Data allocation in disk arrays with multiple raid levels

There has been an explosion in the amount of generated data, which has to be stored reliably because it is not easily reproducible. Some datasets require frequent read and write access. like online transaction processing applications. Others just need to be stored safely and read once in a while, as in data mining. This different access requirements can be solved by using the RAID (redundant array of inexpensive disks) paradigm. i.e., RAIDi for the first situation and RAID5 for the second situation. Furthermore rather than providing two disk arrays with RAID 1 and RAID5 capabilities, a controller can be postulated to emulate both. It is referred as a heterogeneous disk array (HDA). Dedicating a subset of disks to RAID 1 results in poor disk utilization, since RAIDi vs RAID5 capacity and bandwidth requirements are not known a priori. Balancing disk loads when disk space is shared among allocation requests, referred to as virtual arrays - VAs poses a difficult problem. RAIDi disk arrays have a higher access rate per gigabyte than RAID5 disk arrays. Allocating more VAs while keeping disk utilizations balanced and within acceptable bounds is the goal of this study. Given its size and access rate a VA\u27s width or the number of its Virtual Disks -VDs is determined. VDs allocations on physical disks using vector-packing heuristics, with disk capacity and bandwidth as the two dimensions are shown to be the best. An allocation is acceptable if it does riot exceed the disk capacity and overload disks even in the presence of disk failures. When disk bandwidth rather than capacity is the bottleneck, the clustered RAID paradigm is applied, which offers a tradeoff between disk space and bandwidth. Another scenario is also considered where the RAID level is determined by a classification algorithm utilizing the access characteristics of the VA, i.e., fractions of small versus large access and the fraction of write versus read accesses. The effect of RAID 1 organization on its reliability and performance is studied too. The effect of disk failures on the X-code two disk failure tolerant array is analyzed and it is shown that the load across disks is highly unbalanced unless in an NxN array groups of N stripes are randomly rotated

Studies of disk arrays tolerating two disk failures and a proposal for a heterogeneous disk array

There has been an explosion in the amount of generated data in the past decade. Online access to these data is made possible by large disk arrays, especially in the RAID (Redundant Array of Independent Disks) paradigm. According to the RAID level a disk array can tolerate one or more disk failures, so that the storage subsystem can continue operating with disk failure(s). RAID 5 is a single disk failure tolerant array which dedicates the capacity of one disk to parity information. The content on the failed disk can be reconstructed on demand and written onto a spare disk. However, RAID5 does not provide enough protection for data since the data loss may occur when there is a media failure (unreadable sectors) or a second disk failure during the rebuild process. Due to the high cost of downtime in many applications, two disk failure tolerant arrays, such as RAID6 and EVENODD, have become popular. These schemes use 2/N of the capacity of the array for redundant information in order to tolerate two disk failures. RM2 is another scheme that can tolerate two disk failures, with slightly higher redundancy ratio. However, the performance of these two disk failure tolerant RAID schemes is impaired, since there are two check disks to be updated for each write request. Therefore, their performance, especially when there are disk failure(s), is of interest. In the first part of the dissertation, the operations for the RAID5, RAID6, EVENODD and RM2 schemes are described. A cost model is developed for these RAID schemes by analyzing the operations in various operating modes. This cost model offers a measure of the volume of data being transmitted, and provides adevice-independent comparison of the efficiency of these RAID schemes. Based on this cost model, the maximum throughput of a RAID scheme can be obtained given detailed disk characteristic and RAID configuration. Utilizing M/G/1 queuing model and other favorable modeling assumptions, a queuing analysis to obtain the mean read response time is described. Simulation is used to validate analytic results, as well as to evaluate the RAID systems in analytically intractable cases. The second part of this dissertation describes a new disk array architecture, namely Heterogeneous Disk Array (HDA). The HDA is motivated by a few observations of the trends in storage technology. The HDA architecture allows a disk array to have two forms of heterogeneity: (1) device heterogeneity, i.e., disks of different types can be incorporated in a single HDA; and (2) RAID level heterogeneity, i.e., various RAID schemes can coexist in the same array. The goal of this architecture is (1) utilizing the extra resource (i.e. bandwidth and capacity) introduced by new disk drives in an automated and efficient way; and (2) using appropriate RAID levels to meet the varying availability requirements for different applications. In HDA, each new object is associated with an appropriate RAID level and the allocation is carried out in a way to keep disk bandwidth and capacity utilizations balanced. Design considerations for the data structures of HDA metadata are described, followed by the actual design of the data structures and flowcharts for the most frequent operations. Then a data allocation algorithm is described in detail. Finally, the HDA architecture is prototyped based on the DASim simulation toolkit developed at NJIT and simulation results of an HDA with two RAID levels (RAID 1 and RAIDS) are presented

Robo-line storage: Low latency, high capacity storage systems over geographically distributed networks

Rapid advances in high performance computing are making possible more complete and accurate computer-based modeling of complex physical phenomena, such as weather front interactions, dynamics of chemical reactions, numerical aerodynamic analysis of airframes, and ocean-land-atmosphere interactions. Many of these 'grand challenge' applications are as demanding of the underlying storage system, in terms of their capacity and bandwidth requirements, as they are on the computational power of the processor. A global view of the Earth's ocean chlorophyll and land vegetation requires over 2 terabytes of raw satellite image data. In this paper, we describe our planned research program in high capacity, high bandwidth storage systems. The project has four overall goals. First, we will examine new methods for high capacity storage systems, made possible by low cost, small form factor magnetic and optical tape systems. Second, access to the storage system will be low latency and high bandwidth. To achieve this, we must interleave data transfer at all levels of the storage system, including devices, controllers, servers, and communications links. Latency will be reduced by extensive caching throughout the storage hierarchy. Third, we will provide effective management of a storage hierarchy, extending the techniques already developed for the Log Structured File System. Finally, we will construct a protototype high capacity file server, suitable for use on the National Research and Education Network (NREN). Such research must be a Cornerstone of any coherent program in high performance computing and communications

