32 research outputs found

    Distributed mobility management for a flat architecture in 5G mobile networks: solutions, analysis and experimental validation

    Get PDF
    In the last years, the commercial deployment of data services in mobile networks has been evolving quickly, providing enhanced radio access technologies and more efficient network architectures. Nowadays, mobile users enjoy broadband and ubiquitous wireless access through their portable devices, like smartphones and tablets, exploiting the connectivity offered by the modern 4G network. Nevertheless, the technological evolution keeps moving towards the development of next generation networks, or 5G, aiming at further improving the current system in order to cope with the huge data traffic growth foreseen in the future years. One of the possible research guidelines aims at innovating the mobile networks architecture by designing a flat system. Indeed, current systems are built upon a centralized and hierarchical structure, where multiple access networks are connected to a central core hosting crucial network functions, e.g., charging, control and maintenance, as well as mobility management, which is the main topic of this thesis. In such a central mobility management system, users’ traffic is aggregated at some key nodes in the core, called mobility anchors. Thus, an anchor can easily handle user’s mobility by redirecting traffic flows to his/her location, but i) it poses scalability issues, ii) it represents a single point of failure, and iii) the routing path is in general suboptimal. These problems can be overcome moving to a flat architecture, adopting a Distributed Mobility Management (DMM) system, where the centralized anchor is removed. This thesis develops within the DMM framework, presenting the design, analysis, implementation and experimental validation of several DMM protocols. In this work we describe original protocols for client-based and network-based mobility management, as well as a hybrid solution. We study analytically our solutions to evaluate their signaling cost, the packet delivery cost, and the latency introduced to handle a handover event. Finally, we assess the validity of some of our protocols with experiments run over a network prototype built in our lab implementing such solutions.El despliegue comercial de los servicios de datos en las redes móviles ha evolucionado rápidamente en los últimos años, proporcionando tecnologías de acceso radio más avanzadas y arquitecturas de red más eficientes. Los usuarios ya pueden disfrutar de los servicios de banda ancha desde sus dispositivos móviles, como smartphones y tablets, aprovechando la conectividad de las modernas redes 4G. Sin embargo, la evolución tecnológica sigue trazando su camino hasta el desarrollo de las redes de próxima generación, o 5G, en previsión del enorme aumento del tráfico de los años futuros. Una de las innovaciones bajo estudio aborda la arquitectura de las redes móviles, con el objetivo de diseñar un sistema plano. Efectivamente, el sistema actual se basa en una estructura centralizada y jerárquica, en la cual múltiples redes de acceso se conectan al núcleo central, dónde residen funciones cruciales para el control de la red y facturación, así como la gestión de la movilidad, que es el tema central de esta tesis. En un sistema con gestión centralizada de la movilidad, se agregan los flujos de tráfico en algunos nodos claves situados en el núcleo de la red, llamados anclas de movilidad. De este modo, un ancla puede fácilmente redirigir los flujos al lugar donde se halla el usuario, pero i) supone problemas de escalabilidad, ii) representa un punto único de fallo, y iii) el encaminamiento es en general sub-óptimo. Estos problemas se pueden resolver pasando a una arquitectura plana, cambiándose a un sistema de gestión distribuida de la movilidad (Distributed Mobility Management – DMM), donde no hay anclas centralizadas. Esta tesis se desarrolla dentro el marco propuesto por DMM, presentando el diseño, el análisis, la implementación y la validación experimental de varios protocolos de movilidad distribuida. Se describen soluciones basadas en el cliente y en la red, así como una solución híbrida. El funcionamiento de las soluciones ha sido estudiado analíticamente, para evaluar los costes de señalización, el coste del transporte de los paquetes y la latencia para gestionar el traspaso de los usuarios de una red a otra. Finalmente, la validez de los protocolos ha sido demostrada con experimentos sobre un prototipo donde se implementan algunas de las soluciones utilizando el equipamiento de nuestro laboratorio.Programa Oficial de Doctorado en Ingeniería TelemáticaPresidente: Arturo Azcorra Saloña.- Secretario: Ramón Agüero Calvo.- Vocal: Jouni Korhone

