Reconfigurable microstrip antennas with tunable radiation pattern characteristics

Reconfigurable beam antenna systems are capable of changing their radiation characteristics in real time, such as beam direction, beam shape, beamwidth, etc. Such antenna system is desired for various wireless applications because of many reasons among them; it helps to enhance signal strength received from an intended target, mitigates interference, and accommodates sudden changes in traffic demand of wireless networks. It might also help to reduce the deployment cost of wireless networks infrastructures. In this dissertation, designs for reconfigurable beam microstrip antennas with tunable radiation characteristics have been proposed. The method to achieve these designs is the reconfigurable parasitic element (s) of tunable electrical size, placed in close proximity to the driven patch. A tuning mechanism with the aid of Varactor diodes is introduced for the parasitic patch that effectively allows for controlling its electrical size. This (these) reconfigurable parasitic patch (es) is (are) then applied in different fashions to devise several antenna designs with dynamic electronic control over certain radiation specifications. The accomplished antenna designs in the dissertation are: * Circularly polarized (CP) beam scanning antenna, where two elements microstrip Yagi-Uda antenna is used. The first element is a square patch driven with two probe feeds of quadrature phase for CP excitation. The second element is a parasitic square patch with narrow square-shaped slot carved on its surface. The parasitic patch is adjacent to the driven patch with a small separation distance. Four varactor diodes are placed on the middle of each side of the square slot to facilitate tuning of its electrical size. The parasitic patch electrical size is alloto be effectively tuned by varying the applied reverse biasing DC voltage to the varactors (capacitance value). The CP beam direction is scanned from -36° to 32° with gain variation from 5.7 to 8.2 dBic, and efficiency from 54% to 75.58% along the scanning range. * Two-dimensional beam scanning antenna, where two orthogonal crossed Yagi-Uda antenna configuration is utilized. The driven element is a square patch excited with a probe coaxial feed. The other two parasitic patches are closely placed along the E & H planes of the driven patch. Each parasitic patch has a narrow rectangular slit at its center, where a varactor diode is placed to allow for tuning its electrical size. The beam direction is permitted to be scanned in both the elevation and azimuth planes. The achieved scan range in the elevation plane is from 0° to 32°, whereas in azimuth plan is from 0° to 90°. Along the scanning range, the attained gain changes from 8.1 to 8.9 dBi, and efficiency changes from 86% to 93%. * Tunable beamwidth antenna, with a dynamic control over the radiation beam focusing is proposed. The antenna consists of a square patch excited by a coaxial probe feed, and other two square parasitic patches placed on both sides of the driven along its H-plane. Each parasitic patch has a narrow slit at its center loaded with lumped varactor diode to tune its electrical size. Upon changing the parasitic patches size, the antenna effective aperture is altered, and hence the beamwidth in the H-plane is controlled. The achieved beamwidth tuning range is from 52° to 108°, whereas the gain changes from 6.5 to 8.1 dBi. Throughout the dissertation, 2.45 GHz is chosen, as an example, to be the target frequency. All the designs are validated through experimental measurements for fabricated prototypes, and good agreement is observed between the predicted and measured results

Multiple Slot Fractal Structured Antenna for Wi-Fi and Radio Altimeter for uncertain Applications

A multiple slot fractal antenna design has been determined communication efficiency and its multi-function activities.  High-speed small communication devices have been required for future smart chip applications, so that researchers have been employed new and creative antenna design. Antennas are key part in communication systems, those are used to improve communication parameters like gain, efficiency, and bandwidth. Consistently, modern antennas design with high bandwidth and gain balancing is very difficult, therefore an adaptive antenna array chip design is required. In this research work a coaxial fed antenna with fractal geometry design has been implemented for Wi-Fi and Radio altimeter application. The fractal geometry has been taken with multiple numbers of slots in the radiating structure for uncertain applications. The coaxial feeding location has been selected based on the good impedance matching condition (50 Ohms). The overall dimension mentioned for antenna are approximately 50X50X1.6 mm on FR4 substrate and performance characteristic analysis is performed with change in substrate material presented in this work. Dual-band resonant frequency is being emitted by the antenna with resonance at 3.1 and 4.3 GHz for FR4 substrate material and change in the resonant bands is obtained with change in substrate. The proposed Antenna is prototyped on Anritsu VNA tool and presented the comparative analysis like VSWR 12%, reflection coefficient 9.4%,3D-Gain 6.2% and surface current 9.3% had been improved

