Performance Optimization of Network Protocols for IEEE 802.11s-based Smart Grid Communications

The transformation of the legacy electric grid to Smart Grid (SG) poses numerous challenges in the design and development of an efficient SG communications network. While there has been an increasing interest in identifying the SG communications network and possible SG applications, specific research challenges at the network protocol have not been elaborated yet. This dissertation revisited each layer of a TCP/IP protocol stack which basically was designed for a wired network and optimized their performance in IEEE 802.11s-based Advanced Metering Infrastructure (AMI) communications network against the following challenges: security and privacy, AMI data explosion, periodic simultaneous data reporting scheduling, poor Transport Control Protocol (TCP) performance, Address Resolution Protocol (ARP) broadcast, and network interoperability. To address these challenges, layered and/or cross-layered protocol improvements were proposed for each layer of TCP/IP protocol stack. At the application layer, a tree-based periodic time schedule and a time division multiple access-based scheduling were proposed to reduce high contention when smart meters simultaneously send their reading. Homomorphic encryption performance was investigated to handle AMI data explosion while providing security and privacy. At the transport layer, a tree-based fixed Retransmission Timeout (RTO) setting and a path-error aware RTO that exploits rich information of IEEE 802.11s data-link layer path selection were proposed to address higher delay due to TCP mechanisms. At the network layer, ARP requests create broadcast storm problems in IEEE 802.11s due to the use of MAC addresses for routing. A secure piggybacking-based ARP was proposed to eliminate this issue. The tunneling mechanisms in the LTE network cause a downlink traffic problem to IEEE 802.11s. For the network interoperability, at the network layer of EPC network, a novel UE access list was proposed to address this issue. At the data-link layer, to handle QoS mismatch between IEEE 802.11s and LTE network, Dual Queues approach was proposed for the Enhanced Distributed Channel Access. The effectiveness of all proposed approaches was validated through extensive simulation experiments using a network simulator. The simulation results showed that the proposed approaches outperformed the traditional TCP/IP protocols in terms of end to end delay, packet delivery ratio, throughput, and collection time

A Survey on Multimedia-Based Cross-Layer Optimization in Visual Sensor Networks

Visual sensor networks (VSNs) comprised of battery-operated electronic devices endowed with low-resolution cameras have expanded the applicability of a series of monitoring applications. Those types of sensors are interconnected by ad hoc error-prone wireless links, imposing stringent restrictions on available bandwidth, end-to-end delay and packet error rates. In such context, multimedia coding is required for data compression and error-resilience, also ensuring energy preservation over the path(s) toward the sink and improving the end-to-end perceptual quality of the received media. Cross-layer optimization may enhance the expected efficiency of VSNs applications, disrupting the conventional information flow of the protocol layers. When the inner characteristics of the multimedia coding techniques are exploited by cross-layer protocols and architectures, higher efficiency may be obtained in visual sensor networks. This paper surveys recent research on multimedia-based cross-layer optimization, presenting the proposed strategies and mechanisms for transmission rate adjustment, congestion control, multipath selection, energy preservation and error recovery. We note that many multimedia-based cross-layer optimization solutions have been proposed in recent years, each one bringing a wealth of contributions to visual sensor networks

Link failure detection, network recovery, and network reliability in multi-hop wireless networks

In this thesis, we study Wireless Mesh Network (WMN) and Mobile Ad hoc NETwork (MANET), which are two kinds of wireless multi-hop communication networks. WMNs and MANETs are promising technologies that have the ability to provide effective solutions to many applications in the technological, social, military, disaster recovery, and economic fields. Some of these applications are the extension of the cellular network's coverage, broadband internet access, and community and neighborhood networks. The big challenge in these kinds of networks is the frequent link failures, which make them less reliable compared to other kinds of networks. Implementing a fast mechanism to detect link failures, effective and reliable routing protocols and metrics, and a powerful reconfiguration scheme to recover from the link failures greatly enhance the WMNs and MANETs performance, and increase their reliability and availability. Our research has three directions. In the first direction, we study link failure detection approaches and link failure recovery techniques. In this direction, we mathematically analyze Hello based link failure detection approach implemented in routing protocols that use two routes, one as a primary route, and the other one as a backup route that is immediately used upon link failures. The objectives behind the above analysis are to mathematically calculate the packet delivery ratio, and to find how much gain we could achieve by using two routes instead of one. Our results show that the packet delivery is increased by 1.5 times by using two routes instead of one. It also shows that applying two routes is essential to cover high link failure rate values, and the need using two routes instead of one is more urgent in WMNs and MANETs with higher link failure rate values, i.e. less reliable networks. In addition to that, we propose a novel framework that dynamically assigns the values of Hello based link failure detection scheme parameters based on the communication types and the QoS requirements. Besides that, we propose a novel protocol to enhance the Hello based link failure detection scheme performance. In the second direction, we study the reliable routing protocols and metrics. This thesis proposes a novel adaptive routing protocol to increase the network connectivity and reliability, while minimizing the hop count, reducing the network nodes' spatial distribution and memory, and simplifying the routing process. The network reliability and connectivity are investigated in the last direction. Based in our study, the only ways to provide reliable and stable communications, virtually decrease the packet loss to zero, and to support multimedia communications in MANETs and WMNs are by using multi-route instead of one, and letting the routing protocols select the most stable routes among the available routes. The network node density specifies the probability that a route exists between any randomly chosen source and destination pair. Thus, to ensure the existence of two routes between any source and destination pairs, the node density must be above a certain threshold. In this thesis, we propose a mathematical model to find the above threshold. Our results show that the probability to have two routes exponentially increases with the number of nodes until it reaches the saturation region where the increase of the number of nodes has negligible improvements in terms of network availability. In addition to that, we study the effects of nodes mobility on the network connectivity. Our work is evaluated by MATLAB