On the use of NAND flash memory in high-performance relational databases

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.Includes bibliographical references (p. 47-49).High-density NAND flash storage has become relatively inexpensive due to the popularity of various consumer electronics. Recently, several manufacturers have released IDE-compatible NAND flash-based drives in sizes up to 64 GB at reasonable (sub-$1000) prices. Because flash is significantly more durable than mechanical hard drives and requires considerably less energy, there is some speculation that large data centers will adopt these devices. As database workloads make up a substantial fraction of the processing done by data centers, it is interesting to ask how switching to flash-based storage will affect the performance of database systems. We evaluate this question using IDE-based flash drives from two major manufacturers. We measure their read and write performance and find that flash has excellent random read performance, acceptable sequential read performance, and quite poor write performance compared to conventional IDE disks. We then consider how standard database algorithms are affected by these performance characteristics and find that the fast random read capability dramatically improves the performance of secondary indexes and index-based join algorithms. We next investigate using logstructured filesystems to mitigate the poor write performance of flash and find an 8.2x improvement in random write performance, but at the cost of a 3.7x decrease in random read performance. Finally, we study techniques for exploiting the inherent parallelism of multiple-chip flash devices, and we find that adaptive coding strategies can yield a 2x performance improvement over static ones. We conclude that in many cases flash disk performance is still worse than on traditional drives and that current flash technology may not yet be mature enough for widespread database adoption if performance is a dominant factor. Finally, we briefly speculate how this landscape may change based on expected performance of next-generation flash memories.by Daniel Myers.S.M

Ironman: Open Source Containers and Virtualization in bare metal

Trabalho de projeto de mestrado, Engenharia Informática (Engenharia de Software) Universidade de Lisboa, Faculdade de Ciências, 2021Computer virtualization has become prevalent throughout the years for both business and personal use. It allows for hosting new machines, on computational resources that are left unused, running as independent computers. Apart from the traditional virtual machines, a more recent form of virtualization was introduced and will be explored in this project, containers, more specifically Linux Containers. While multiple virtualization tools are available, some of them require a premium payment, while others do not support container virtualization. For this project, LXD, an open source virtual instance manager, will be used to manage both virtual machines and containers. For added service availability, clustering support will also be developed. Clustering will enable multiple physical computers to host virtual instances as if they were a single machine. Coupled with the Ceph storage back end it allows for data to be replicated across all computers in the same cluster, enabling instance recovery when a computer from the cluster is faulty. The infrastructure deployment tool Puppet will be used to automate the installation and configuration of an LXD virtualization system for both a clustered and non clustered environment. This allows for simple and automatic physical host configuration limiting the required user input and thus decreasing the possibilities of system misconfiguration. LXD was tested for both environments and ultimately considered an effective virtualization tool, which when configured accordingly can be productized for a production environment

Convertible Codes: New Class of Codes for Efficient Conversion of Coded Data in Distributed Storage

Erasure codes are typically used in large-scale distributed storage systems to provide durability of data in the face of failures. In this setting, a set of k blocks to be stored is encoded using an [n, k] code to generate n blocks that are then stored on different storage nodes. A recent work by Kadekodi et al. [Kadekodi et al., 2019] shows that the failure rate of storage devices vary significantly over time, and that changing the rate of the code (via a change in the parameters n and k) in response to such variations provides significant reduction in storage space requirement. However, the resource overhead of realizing such a change in the code rate on already encoded data in traditional codes is prohibitively high. Motivated by this application, in this work we first present a new framework to formalize the notion of code conversion - the process of converting data encoded with an [n^I, k^I] code into data encoded with an [n^F, k^F] code while maintaining desired decodability properties, such as the maximum-distance-separable (MDS) property. We then introduce convertible codes, a new class of code pairs that allow for code conversions in a resource-efficient manner. For an important parameter regime (which we call the merge regime) along with the widely used linearity and MDS decodability constraint, we prove tight bounds on the number of nodes accessed during code conversion. In particular, our achievability result is an explicit construction of MDS convertible codes that are optimal for all parameter values in the merge regime albeit with a high field size. We then present explicit low-field-size constructions of optimal MDS convertible codes for a broad range of parameters in the merge regime. Our results thus show that it is indeed possible to achieve code conversions with significantly lesser resources as compared to the default approach of re-encoding

The Dark Energy Survey Data Management System

The Dark Energy Survey collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at NCSA and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that are specific to DESDM. In Fall 2007, we tested the current DESDM system on both simulated and real survey data. We used Teragrid to process 10 simulated DES nights (3TB of raw data), ingesting and calibrating approximately 250 million objects into the DES Archive database. We also used DESDM to process and calibrate over 50 nights of survey data acquired with the Mosaic2 camera. Comparison to truth tables in the case of the simulated data and internal crosschecks in the case of the real data indicate that astrometric and photometric data quality is excellent.Comment: To be published in the proceedings of the SPIE conference on Astronomical Instrumentation (held in Marseille in June 2008). This preprint is made available with the permission of SPIE. Further information together with preprint containing full quality images is available at http://desweb.cosmology.uiuc.edu/wik