    Acesso banda larga sem fios em ambientes heterogéneos de próxima geração

    Get PDF
    Doutoramento em Engenharia InformáticaO acesso ubíquo à Internet é um dos principais desafios para os operadores de telecomunicações na próxima década. O número de utilizadores da Internet está a crescer exponencialmente e o paradigma de acesso "always connected, anytime, anywhere" é um requisito fundamental para as redes móveis de próxima geração. A tecnologia WiMAX, juntamente com o LTE, foi recentemente reconhecida pelo ITU como uma das tecnologias de acesso compatíveis com os requisitos do 4G. Ainda assim, esta tecnologia de acesso não está completamente preparada para ambientes de próxima geração, principalmente devido à falta de mecanismos de cross-layer para integração de QoS e mobilidade. Adicionalmente, para além das tecnologias WiMAX e LTE, as tecnologias de acesso rádio UMTS/HSPA e Wi-Fi continuarão a ter um impacto significativo nas comunicações móveis durante os próximos anos. Deste modo, é fundamental garantir a coexistência das várias tecnologias de acesso rádio em termos de QoS e mobilidade, permitindo assim a entrega de serviços multimédia de tempo real em redes móveis. Para garantir a entrega de serviços multimédia a utilizadores WiMAX, esta Tese propõe um gestor cross-layer WiMAX integrado com uma arquitectura de QoS fim-a-fim. A arquitectura apresentada permite o controlo de QoS e a comunicação bidireccional entre o sistema WiMAX e as entidades das camadas superiores. Para além disso, o gestor de cross-layer proposto é estendido com eventos e comandos genéricos e independentes da tecnologia para optimizar os procedimentos de mobilidade em ambientes WiMAX. Foram realizados testes para avaliar o desempenho dos procedimentos de QoS e mobilidade da arquitectura WiMAX definida, demonstrando que esta é perfeitamente capaz de entregar serviços de tempo real sem introduzir custos excessivos na rede. No seguimento das extensões de QoS e mobilidade apresentadas para a tecnologia WiMAX, o âmbito desta Tese foi alargado para ambientes de acesso sem-fios heterogéneos. Neste sentido, é proposta uma arquitectura de mobilidade transparente com suporte de QoS para redes de acesso multitecnologia. A arquitectura apresentada integra uma versão estendida do IEEE 802.21 com suporte de QoS, bem como um gestor de mobilidade avançado integrado com os protocolos de gestão de mobilidade do nível IP. Finalmente, para completar o trabalho desenvolvido no âmbito desta Tese, é proposta uma extensão aos procedimentos de decisão de mobilidade em ambientes heterogéneos para incorporar a informação de contexto da rede e do terminal. Para validar e avaliar as optimizações propostas, foram desenvolvidos testes de desempenho num demonstrador inter-tecnologia, composta pelas redes de acesso WiMAX, Wi-Fi e UMTS/HSPA.Ubiquitous Internet access is one of the main challenges for the telecommunications industry in the next decade. The number of users accessing the Internet is growing exponentially and the network access paradigm of “always connected, anytime, anywhere” is a central requirement for the so-called Next Generation Mobile Networks (NGMN). WiMAX, together with LTE, was recently recognized by ITU as one of the compliant access technologies for 4G. Nevertheless, WiMAX is not yet fully prepared for next generation environments, mainly due to the lack of QoS and mobility crosslayer procedures to support real-time multimedia services delivery. Furthermore, besides the 4G compliant WiMAX and LTE radio access technologies, UMTS/HSPA and Wi-Fi will also have a significant impact in the mobile communications during the next years. Therefore, it is fundamental to ensure the coexistence of multiple radio access technologies in what QoS and mobility procedures are concerned, thereby allowing the delivery of real-time services in mobile networks. In order to provide the WiMAX mobile users with the demanded multimedia services, it is proposed in this Thesis a WiMAX cross-layer manager integrated in an end-to-end all-IP QoS enabled architecture. The presented framework enables the QoS control and bidirectional communication between WiMAX and the upper layer network entities. Furthermore, the proposed cross-layer framework is extended with media independent events and commands to optimize the mobility procedures in WiMAX environments. Tests were made to evaluate the QoS and mobility performance of the defined architecture, demonstrating that it is perfectly capable of handling and supporting real time services without introducing an excessive cost in the network. Following the QoS and mobility extensions provided for WiMAX, the scope of this Thesis is broaden and a seamless mobility architecture with QoS support in heterogeneous wireless access environments is proposed. The presented architecture integrates an extended version of the IEEE 802.21 framework with QoS support, as well as an advanced mobility manager integrated with the IP level mobility management protocols. Finally, to complete the work within the framework of this Thesis, it is proposed an extension to the handover decisionmaking processes in heterogeneous access environments through the integration of context information from both the network entities and the enduser. Performance tests were developed in a real testbed to validate the proposed optimizations in an inter-technology handover scenario involving WiMAX, Wi-Fi and UMTS/HSPA

