypes classification is a real world problem from the domain of histological image analysis that requires new methods for its resolution. Computerised histopathology presents a whole new set of problems and introduces new challenges in image classification. High intra-class variation and low inter-class differences in textures is often an issue in histological image analysis problems such as Meningioma subtypes classification. In this thesis, we present an adaptive wavelets based technique that adapts to the variation in the texture of meningioma samples and provides high classification accuracy results. The technique provides a mechanism for attaining an image representation consisting of various spatial frequency resolutions that represent the image and are referred to as subbands. Each subband provides different information pertaining to the texture in the image sample. Our novel method, the Adaptive Discriminant Wavelet Packet Transform (ADWPT), provides a means for selecting the most useful subbands and hence, achieves feature selection. It also provides a mechanism for ranking features based upon the discrimination power of a subband. The more discriminant a subband, the better it is for classification. The results show that high classification accuracies are obtained by selecting subbands with high discrimination power. Moreover, subbands that are more stable i.e. have a higher probability of being selected provide better classification accuracies. Stability and discrimination power have been shown to have a direct relationship with classification accuracy. Hence, ADWPT acquires a subset of subbands that provide a highly discriminant and robust set of features for Meningioma subtype classification. Classification accuracies obtained are greater than 90% for most Meningioma subtypes. Consequently, ADWPT is a robust and adaptive technique which enables it to overcome the issue of high intra-class variation by statistically selecting the most useful subbands for meningioma subtype classification. It overcomes the issue of low inter-class variation by adapting to texture samples and extracting the subbands that are best for differentiating between the various meningioma subtype textures