Development of inventory datasets through remote sensing and direct observation data for earthquake loss estimation

This report summarizes the lessons learnt in extracting exposure information for the three study sites, Thessaloniki, Vienna and Messina that were addressed in SYNER-G. Fine scale information on exposed elements that for SYNER-G include buildings, civil engineering works and population, is one of the variables used to quantify risk. Collecting data and creating exposure inventories is a very time-demanding job and all possible data-gathering techniques should be used to address the data shortcoming problem. This report focuses on combining direct observation and remote sensing data for the development of exposure models for seismic risk assessment. In this report a summary of the methods for collecting, processing and archiving inventory datasets is provided in Chapter 2. Chapter 3 deals with the integration of different data sources for optimum inventory datasets, whilst Chapters 4, 5 and 6 provide some case studies where combinations between direct observation and remote sensing have been used. The cities of Vienna (Austria), Thessaloniki (Greece) and Messina (Italy) have been chosen to test the proposed approaches.JRC.G.5-European laboratory for structural assessmen

Object-Based Greenhouse Classification from GeoEye-1 and WorldView-2 Stereo Imagery

Remote sensing technologies have been commonly used to perform greenhouse detection and mapping. In this research, stereo pairs acquired by very high-resolution optical satellites GeoEye-1 (GE1) and WorldView-2 (WV2) have been utilized to carry out the land cover classification of an agricultural area through an object-based image analysis approach, paying special attention to greenhouses extraction. The main novelty of this work lies in the joint use of single-source stereo-photogrammetrically derived heights and multispectral information from both panchromatic and pan-sharpened orthoimages. The main features tested in this research can be grouped into different categories, such as basic spectral information, elevation data (normalized digital surface model; nDSM), band indexes and ratios, texture and shape geometry. Furthermore, spectral information was based on both single orthoimages and multiangle orthoimages. The overall accuracy attained by applying nearest neighbor and support vector machine classifiers to the four multispectral bands of GE1 were very similar to those computed from WV2, for either four or eight multispectral bands. Height data, in the form of nDSM, were the most important feature for greenhouse classification. The best overall accuracy values were close to 90%, and they were not improved by using multiangle orthoimages

A methodology to produce geographical information for land planning using very-high resolution images