    Radio Communications

    Get PDF
    In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

    Quality of service aware data dissemination in vehicular Ad Hoc networks

    Full text link
    Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

    SLICING-BASED RESOURCE ALLOCATION AND MOBILITY MANAGEMENT FOR EMERGING WIRELESS NETWORKS

    Get PDF
    The proliferation of smart mobile devices and user applications has continued to contribute to the tremendous volume of data traffic in cellular networks. Moreover, with the feature of heterogeneous connectivity interfaces of these smart devices, it becomes more complex for managing the traffic volume in the context of mobility. To surmount this challenge, service and resource providers are looking for alternative mechanisms that can successfully facilitate managing network resources and mobility in a more dynamic, predictive and distributed manner. New concepts of network architectures such as Software-Defined Network (SDN) and Network Function Virtualization (NFV) have paved the way to move from static to flexible networks. They make networks more flexible (i.e., network providers capable of on-demand provisioning), easily customizable and cost effective. In this regard, network slicing is emerging as a new technology built on the concepts of SDN and NFV. It splits a network infrastructure into isolated virtual networks and allows them to manage network resources based on their requirements and characteristics. Most of the existing solutions for network slicing are facing challenges in terms of resource and mobility management. Regarding resource management, it creates challenges in terms of provisioning network throughput, end-to-end delay, and fairness resources allocation for each slice, whereas, in the case of mobility management, due to the rapid change of user mobility the network slice operator would like to hold the mobility controlling over its clients across different access networks, rather than the network operator, to ensure better services and user experience. In this thesis, we propose two novel architectural solutions to solve the challenges identified above. The first proposed solution introduces a Network Slicing Resource Management (NSRM) mechanism that assigns the required resources for each slice, taking into consideration resource isolation between different slices. The second proposed v solution provides a Mobility Management architecture-based Network Slicing (MMNS) where each slice manages its users across heterogeneous radio access technologies such as WiFi, LTE and 5G networks. In MMNS architecture, each slice has different mobility demands (e.g,. latency, speed and interference) and these demands are governed by a network slice configuration and service characteristics. In addition, NSRM ensures isolating, customizing and fair sharing of distributed bandwidths between various network slices and users belonging to the same slice depending on different requirements of each one. Whereas, MMNS is a logical platform that unifies different Radio Access Technologies (RATs) and allows all slices to share them in order to satisfy different slice mobility demands. We considered two software simulations, namely OPNET Modeler and OMNET++, to validate the performance evaluation of the thesis contributions. The simulation results for both proposed architectures show that, in case of NSRM, the resource blocking is approximately 35% less compared to the legacy LTE network, which it allows to accommodate more users. The NSRM also successfully maintains the isolation for both the inter and intra network slices. Moreover, the results show that the NSRM is able to run different scheduling mechanisms where each network slice guarantee perform its own scheduling mechanism and simultaneously with other slices. Regarding the MMNS, the results show the advantages of the proposed architecture that are the reduction of the tunnelling overhead and the minimization of the handover latency. The MMNS results show the packets delivery cost is optimal by reducing the number of hops that the packets transit between a source node and destination. Additionally, seamless session continues of a user IP-flow between different access networks interfaces has been successfully achieved

    Securing Handover in Wireless IP Networks

    Get PDF
    In wireless and mobile networks, handover is a complex process that involves multiple layers of protocol and security executions. With the growing popularity of real time communication services such as Voice of IP, a great challenge faced by handover nowadays comes from the impact of security implementations that can cause performance degradation especially for mobile devices with limited resources. Given the existing networks with heterogeneous wireless access technologies, one essential research question that needs be addressed is how to achieve a balance between security and performance during the handover. The variations of security policy and agreement among different services and network vendors make the topic challenging even more, due to the involvement of commercial and social factors. In order to understand the problems and challenges in this field, we study the properties of handover as well as state of the art security schemes to assist handover in wireless IP networks. Based on our analysis, we define a two-phase model to identify the key procedures of handover security in wireless and mobile networks. Through the model we analyze the performance impact from existing security schemes in terms of handover completion time, throughput, and Quality of Services (QoS). As our endeavor of seeking a balance between handover security and performance, we propose the local administrative domain as a security enhanced localized domain to promote the handover performance. To evaluate the performance improvement in local administrative domain, we implement the security protocols adopted by our proposal in the ns-2 simulation environment and analyze the measurement results based on our simulation test