Two dimensional switched beam antenna at 28 GHz for fifth generation wireless system

Fifth generation (5G) wireless system is expected to enable new device-to-device (D2D) and machine-to-machine (M2M) applications that will impact both consumers and industry. Moreover, for efficient M2M communication, both one dimensional (1-D) and two dimensional (2-D) beam switching is highly needed for high data-rate wireless radio links. A planar array with 2-D beam switching capabilities is highly desirable in 5G system. This thesis proposes a new technique of achieving simple and cost effective 2-D beam switching array antenna at 28 GHz for 5G wireless system. The technique involves lateral cascading of Butler matrix (BM) beamforming network (BFN). However, designing a planar BM at 28 GHz that will allow K-connector is not a trivial issue because the distances between the ports are X/4 electrical length apart. Nevertheless, two branch line coupler (BLC) with unequal ports separation at 28 GHz on a single substrate are designed and applied to design 1-D switched beam antennas based on BLC and 4 * 4 BM. Then two of these antennas are laterally cascaded to achieve 2-D beam switching antenna. This novel concept is the basis for choosing BM BFN in the design. The proposed 1-D array antennas on BLC and BM have wide measured impedance bandwidth of 18.9% (5.3 GHz) and 21.7% (6.1 GHz) and highest gain of 14.6 dBi and 15.9 dBi, respectively. The 2-D switched beam antenna on cascaded BLC has highest realized gain of 14.9 dB, radiation efficiency of 86%, 86.8%, 85.5%, and 83.4% at ports 1 to 4, respectively. The switching range of from -25o to +18° in the x-z plane and from -18o to 24o in the y-z plane, while the 2-D switched beam antenna based on cascaded 4 * 4 BM has switching range of -41o to 43o in the x-z plane and -43o to 42o in the y-z plane with highest realized gain of 14.4 dBi. The proposed antennas have great potentials for 5G wireless communication system applications

A novel frequency reconfigurable antenna for smart grid applications in TV white space band

This paper presents the design and analysis of a frequency reconfigurable, aperture coupled rectangular patch antenna for use in smart grid applications in TV white space bands. The proposed antenna model has been realized on multi-substrate layers of Polylactic acid (PLA) material (εr=2.65, tanδ=0.003) with a ground plane sandwiched in between them. An aperture has been made in the ground plane for coupling energy to the patch. The overall system dimensions are 270×270 mm. The feature of frequency reconfigurability has been achieved by incorporating a switch and varying the reactance of the feed line on the bottom substrate. A rectangular slot on the long feed line improves impedance matching. The ON and OFF states of the switch provide two operating frequency bands namely 630.13 to 636.7 MHz and 619.16 to 625.3 MHz respectively. The proposed aperture coupled reconfigurable system operates with a maximum gain of 6.4 dB and average efficiency of 78.5% in both bands. The measured results are satisfactory and the proposed antenna will be suitable for operation in the smart grid environment

Multi-Functional Reconfigurable Antenna Development by Multi-Objective Optimization

This dissertation work builds upon the theoretical and experimental studies of radio frequency micro- and nano-electromechanical systems (RF M/NEMS) integrated multifunctional reconfigurable antennas (MRAs). This work focuses on three MRAs with an emphasis on a wireless local area network (WLAN), 5-6 GHz, beam tilt, and polarization reconfigurable parasitic layer-based MRA with inset micro-strip feed. The other two antennas are an X band (8-12 GHz) beam steering MRA with aperture-coupled micro-strip fed and wireless personal area network (WPAN), 60 GHz, inset micro-strip fed MRA for dual frequency and dual polarization operations. For the WLAN (5-6 GHz) MRA, a detailed description of the design methodology, which is based on the joint utilization of electromagnetic (EM) full-wave analysis and multi-objective genetic algorithm, and fundamental theoretical background of parasitic layer-based antennas are given. Various prototypes of this MRA have been fabricated and measured. The measured and simulated results for both impedance and radiation characteristics are given. The work on the MRAs operating in the X band and 60 GHz region focuses on the theoretical aspects of the designs. Different than the WLAN MRA, which uses inset fed structure, the aperture-coupled feed mechanism has been investigated with the goal of improving the bandwidth and beam-tilt capabilities of these MRAs. The simulated results are provided and the working mechanisms are described. The results show that the aperture-coupled feed mechanism is advantageous both in terms of enhanced bandwidth and beam-steering capabilities. Finally, this dissertation work concludes with plans for future work, which will build upon the findings and the results presented herein