Actualmente, os municípios são obrigados a produzir, no âmbito da elaboração dos instrumentos de gestão territorial, cartografia homologada pela autoridade nacional. O Plano Director Municipal (PDM) tem um período de vigência de 10 anos. Porém, no que diz respeito à cartografia para estes planos, principalmente em municípios onde a pressão urbanística é elevada, esta periodicidade não é compatível com a dinâmica de alteração de uso do solo. Emerge assim, a necessidade de um processo de produção mais eficaz, que permita a obtenção de uma nova cartografia de base e temática mais frequentemente. Em Portugal recorre-se à fotografia aérea como informação de base para a produção de cartografia de grande escala. Por um lado, embora este suporte de informação resulte em mapas bastante rigorosos e detalhados, a sua produção têm custos muito elevados e consomem muito tempo. As imagens de satélite de muito alta-resolução espacial podem constituir uma alternativa, mas sem substituir as fotografias aéreas na produção de cartografia temática, a grande escala. O tema da tese trata assim da satisfação das necessidades municipais em informação geográfica actualizada. Para melhor conhecer o valor e utilidade desta informação, realizou-se um inquérito aos municípios Portugueses. Este passo foi essencial para avaliar a pertinência e a utilidade da introdução de imagens de satélite de muito alta-resolução espacial na cadeia de procedimentos de actualização de alguns temas, quer na cartografia de base quer na cartografia temática. A abordagem proposta para solução do problema identificado baseia-se no uso de imagens de satélite e outros dados digitais em ambiente de Sistemas de Informação Geográfica. A experimentação teve como objectivo a extracção automática de elementos de interesse municipal a partir de imagens de muito alta-resolução espacial (fotografias aéreas ortorectificadas, imagem QuickBird, e imagem IKONOS), bem como de dados altimétricos (dados LiDAR). Avaliaram-se as potencialidades da informação geográfica extraídas das imagens para fins cartográficos e analíticos. Desenvolveram-se quatro casos de estudo que reflectem diferentes usos para os dados geográficos a nível municipal, e que traduzem aplicações com exigências diferentes. No primeiro caso de estudo, propõe-se uma metodologia para actualização periódica de cartografia a grande escala, que faz uso de fotografias aéreas vi ortorectificadas na área da Alta de Lisboa. Esta é uma aplicação quantitativa onde as qualidades posicionais e geométricas dos elementos extraídos são mais exigentes. No segundo caso de estudo, criou-se um sistema de alarme para áreas potencialmente alteradas, com recurso a uma imagem QuickBird e dados LiDAR, no Bairro da Madre de Deus, com objectivo de auxiliar a actualização de cartografia de grande escala. No terceiro caso de estudo avaliou-se o potencial solar de topos de edifícios nas Avenidas Novas, com recurso a dados LiDAR. No quarto caso de estudo, propõe-se uma série de indicadores municipais de monitorização territorial, obtidos pelo processamento de uma imagem IKONOS que cobre toda a área do concelho de Lisboa. Esta é uma aplicação com fins analíticos onde a qualidade temática da extracção é mais relevante.Currently, the Portuguese municipalities are required to produce homologated cartography, under the Territorial Management Instruments framework. The Municipal Master Plan (PDM) has to be revised every 10 years, as well as the topographic and thematic maps that describe the municipal territory. However, this period is inadequate for representing counties where urban pressure is high, and where the changes in the land use are very dynamic. Consequently, emerges the need for a more efficient mapping process, allowing obtaining recent geographic information more often. Several countries, including Portugal, continue to use aerial photography for large-scale mapping. Although this data enables highly accurate maps, its acquisition and visual interpretation are very costly and time consuming. Very-High Resolution (VHR) satellite imagery can be an alternative data source, without replacing the aerial images, for producing large-scale thematic cartography. The focus of the thesis is the demand for updated geographic information in the land planning process. To better understand the value and usefulness of this information, a survey of all Portuguese municipalities was carried out. This step was essential for assessing the relevance and usefulness of the introduction of VHR satellite imagery in the chain of procedures for updating land information. The proposed methodology is based on the use of VHR satellite imagery, and other digital data, in a Geographic Information Systems (GIS) environment. Different algorithms for feature extraction that take into account the variation in texture, color and shape of objects in the image, were tested. The trials aimed for automatic extraction of features of municipal interest, based on aerial and satellite high-resolution (orthophotos, QuickBird and IKONOS imagery) as well as elevation data (altimetric information and LiDAR data). To evaluate the potential of geographic information extracted from VHR images, two areas of application were identified: mapping and analytical purposes. Four case studies that reflect different uses of geographic data at the municipal level, with different accuracy requirements, were considered. The first case study presents a methodology for periodic updating of large-scale maps based on orthophotos, in the area of Alta de Lisboa. This is a situation where the positional and geometric accuracy of the extracted information are more demanding, since technical mapping standards must be complied. In the second case study, an alarm system that indicates the location of potential changes in building areas, using a QuickBird image and LiDAR data, was developed for the area of Bairro da Madre de Deus. The goal of the system is to assist the updating of large scale mapping, providing a layer that can be used by the municipal technicians as the basis for manual editing. In the third case study, the analysis of the most suitable roof-tops for installing solar systems, using LiDAR data, was performed in the area of Avenidas Novas. A set of urban environment indicators obtained from VHR imagery is presented. The concept is demonstrated for the entire city of Lisbon, through IKONOS imagery processing. In this analytical application, the positional quality issue of extraction is less relevant.GEOSAT – Methodologies to extract large scale GEOgraphical information from very high resolution SATellite images (PTDC/GEO/64826/2006), e-GEO – Centro de Estudos de Geografia e Planeamento Regional, da Faculdade de Ciências Sociais e Humanas, no quadro do Grupo de Investigação Modelação Geográfica, Cidades e Ordenamento do Territóri

GeoAI-enhanced Techniques to Support Geographical Knowledge Discovery from Big Geospatial Data