    Mobility management across converged IP-based heterogeneous access networks

    Get PDF
    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 8/2/2010.In order to satisfy customer demand for a high performance “global” mobility service, network operators (ISPs, carriers, mobile operators, etc.) are facing the need to evolve to a converged “all-IP” centric heterogeneous access infrastructure. However, the integration of such heterogeneous access networks (e.g. 802.11, 802.16e, UMTS etc) brings major mobility issues. This thesis tackles issues plaguing existing mobility management solutions in converged IP-based heterogeneous networks. In order to do so, the thesis firstly proposes a cross-layer mechanism using the upcoming IEEE802.21 MIH services to make intelligent and optimized handovers. In this respect, FMIPv6 is integrated with the IEEE802.21 mechanism to provide seamless mobility during the overall handover process. The proposed solution is then applied in a simulated vehicular environment to optimize the NEMO handover process. It is shown through analysis and simulations of the signalling process that the overall expected handover (both L2 and L3) latency in FMIPv6 can be reduced by the proposed mechanism by 69%. Secondly, it is expected that the operator of a Next Generation Network will provide mobility as a service that will generate significant revenues. As a result, dynamic service bootstrapping and authorization mechanisms must be in place to efficiently deploy a mobility service (without static provisioning), which will allow only legitimate users to access the service. A GNU Linux based test-bed has been implemented to demonstrate this. The experiments presented show the handover performance of the secured FMIPv6 over the implemented test-bed compared to plain FMIPv6 and MIPv6 by providing quantitative measurements and results on the quality of experience perceived by the users of IPv6 multimedia applications. The results show the inclusion of the additional signalling of the proposed architecture for the purpose of authorization and bootstrapping (i.e. key distribution using HOKEY) has no adverse effect on the overall handover process. Also, using a formal security analysis tool, it is shown that the proposed mechanism is safe/secure from the induced security threats. Lastly, a novel IEEE802.21 assisted EAP based re-authentication scheme over a service authorization and bootstrapping framework is presented. AAA based authentication mechanisms like EAP incur signalling overheads due to large RTTs. As a result, overall handover latency also increases. Therefore, a fast re-authentication scheme is presented which utilizes IEEE802.21 MIH services to minimize the EAP authentication process delays and as a result reduce the overall handover latency. Analysis of the signalling process based on analytical results shows that the overall handover latency for mobility protocols will be approximately reduced by 70% by the proposed scheme

    An improved locator identifier split architecture (ILISA) to enhance mobility

    Get PDF
    The increased use of mobile devices has prompted the need for efficient mobility management protocols to ensure continuity of communication sessions as users switch connection between available wireless access networks in an area. Locator/Identifier (LOC/ID) split architectures are designed to, among other functions, enable the mobility of nodes on the Internet. The protocols based on these architectures enable mobility by ensuring that the identifier (IP address) used for creating a communication session is maintained throughout the lifetime of the session and only the location of a mobile node (MN) is updated as the device moves. While the LOC/ID protocols ensure session continuity during handover, they experience packet loss and long service disruption times as the MN moves from one access network to another. The mobility event causes degradation of throughput, poor network utilisation, and affects the stability of some applications, such as video players. This poor performance was confirmed from the experiments we conducted on a laboratory testbed running Locator Identifier Separation Protocol MN (LISP-MN) and Mobile IPv6 (MIPv6). The MIPv6, as the standardised IETF mobility protocol, was used to benchmark the performance of LISP-MN. The poor performance recorded is owed to the design of the LISP-MN’s architecture, with no specific way of handling packets that arrive during handover events. Our main aim in this thesis is to introduce an Improved Locator/Identifier Split Architecture (ILISA) designed to enhance the mobility of nodes running a LOC/ID protocol by mitigating packet loss and reducing service disruption in handovers. A new network node, Loc-server, is central to the new architecture with the task of buffering incoming packets during handover and forwarding the packets to the MN on the completion of the node’s movement process. We implemented ILISA with LISP-MN on a laboratory testbed to evaluate its performance in different mobility scenarios. Our experimental results show a significant improvement in the mobility performance of MNs as reflected by the different network parameters investigated
    corecore