Integration of Antennas and Solar cells for Low Power Wireless Systems

This thesis reports on design methods for enhanced integration of low-profile antennas for short-range wireless communications with solar voltaic systems. The need to transform to more sustainable energy sources arises from the excessive production of harmful carbon emissions from fossil fuels. The Internet of Things and the proliferation of battery powered devices makes energy harvesting from the environment more desirable in order to reduce dependency on the power grid and running costs. While photovoltaic powering is opportune due to immense levels of available solar power, the separate area requirements for the antenna and the photovoltaic surfaces presents an opportunity to significantly minimize the unit volume and to enable portable deployment. The focus is on issues of integrating antennas and transmission lines above crystalline silicon solar cells, in particular, the relative orientations are complicated by a-symmetric lattice of the solar cell. A solution to minimise orientation sensitivity was provided and utilised to successfully isolate a microstrip transmission line from the solar lattice, thereby allowing four antenna configurations to be demonstrated. Further work on crystalline solar cells demonstrated their use alongside circularly polarised antennas for aerial vehicles. Wireless energy harvesting over a wide frequency range was demonstrated with an a-Si solar Vivaldi antenna. A dye-sensitised solar dipole antenna was developed for low power indoor applications. The approaches established the engineering capacity to reduce the device size and weight through integration of the radio and the solar cell technologies. In addition, the use of different solar cell technologies demonstrated the importance of selecting the cell type most suited to the intended application

Integrated Filtering Antennas for Wireless Communications

In traditional radio frequency (RF) front-end subsystems, the passive components, such as antennas, filters, power dividers and duplexers, are separately designed and cascaded via the 50 ? interfaces. This traditional approach results in a bulky and heavy RF front-end subsystem, and suffers from compromised efficiency due to the losses in the interconnections and the mismatching problems between different components. The frequency responses of the antennas such as the frequency selectivity and bandwidth are usually degraded, especially for microstrip antennas. To improve the frequency responses and reduce the size of RF front ends, it is important to investigate novel highly integrated antennas which exhibit multiple functions such as radiation, filtering, power dividing and combining or duplexing, simultaneously. In this thesis, several innovative designs of compact, multi-functional integrated an-tennas/arrays are proposed for wireless communication applications. First, new methods of designing integrated filtering antenna elements with broadband or dual-band performance are investigated. These antennas also feature high frequency selectivity and wideband harmonic suppression. Based on these studies, several integrated filtering array antennas with improved gains and frequency responses are developed for the first time. Compared with traditional array antennas, these proposed antennas exhibit improved bandwidths, out-of-band rejection and wideband harmonic suppression. The application of the filtering antennas in millimeter-wave (mm-Wave) frequency band is also investigated as it can potentially reduce the cost of the mm-Wave front-end subsystems significantly while providing the improved impedance bandwidth. The integrated design techniques are further developed to design novel dual-port highly integrated antennas with filtering and duplexing functions integrated. Such a new concept and the prototypes could find poten-tial applications in wireless communication systems and intelligent transportation system (ITS). In this thesis, comprehensive design methodologies and synthesis methods are provid-ed to guide the design of the integrated filtering antennas. The performance is evaluated with the help of full-wave electromagnetics (EM) simulations. All of the prototypes are fabricated and tested for validating the design concepts. Good agreement between the simulation and measurement results is achieved, demonstrating the integrated antennas have the advantages of compact size, flat gain performance, low losses and excellent harmonic suppression performance. These researches are important for modern wireless communication systems

Overview on Multipattern and Multipolarization Antennas for Aerospace and Terrestrial Applications

In recent years, reconfigurable antennas, with the ability to radiate wave in more than one pattern and polarization, play a great role in modern telecommunication systems. Compared with conventional antennas, multipattern and multipolarization antennas have more advantages and better prospects. They can be used to improve system gain and security, satisfy system requirements, avoid noisy environment, and adapt to the environment flexibly. This paper discusses different patterns and polarizations of reconfigurable antennas according to current research work in this area. In the opinion of this paper, the radiation pattern states of antennas include beam direction, shape, and gain. The polarization states of antennas include horizontal/vertical linear, ±slant 45° linear, left-hand or right-hand circular polarized. Different multipattern and multipolarization antennas with various structures and working mechanisms are compared and discussed. Multipattern and multipolarization antennas have been well applied for aerospace and terrestrial applications, such as dynamic scenarios, adaptive beam scanning, and multiple-input-multiple-output (MIMO) systems

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance