Grasping bulky objects with two anthropomorphic hands

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThis paper presents an algorithm to compute precision grasps for bulky objects using two anthropomorphic hands. We use objects modeled as point clouds obtained from a sensor camera or from a CAD model. We then process the point clouds dividing them into two set of slices where we look for sets of triplets of points. Each triplet must accomplish some physical conditions based on the structure of the hands. Then, the triplets of points from each set of slices are evaluated to find a combination that satisfies the force closure condition (FC). Once one valid couple of triplets have been found the inverse kinematics of the system is computed in order to know if the corresponding points are reachable by the hands, if so, motion planning and a collision check are performed to asses if the final grasp configuration of the system is suitable. The paper inclu des some application examples of the proposed approachAccepted versio

A stiffness-based quality measure for compliant grasps and fixtures

This paper presents a systematic approach to quantifying the effectiveness of compliant grasps and fixtures of an object. The approach is physically motivated and applies to the grasping of two- and three-dimensional objects by any number of fingers. The approach is based on a characterization of the frame-invariant features of a grasp or fixture stiffness matrix. In particular, we define a set of frame-invariant characteristic stiffness parameters, and provide physical and geometric interpretation for these parameters. Using a physically meaningful scheme to make the rotational and translational stiffness parameters comparable, we define a frame-invariant quality measure, which we call the stiffness quality measure. An example of a frictional grasp illustrates the effectiveness of the quality measure. We then consider the optimal grasping of frictionless polygonal objects by three and four fingers. Such frictionless grasps are useful in high-load fixturing applications, and their relative simplicity allows an efficient computation of the globally optimal finger arrangement. We compute the optimal finger arrangement in several examples, and use these examples to discuss properties that characterize the stiffness quality measure

Exploration of the grasp space using independent contact and non-graspable regions

This report presents the use of independent contact and non-graspable regions to generate the grasp space for 2D and 3D discrete objects. The grasp space is constructed via a sampling method, which provides samples of force-closure or non force-closure grasps, used to compute regions of the graspable or non-graspable space, respectively. The method provides a reliable procedure for an efficient generation of the whole grasp space for n-finger grasps on discrete objects; two examples on 2D objects are provided to illustrate its performance. The approach has several applications in manipulation and regrasping of objects, as it provides a large number of force-closure and non force-closure grasps in a short time

Independent contact regions for discretized 3D objects with frictionless contacts

This paper deals with the problem of determining independent contact regions on a 3D object boundary such that a seven finger frictionless grasp with a contact point in each region assures a force-closure grasp on the object, independently of the exact position of the contact points. These regions provide robustness in front of finger positioning errors in grasp and fixturing applications. The object’s structure is discretized in a cloud of points, so the procedure is applicable to objects of any arbitrary shape. The procedure finds an initial form-closure grasp that is iteratively improved through an oriented search procedure: once a locally optimum grasp has been reached, the independent contact regions are computed. The procedure has been implemented, and application examples are included in the paper

Computation of independent contact regions for grasping 3-D objects

Precision grasp synthesis has received a lot of attention in past few last years. However, real mechanical hands can hardly assure that the fingers will precisely touch the object at the computed contact points. The concept of independent contact regions (ICRs) was introduced to provide robustness to finger positioning errors during an object grasping: A finger contact anywhere inside each of these regions assures a force-closure grasp, despite the exact contact position. This paper presents an efficient algorithm to compute ICRs with any number of frictionless or frictional contacts on the surface of any 3-D object. The proposed approach generates the independent regions by growing them around the contact points of a given starting grasp. A two-phase approach is provided to find a locally optimal force-closure grasp that serves as the starting grasp, considering as grasp quality measure the largest perturbation wrench that the grasp can resist, independently of the perturbation direction. The proposed method can also be applied to compute ICRs when several contacts are fixed beforehand. The approach has been implemented, and application examples are included to illustrate its performance.Peer Reviewe