abstract: Big data that contain geo-referenced attributes have significantly reformed the way that I process and analyze geospatial data. Compared with the expected benefits received in the data-rich environment, more data have not always contributed to more accurate analysis. “Big but valueless” has becoming a critical concern to the community of GIScience and data-driven geography. As a highly-utilized function of GeoAI technique, deep learning models designed for processing geospatial data integrate powerful computing hardware and deep neural networks into various dimensions of geography to effectively discover the representation of data. However, limitations of these deep learning models have also been reported when People may have to spend much time on preparing training data for implementing a deep learning model. The objective of this dissertation research is to promote state-of-the-art deep learning models in discovering the representation, value and hidden knowledge of GIS and remote sensing data, through three research approaches. The first methodological framework aims to unify varied shadow into limited number of patterns, with the convolutional neural network (CNNs)-powered shape classification, multifarious shadow shapes with a limited number of representative shadow patterns for efficient shadow-based building height estimation. The second research focus integrates semantic analysis into a framework of various state-of-the-art CNNs to support human-level understanding of map content. The final research approach of this dissertation focuses on normalizing geospatial domain knowledge to promote the transferability of a CNN’s model to land-use/land-cover classification. This research reports a method designed to discover detailed land-use/land-cover types that might be challenging for a state-of-the-art CNN’s model that previously performed well on land-cover classification only.Dissertation/ThesisDoctoral Dissertation Geography 201

Derivation of population distribution for vulnerability assessment in flood-prone German cities using multisensoral remote sensing data

Against the background of massive urban development, area-wide and up-to-date spatial information is in demand. However, for many reasons this detailed information on the entire urban area is often not available or just not valid anymore. In the event of a natural hazard – e.g. a river flood – it is a crucial piece of information for relief units to have knowledge about the quantity and the distribution of the affected population. In this paper we demonstrate the abilities of remotely sensed data towards vulnerability assessment or disaster management in case of such an event. By means of very high resolution optical satellite imagery and surface information derived by airborne laser scanning, we generate a precise, three-dimensional representation of the landcover and the urban morphology. An automatic, object-oriented approach detects single buildings and derives morphological information – e.g. building size, height and shape – for a further classification of each building into various building types. Subsequently, a top-down approach is applied to distribute the total population of the city or the district on each individual building. In combination with information of potentially affected areas, the methodology is applied on two German cities to estimate potentially affected population with a high level of accurac

Automated Building Information Extraction and Evaluation from High-resolution Remotely Sensed Data

The two-dimensional (2D) footprints and three-dimensional (3D) structures of buildings are of great importance to city planning, natural disaster management, and virtual environmental simulation. As traditional manual methodologies for collecting 2D and 3D building information are often both time consuming and costly, automated methods are required for efficient large area mapping. It is challenging to extract building information from remotely sensed data, considering the complex nature of urban environments and their associated intricate building structures. Most 2D evaluation methods are focused on classification accuracy, while other dimensions of extraction accuracy are ignored. To assess 2D building extraction methods, a multi-criteria evaluation system has been designed. The proposed system consists of matched rate, shape similarity, and positional accuracy. Experimentation with four methods demonstrates that the proposed multi-criteria system is more comprehensive and effective, in comparison with traditional accuracy assessment metrics. Building height is critical for building 3D structure extraction. As data sources for height estimation, digital surface models (DSMs) that are derived from stereo images using existing software typically provide low accuracy results in terms of rooftop elevations. Therefore, a new image matching method is proposed by adding building footprint maps as constraints. Validation demonstrates that the proposed matching method can estimate building rooftop elevation with one third of the error encountered when using current commercial software. With an ideal input DSM, building height can be estimated by the elevation contrast inside and outside a building footprint. However, occlusions and shadows cause indistinct building edges in the DSMs generated from stereo images. Therefore, a “building-ground elevation difference model” (EDM) has been designed, which describes the trend of the elevation difference between a building and its neighbours, in order to find elevation values at bare ground. Experiments using this novel approach report that estimated building height with 1.5m residual, which out-performs conventional filtering methods. Finally, 3D buildings are digitally reconstructed and evaluated. Current 3D evaluation methods did not present the difference between 2D and 3D evaluation methods well; traditionally, wall accuracy is ignored. To address these problems, this thesis designs an evaluation system with three components: volume, surface, and point. As such, the resultant multi-criteria system provides an improved evaluation method for building reconstruction

Fusion of Interferometric SAR and Photogrammetric Elevation Data

Neurology & clinical neurophysiolog

Object-based Urban Building Footprint Extraction and 3D Building Reconstruction from Airborne LiDAR Data

