27 research outputs found

    Time Sensitive Networking Protocol Implementation for Linux End Equipment

    Get PDF
    By bringing industrial-grade robustness and reliability to Ethernet, Time Sensitive Networking (TSN) offers an IEEE standard communication technology that enables interoperability between standard-conformant industrial devices from any vendor. It also eliminates the need for physical separation of critical and non-critical communication networks, which allows a direct exchange of data between operation centers and companies, a concept at the heart of the Industrial Internet of Things (IIoT). This article describes creating an end-to-end TSN network using specialized PCI Express (PCIe) cards and two final Linux endpoints. For this purpose, the two primary standards of TSN, IEEE 802.1AS (regarding clock synchronization), and IEEE 802.1Qbv (regarding time scheduled traffic) have been implemented in Linux equipment as well as a configuration and monitoring system.This work has been supported by the Ministerio de Economía y Competitividad of Spain within the project TEC2017-84011-R and FEDER funds as well as by the Department of Education of the Basque Government within the fund for research groups of the Basque university system IT978-16

    Kommunikation in der Automation : Beiträge des Jahreskolloquiums KommA 2022

    Get PDF

    Kommunikation in der Automation : Beiträge des Jahreskolloquiums KommA 2022

    Get PDF

    Automation, Protection and Control of Substation Based on IEC 61850

    Get PDF
    Reliability of power system protection system has been a key issue in the substation operation due to the use of multi-vendor equipment of proprietary features, environmental issues, and complex fault diagnosis. Failure to address these issues could have a significant effect on the performance of the entire electricity grid. With the introduction of IEC 61850 standard, substation automation system (SAS) has significantly altered the scenario in utilities and industries as indicated in this thesis

    Time-Sensitive Networking for Industrial Automation: Challenges, Opportunities, and Directions

    Full text link
    With the introduction of Cyber-Physical Systems (CPS) and Internet of Things (IoT) into industrial applications, industrial automation is undergoing tremendous change, especially with regard to improving efficiency and reducing the cost of products. Industrial automation applications are often required to transmit time- and safety-critical data to monitor and control industrial processes, especially for critical control systems. There are a number of solutions to meet these requirements (e.g., priority-based real-time schedules and closed-loop feedback control systems). However, due to their different processing capabilities (e.g., in the end devices and network switches), different vendors may come out with distinct solutions, and this makes the large-scale integration of devices from different vendors difficult or impossible. IEEE 802.1 Time-Sensitive Networking (TSN) is a standardization group formed to enhance and optimize the IEEE 802.1 network standards, especially for Ethernet-based networks. These solutions can be evolved and adapted into a cross-industry scenario, such as a large-scale distributed industrial plant, which requires multiple industrial entities working collaboratively. This paper provides a comprehensive review on the current advances in TSN standards for industrial automation. We present the state-of-the-art IEEE TSN standards and discuss the opportunities and challenges when integrating each protocol into the industry domains. Finally, we discuss some promising research about applying the TSN technology to industrial automation applications

    Kommunikation und Bildverarbeitung in der Automation

    Get PDF
    In diesem Open-Access-Tagungsband sind die besten Beiträge des 9. Jahreskolloquiums "Kommunikation in der Automation" (KommA 2018) und des 6. Jahreskolloquiums "Bildverarbeitung in der Automation" (BVAu 2018) enthalten. Die Kolloquien fanden am 20. und 21. November 2018 in der SmartFactoryOWL, einer gemeinsamen Einrichtung des Fraunhofer IOSB-INA und der Technischen Hochschule Ostwestfalen-Lippe statt. Die vorgestellten neuesten Forschungsergebnisse auf den Gebieten der industriellen Kommunikationstechnik und Bildverarbeitung erweitern den aktuellen Stand der Forschung und Technik. Die in den Beiträgen enthaltenen anschaulichen Beispiele aus dem Bereich der Automation setzen die Ergebnisse in den direkten Anwendungsbezug

    Investigating Performance and Reliability of Process Bus Networks for Digital Protective Relaying

    Get PDF
    To reduce the cost of complex and long copper wiring, as well as to achieve flexibility in signal communications, IEC 61850 part 9-2 proposes a process bus communication network between process level switchyard equipments, and bay level protection and control (P&C) Intelligent Electronic Devices (IEDs). After successful implementation of Ethernet networks for IEC 61850 standard part 8-1 (station bus) at several substations worldwide, major manufacturers are currently working on the development of interoperable products for the IEC 61850-9-2 based process bus. The major technical challenges for applying Ethernet networks at process level include: 1) the performance of time critical messages for protection applications; 2) impacts of process bus Ethernet networks on the reliability of substation protection systems. This work starts with the performance analysis in terms of time critical Sampled Value (SV) messages loss and/or delay over the IEC 61850-9-2 process bus networks of a typical substation. Unlike GOOSE, the SV message is not repeated several times, and therefore, there is no assurance that each SV message will be received from the process bus network at protection IEDs. Therefore, the detailed modeling of IEC 61850 based substation protection devices, communication protocols, and packet format is carried out using an industry-trusted simulation tool OPNET, to study and quantify number of SV loss and delay over the process bus. The impact of SV loss/delay on digital substation protection systems is evident, and recognized by several manufacturers. Therefore, a sample value estimation algorithm is developed in order to enhance the performance of digital substation protection functions by estimating the lost and delayed sampled values. The error of estimation is evaluated in detail considering several scenarios of power system relaying. The work is further carried out to investigate the possible impact of SV loss/delay on protection functions, and test the proposed SV estimation algorithm using the hardware setup. Therefore, a state-of-the-art process bus laboratory with the protection IEDs and merging unit playback simulator using industrial computers on the QNX hard-real-time platform, is developed for a typical IEC 61850-9-2 based process bus network. Moreover, the proposed SV estimation algorithm is implemented as a part of bus differential and transmission line distance protection IEDs, and it is tested using the developed experimental setup for various SV loss/delay scenarios and power system fault conditions. In addition to the performance analysis, this work also focuses on the reliability aspects of protection systems with process bus communication network. To study the impact of process bus communication on reliability indices of a substation protection function, the detailed reliability modeling and analysis is carried out for a typical substation layout. First of all, reliability analysis is done using Reliability Block Diagrams (RBD) considering various practical process bus architectures, as well as, time synchronization techniques. After obtaining important failure rates from the RBD, an extended Markov model is proposed to analyze the reliability indices of protection systems, such as, protection unavailability, abnormal unavailability, and loss of security. It is shown with the proposed Markov model that the implementation of sampled value estimation improves the reliability indices of a protection system

    Zeitsynchronisation in drahtgebundenen Rechnernetzen

    Get PDF
    Ausgehend von einer Analyse des Standes der Technik werden neuartige Verfahren für die Zeitsynchronisation in drahtgebundenen Netzwerken vorgestellt. Unter anderem wird, zum ersten Mal im Bereich der Zeitsynchronisation, eine Kombination aus Linearer Optimierung und Broadcast-Nachrichten vorgestellt, was eine Verbindung der jeweiligen Genauigkeits- und Skalierbarkeitsvorteile ermöglicht. Weiterhin wird, ebenfalls zum ersten Mal im Bereich der Zeitsynchronisation, eine Kombination aus Linearer Optimierung und Temperaturkompensation vorgestellt.Based on an analysis of the state of the art, several new time synchronization methods for wired networks are proposed. Among others, for the first time in the synchronization domain, a combination of linear programming and broadcast messages is proposed, which allows combining the respective accuracy and scalability advantages. Moreover, this thesis proposes combining linear programming and temperature compensation, also for the first time in the field of time synchronization
    corecore