The Problem of Adhesion Methods and Locomotion Mechanism Development for Wall-Climbing Robots

This review considers a problem in the development of mobile robot adhesion methods with vertical surfaces and the appropriate locomotion mechanism design. The evolution of adhesion methods for wall-climbing robots (based on friction, magnetic forces, air pressure, electrostatic adhesion, molecular forces, rheological properties of fluids and their combinations) and their locomotion principles (wheeled, tracked, walking, sliding framed and hybrid) is studied. Wall-climbing robots are classified according to the applications, adhesion methods and locomotion mechanisms. The advantages and disadvantages of various adhesion methods and locomotion mechanisms are analyzed in terms of mobility, noiselessness, autonomy and energy efficiency. Focus is placed on the physical and technical aspects of the adhesion methods and the possibility of combining adhesion and locomotion methods

Climbing Robot for Steel Bridge Inspection: Design Challenges

Inspection of bridges often requires high risk operations such as working at heights, in confined spaces, in hazardous environments; or sites inaccessible by humans. There is significant motivation for robotic solutions which can carry out these inspection tasks. When inspection robots are deployed in real world inspection scenarios, it is inevitable that unforeseen challenges will be encountered. Since 2011, the New South Wales Roads & Maritime Services and the Centre of Excellence for Autonomous Systems at the University of Technology, Sydney, have been working together to develop an innovative climbing robot to inspect high risk locations on the Sydney Harbour Bridge. Many engineering challenges have been faced throughout the development of several prototype climbing robots, and through field trials in the archways of the Sydney Harbour Bridge. This paper will highlight some of the key challenges faced in designing a climbing robot for inspection, and then present an inchworm inspired robot which addresses many of these challenges

Infrastructure robotics: Research challenges and opportunities

Infrastructure robotics is about research on and development of methodologies that enable robotic systems to be used in civil infrastructure inspection, maintenance and rehabilitation. This paper briefly discusses the current research challenges and opportunities in infrastructure robotics, and presents a review of the research activities and projects in this field at the Centre for Autonomous Systems, University of Technology Sydney

A climbing autonomous robot for inspection application in 3D complex environment

Often inspection and maintenance work involve a large number of highly dangerous manual operations, especially within industrial fields such as shipbuilding and construction. This paper deals with the autonomous climbing robot which uses the “caterpillar” concept to climb in complex 3D metallic-based structures. During its motion the robot generates in real-time the path and grasp planning in order to ensure stable self-support to avoid the environment obstacles, and to optimise the robot consumption during the inspection. The control and monitoring of the robot is achieved through an advanced Graphical User Interface to allow an effective and user friendly operation of the robot. The experiments confirm its advantages in executing the inspection operations.This work has been partially funded by the Spanish government agency CICYT under project TAP95-0088. The authors would like to acknowledge the technical support of A. Jardón, E. Jiménez, C. Palazuelos, J.A. Campo and F. Manera and also the company of APTECA for its help in the mechanical development.Publicad

A concept selection method for designing climbing robots

This paper presents a concept selection methodology, inspired by the Verein Deutscher Ingenieure (VDI) model and Pugh's weighted matrix method, for designing climbing robots conceptually based on an up-to-date literature review. The proposed method is illustrated with a case study of ongoing research, the investigation of an adaptable and energetically autonomous climbing robot, in Loughborough University

Design and Development of an Inspection Robotic System for Indoor Applications

The inspection and monitoring of industrial sites, structures, and infrastructure are important issues for their sustainability and further maintenance. Although these tasks are repetitive and time consuming, and some of these environments may be characterized by dust, humidity, or absence of natural light, classical approach relies on large human activities. Automatic or robotic solutions can be considered useful tools for inspection because they can be effective in exploring dangerous or inaccessible sites, at relatively low-cost and reducing the time required for the relief. The development of a paradigmatic system called Inspection Robotic System (IRS) is the main objective of this paper to demonstrate the feasibility of mechatronic solutions for inspection of industrial sites. The development of such systems will be exploited in the form of a tool kit to be flexible and installed on a mobile system, in order to be used for inspection and monitoring, possibly introducing high efficiency, quality and repetitiveness in the related sector. The interoperability of sensors with wireless communication may form a smart sensors tool kit and a smart sensor network with powerful functions to be effectively used for inspection purposes. Moreover, it may constitute a solution for a broad range of scenarios spacing from industrial sites, brownfields, historical sites or sites dangerous or difficult to access by operators. First experimental tests are reported to show the engineering feasibility of the system and interoperability of the mobile hybrid robot equipped with sensors that allow real-time multiple acquisition and storage