Buildings play an essential role in urban intra-construction, urban planning, climate studies and disaster management. The precise knowledge of buildings not only serves as a primary source for interpreting complex urban characteristics, but also provides decision makers with more realistic and multidimensional scenarios for urban management. In this thesis, the 2D extraction and 3D reconstruction methods are proposed to map and visualize urban buildings. Chapter 2 presents an object-based method for extraction of building footprints using LiDAR derived NDTI (Normalized Difference Tree Index) and intensity data. The overall accuracy of 94.0% and commission error of 6.3% in building extraction is achieved with the Kappa of 0.84. Chapter 3 presents a GIS-based 3D building reconstruction method. The results indicate that the method is effective for generating 3D building models. The 91.4% completeness of roof plane identification is achieved, and the overall accuracy of the flat and pitched roof plane classification is 88.81%, with the user’s accuracy of the flat roof plane 97.75% and pitched roof plane 100%

Enhanced change detection index for disaster response, recovery assessment and monitoring of buildings and critical facilities-A case study for Muzzaffarabad, Pakistan

The availability of Very High Resolution (VHR) optical sensors and a growing image archive that is frequently updated, allows the use of change detection in post-disaster recovery and monitoring for robust and rapid results. The proposed semi-automated GIS object-based method uses readily available pre-disaster GIS data and adds existing knowledge into the processing to enhance change detection. It also allows targeting specific types of changes pertaining to similar man-made objects such as buildings and critical facilities. The change detection method is based on pre/post normalized index, gradient of intensity, texture and edge similarity filters within the object and a set of training data. More emphasis is put on the building edges to capture the structural damage in quantifying change after disaster. Once the change is quantified, based on training data, the method can be used automatically to detect change in order to observe recovery over time in potentially large areas. Analysis over time can also contribute to obtaining a full picture of the recovery and development after disaster, thereby giving managers a better understanding of productive management and recovery practices. The recovery and monitoring can be analyzed using the index in zones extending from to epicentre of disaster or administrative boundaries over time.EU FP

Advances for Urban Planning in Highly Dynamic Environments through very High-Resolution Remote Sensing Approaches

Die fortschreitende Urbanisierung und der Klimawandel stellen Städte und Stadtplanung vor große Herausforderungen. Der Lebensraum für die Bewohner und die Infrastruktur müssen entsprechend den Klimaschutzanforderungen angepasst werden, zudem muss die Resilienz urbaner Räume gegenüber Klimawandelwandelfolgen erhöht werden. Ziel der urbanen Planung und urbanen Infrastrukturplanung ist vor diesem Hintergrund im Auftrag der Gesellschaft Lösungen zu finden, um diesen Anforderungen der Zukunft gerecht zu werden und um lebenswerte Städte mit allen städtischen Funktionen zu gewährleisten. Zudem müssen durch Planer ökonomische und ökologisch geeignete Vorschläge für die Bereitstellung urbaner Infrastruktur gefunden werden, um Grundbedürfnisse zu erfüllen und Slums zurückzudrängen. Gute Planungspraxis erfordert dafür die Entwicklung von Planungsszenarien für angemessene, erfolgreiche und integrierte Lösungen, wobei eine Datenbasis als Entscheidungsgrundlage dienen muss, die durch Datenkonsistenz, -Qualität und -Aktualität als Evidenz für Szenarienentwicklung herangezogen werden kann. In dieser Dissertationsschrift wird durch drei Studien gezeigt, dass die Disziplin der Fernerkundung durch die Verwendung sehr hochaufgelöster Erdbeobachtungsdaten einen Beitrag für erfolgreiche urbane Planung und urbane Infrastrukturplanung leisten kann, indem der Informationsgehalt bisheriger Fernerkundungsansätze unter Verwendung anwendungsfreundlicher Ansätze erhöht werden kann und direkt planungsrelevante Informationen als Evidenz für die Entscheidungsfindung bereitgestellt werden kann. In den hochdynamischen Städten Da Nang (VN) und Belmopan (BZ) konnte an dieser Thematik gearbeitet werden. Durch die Differenzierung photogrammetrisch abgeleiteter Höhenmodelle in sehr hoher Auflösung wurden in Da Nang anstatt flächenhafter Änderungen urbaner Gebiete Dynamiken innerhalb des Gebäudebestands bestimmt und evaluiert. Der Gebäudetyp kann, wie in Belmopan gezeigt, als geeignetes Mittel für Abschätzung sozio-ökonomischer Indikatoren dienen, die in Zusammenhang mit spezifischen Verbräuchen stehen. Mit der Verwendung von Drohnendaten wurde die Bestimmung der Gebäudetypen verbessert und zudem der Zusammenhang zwischen Gebäudetyp und Stromverbrauch gezeigt, wodurch eine Photovoltaikenergie-Bilanzierung auf Einzelgebäudeebene durchgeführt werden konnte