Determining force-closure grasps reachable by a given hand

The paper presents an approach to find contact points on an object surface that are reachable by a given hand and such that the resulting grasp satisfies the force-closure condition. This is a very common problem that still requires a practical solution. The proposed method is based on the computation of a set of independent contact regions on the object boundary such that a finger contact on each region produces a force-closure grasp, and then this set of regions is iteratively recomputed while looking for a set of contact points that are reachable by a given hand. The search is done guided by a cost function that indicates the proximity of the hand fingertips to a candidate set of grasping contact points. The approach has been implemented for the Schunk Anthropomorphic Hand and planar objects,and application examples are included to illustrate its performance.Postprint (published version

Prioritized independent contact regions for form closure grasps

Proceedings of: 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'11), September 25-30, 2011, San Francisco, USAThe concept of independent contact regions on a target object’s surface, in order to compensate for shortcomings in the positioning accuracy of robotic grasping devices, is well known. However, the numbers and distributions of contact points forming such regions is not unique and depends on the underlying computational method. In this work we present a computation scheme allowing to prioritize contact points for inclusion in the independent regions. This enables a user to affect their shape in order to meet the demands of the targeted application. The introduced method utilizes frictionless contact constraints and is able to efficiently approximate the space of disturbances resistible by all grasps comprising contacts within the independent regions.European Community's Seventh Framework ProgramThis research has been partially supported by the HANDLE project, funded by the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement ICT 231640

On Grasp Quality Measures: Grasp Robustness and Contact Force Distribution in Underactuated and Compliant Robotic Hands

The availability of grasp quality measures is fundamental for grasp planning and control, and also to drive designers in the definition and optimization of robotic hands. This work investigates on grasp robustness and quality indexes that can be applied to power grasps with underactuated and compliant hands. When dealing with such types of hands, there is the need of an evaluation method that takes into account the forces that can be actually controlled by the hand, depending on its actuation system. In this paper, we study the potential contact robustness and the potential grasp robustness (PCR, PGR) indexes. They both consider main grasp properties: contact points, friction coefficient, etc., but also hand degrees of freedom and consequently, the directions of controllable contact forces. The PCR comes directly from the classical grasp theory and can be easily evaluated, but often leads to too conservative solutions, particularly when the grasp has many contacts. The PGR is more complex and computationally heavier, but gives a more realistic, even if still conservative, estimation of the overall grasp robustness, also in power grasps. We evaluated the indexes for various simulated grasps, performed with underactuated and compliant hands, and we analyzed their variations with respect to the main grasp parameters

On the synthesis of feasible and prehensile robotic grasps

Trabajo presentado al ICRA celebrado en Minnesota del 14 al 18 de mayo de 2012.This work proposes a solution to the grasp synthesis problem, which consist of finding the best hand configuration to grasp a given object for a specific manipulation task while satisfying all the necessary constraints. This problem had been divided into sequential sub-problems, including contact region determination, hand inverse kinematics and force distribution, with the particular constraints of each step tackled independently. This may lead to unnecessary effort, such as when one of the problems has no solution given the output of the previous step as input. To overcome this issue, we present a kinestatic formulation of the grasp synthesis problem that introduces compliance both at the joints and the contacts. This provides a proper framework to synthesize a feasible and prehensile grasp by considering simultaneously the necessary grasping constraints, including contact reachability, object restraint, and force controllability. As a consequence, a solution of the proposed model results in a set of hand configurations that allows to execute the grasp using only a position controller. The approach is illustrated with experiments on a simple planar hand using two fingers and an anthropomorphic robotic hand using three fingers.This work was partially supported by the CICYT projects DPI2010-18449, DPI2010-15446 and DPI2011-22471, and by the European Commission under CP grants no. 248587, “THE Hand Embodied”, and no. 270350, “ROBLOG”, within the FP7-ICT-2009-4-2-1 program “Cognitive Systems and Robotics”.Peer Reviewe

Searching a valid hand configuration to perform a given grasp

Peer ReviewedPostprint (published version