A prototype climbing robot for inspection of complex ferrous structures

© 2010 by World Scientific Publishing Co. Pte. Ltd. Currently many hazardous maintenance and inspection tasks, such as paint inspection and corrosion condition monitoring of steel structures, are being performed manually by workers, which causes serious health and safety problems. This paper presents a concept climbing robot, with the aim of exploring highly complex ferrous structures such as steel bridges, for the purpose of inspection duties. To demonstrate this concept, a quadruped prototype is developed. A modular architecture that simplifies the development process and improves reusability has been implemented. Permanent magnet compliant pads on each foot provide a simple method of adhesion on the highly complex and unsmooth surface of a bridge. A simple detachment mechanism has been employed. Experiments have been conducted to prove the concept and test the design of the prototype

Design and Development of a Mobile Climbing Robot for Wind Turbine Inspection

Wind turbines (WT) have become an essential renewable energy source as the contribution of WT farms has reached megawatts scale. However, wind turbine blades (WTB) are subjected to failure due to many loading effects such as aerodynamic, gravity and centrifugal loads and operation in harsh environments such as ultraviolet (UV) radiation, ice, hail, temperature variation, dirt, and salt. As a result, the blades suffer different types of damage. Consequently, a periodic inspection process is required to detect and repair defects before a catastrophic failure happens. This thesis presents a literature review of wall climbing robots to identify the most appropriate locomotion and adhesion method to use for a WT climbing machine that can take a large payload of non-destructive testing (NDT) sensors up to a blade and deploy them with scanning arms. A review of wind turbine blade construction, various loading effects on blades and types of damage in blades is followed by a review of the NDT techniques used for inspecting WTB. The above review determines the design requirements to achieve the aim of the current research which is to design a low-cost and reliable mobile robot which will be able to climb the WT tower and subsequently scan the blade surface to perform the inspection using various sensors to identify and classify damages. This robot system should be able to access all the critical areas of the blade structure in a stable and secure way. It should be stable enough to allow the various test sensors to scan the blade structure in the shortest possible time. The thesis describes the development of a tower climbing robot that uses magnetic adhesion to adhere to the WT. As a preliminary study, a simulation model is developed using COMSOL Multiphysics to simulate the magnetic adhesion force while climbing the tower. A test rig is designed and fabricated to measure the magnetic adhesion force experimentally to validate the simulation model. The response surface methodology (RSM) using Box-Behnken design (BBD) is used to design and perform experiments to optimise different independent variables i.e. air gap, the distance between magnets in an array and backplate (yoke) thickness that affect the magnetic adhesion force. A scaled-down prototype magnetic adhesion climbing robot has been designed and constructed for wind turbine blade inspection. The robot is 0.29 m long with two 1.0 m long arms, weighs 10.0 kg and can carry a maximum 2.0 kg payload of NDT sensors. Optimum design of a magnetic adhesion mechanism has been developed for the climbing robot prototype that maximises the magnetic adhesion force. The robot is equipped with two arms that can be extended by one meter to come close to the blade for inspection. Each arm is equipped with a gripper that can hold an inspection tool of weight up to one kilogram. A scaled-down wind turbine has been modelled using SolidWorks and a portion of it constructed to experimentally test the scaled-down climbing robot. To scale up the robot prototype for operation on a normal sized wind turbine, a 100 m tall wind turbine with three 76 m long blades has been modelled and the prototype robot scaled up based on these dimensions. The scaled-up robot is 3.0 m long, weighs 1135 kg and has two 10 m long arms. Static stress analysis and flow simulation have been carried out to check the durability of the scaled-up robot while climbing the wind turbine tower. The procedure for scaling up the adhesion mechanism to achieve equilibrium of the robot has been introduced based on the reaction force concluded from the static stress and flow simulation study. As a result, the maximum payload that each arm can carry has been calculated for both the scaled-down prototype (1 kg) and the scaled-up design (50 kg). This concludes the utility and robustness of the wall climbing robot as a robotic solution for wind turbine blade inspection

Locomotion system for ground mobile robots in uneven and unstructured environments

One of the technology domains with the greatest growth rates nowadays is service robots. The extensive use of ground mobile robots in environments that are unstructured or structured for humans is a promising challenge for the coming years, even though Automated Guided Vehicles (AGV) moving on flat and compact grounds are already commercially available and widely utilized to move components and products inside indoor industrial buildings. Agriculture, planetary exploration, military operations, demining, intervention in case of terrorist attacks, surveillance, and reconnaissance in hazardous conditions are important application domains. Due to the fact that it integrates the disciplines of locomotion, vision, cognition, and navigation, the design of a ground mobile robot is extremely interdisciplinary. In terms of mechanics, ground mobile robots, with the exception of those designed for particular surroundings and surfaces (such as slithering or sticky robots), can move on wheels (W), legs (L), tracks (T), or hybrids of these concepts (LW, LT, WT, LWT). In terms of maximum speed, obstacle crossing ability, step/stair climbing ability, slope climbing ability, walking capability on soft terrain, walking capability on uneven terrain, energy efficiency, mechanical complexity, control complexity, and technology readiness, a systematic comparison of these locomotion systems is provided in [1]. Based on the above-mentioned classification, in this thesis, we first introduce a small-scale hybrid locomotion robot for surveillance and inspection, WheTLHLoc, with two tracks, two revolving legs, two active wheels, and two passive omni wheels. The robot can move in several different ways, including using wheels on the flat, compact ground,[1] tracks on soft, yielding terrain, and a combination of tracks, legs, and wheels to navigate obstacles. In particular, static stability and non-slipping characteristics are considered while analyzing the process of climbing steps and stairs. The experimental test on the first prototype has proven the planned climbing maneuver’s efficacy and the WheTLHLoc robot's operational flexibility. Later we present another development of WheTLHLoc and introduce WheTLHLoc 2.0 with newly designed legs, enabling the robot to deal with bigger obstacles. Subsequently, a single-track bio-inspired ground mobile robot's conceptual and embodiment designs are presented. This robot is called SnakeTrack. It is designed for surveillance and inspection activities in unstructured environments with constrained areas. The vertebral column has two end modules and a variable number of vertebrae linked by compliant joints, and the surrounding track is its essential component. Four motors drive the robot: two control the track motion and two regulate the lateral flexion of the vertebral column for steering. The compliant joints enable limited passive torsion and retroflection of the vertebral column, which the robot can use to adapt to uneven terrain and increase traction. Eventually, the new version of SnakeTrack, called 'Porcospino', is introduced with the aim of allowing the robot to move in a wider variety of terrains. The novelty of this thesis lies in the development and presentation of three novel designs of small-scale mobile robots for surveillance and inspection in unstructured environments, and they employ hybrid locomotion systems that allow them to traverse a variety of terrains, including soft, yielding terrain and high obstacles. This thesis contributes to the field of mobile robotics by introducing new design concepts for hybrid locomotion systems that enable robots to navigate challenging environments. The robots presented in this thesis employ modular designs that allow their lengths to be adapted to suit specific tasks, and they are capable of restoring their correct position after falling over, making them highly adaptable and versatile. Furthermore, this thesis presents a detailed analysis of the robots' capabilities, including their step-climbing and motion planning abilities. In this thesis we also discuss possible refinements for the robots' designs to improve their performance and reliability. Overall, this thesis's contributions lie in the design and development of innovative mobile robots that address the challenges of surveillance and inspection in unstructured environments, and the analysis and evaluation of these robots' capabilities. The research presented in this thesis provides a foundation for further work in this field, and it may be of interest to researchers and practitioners in the areas of robotics, automation, and inspection. As a general note, the first robot, WheTLHLoc, is a hybrid locomotion robot capable of combining tracked locomotion on soft terrains, wheeled locomotion on flat and compact grounds, and high obstacle crossing capability. The second robot, SnakeTrack, is a small-size mono-track robot with a modular structure composed of a vertebral column and a single peripherical track revolving around it. The third robot, Porcospino, is an evolution of SnakeTrack and includes flexible spines on the track modules for improved traction on uneven but firm terrains, and refinements of the shape of the track guidance system. This thesis provides detailed descriptions of the design and prototyping of these robots and presents analytical and experimental results to verify their capabilities