Development of a Computer Vision-Based Three-Dimensional Reconstruction Method for Volume-Change Measurement of Unsaturated Soils during Triaxial Testing

Problems associated with unsaturated soils are ubiquitous in the U.S., where expansive and collapsible soils are some of the most widely distributed and costly geologic hazards. Solving these widespread geohazards requires a fundamental understanding of the constitutive behavior of unsaturated soils. In the past six decades, the suction-controlled triaxial test has been established as a standard approach to characterizing constitutive behavior for unsaturated soils. However, this type of test requires costly test equipment and time-consuming testing processes. To overcome these limitations, a photogrammetry-based method has been developed recently to measure the global and localized volume-changes of unsaturated soils during triaxial test. However, this method relies on software to detect coded targets, which often requires tedious manual correction of incorrectly coded target detection information. To address the limitation of the photogrammetry-based method, this study developed a photogrammetric computer vision-based approach for automatic target recognition and 3D reconstruction for volume-changes measurement of unsaturated soils in triaxial tests. Deep learning method was used to improve the accuracy and efficiency of coded target recognition. A photogrammetric computer vision method and ray tracing technique were then developed and validated to reconstruct the three-dimensional models of soil specimen

Fisheye Photogrammetry to Survey Narrow Spaces in Architecture and a Hypogea Environment

Nowadays, the increasing computation power of commercial grade processors has actively led to a vast spreading of image-based reconstruction software as well as its application in different disciplines. As a result, new frontiers regarding the use of photogrammetry in a vast range of investigation activities are being explored. This paper investigates the implementation of fisheye lenses in non-classical survey activities along with the related problematics. Fisheye lenses are outstanding because of their large field of view. This characteristic alone can be a game changer in reducing the amount of data required, thus speeding up the photogrammetric process when needed. Although they come at a cost, field of view (FOV), speed and manoeuvrability are key to the success of those optics as shown by two of the presented case studies: the survey of a very narrow spiral staircase located in the Duomo di Milano and the survey of a very narrow hypogea structure in Rome. A third case study, which deals with low-cost sensors, shows the metric evaluation of a commercial spherical camera equipped with fisheye lenses

Affine multi-view modelling for close range object measurement

In photogrammetry, sensor modelling with 3D point estimation is a fundamental topic of research. Perspective frame cameras offer the mathematical basis for close range modelling approaches. The norm is to employ robust bundle adjustments for simultaneous parameter estimation and 3D object measurement. In 2D to 3D modelling strategies image resolution, scale, sampling and geometric distortion are prior factors. Non-conventional image geometries that implement uncalibrated cameras are established in computer vision approaches; these aim for fast solutions at the expense of precision. The projective camera is defined in homogeneous terms and linear algorithms are employed. An attractive sensor model disembodied from projective distortions is the affine. Affine modelling has been studied in the contexts of geometry recovery, feature detection and texturing in vision, however multi-view approaches for precise object measurement are not yet widely available. This project investigates affine multi-view modelling from a photogrammetric standpoint. A new affine bundle adjustment system has been developed for point-based data observed in close range image networks. The system allows calibration, orientation and 3D point estimation. It is processed as a least squares solution with high redundancy providing statistical analysis. Starting values are recovered from a combination of implicit perspective and explicit affine approaches. System development focuses on retrieval of orientation parameters, 3D point coordinates and internal calibration with definition of system datum, sensor scale and radial lens distortion. Algorithm development is supported with method description by simulation. Initialization and implementation are evaluated with the statistical indicators, algorithm convergence and correlation of parameters. Object space is assessed with evaluation of the 3D point correlation coefficients and error ellipsoids. Sensor scale is checked with comparison of camera systems utilizing quality and accuracy metrics. For independent method evaluation, testing is implemented over a perspective bundle adjustment tool with similar indicators. Test datasets are initialized from precise reference image networks. Real affine image networks are acquired with an optical system (~1M pixel CCD cameras with 0.16x telecentric lens). Analysis of tests ascertains that the affine method results in an RMS image misclosure at a sub-pixel level and precisions of a few tenths of microns in object space

Progress in industrial photogrammetry by means of markerless solutions

174 p.La siguiente tesis está enfocada al desarrollo y uso avanzado de metodologías fotogramétrica sin dianas en aplicaciones industriales. La fotogrametría es una técnica de medición óptica 3D que engloba múltiples configuraciones y aproximaciones. En este estudio se han desarrollado procedimientos de medición, modelos y estrategias de procesamiento de imagen que van más allá que la fotogrametría convencional y buscan el emplear soluciones de otros campos de la visión artificial en aplicaciones industriales. Mientras que la fotogrametría industrial requiere emplear dianas artificiales para definir los puntos o elementos de interés, esta tesis contempla la reducción e incluso la eliminación de las dianas tanto pasivas como activas como alternativas prácticas. La mayoría de los sistemas de medida utilizan las dianas tanto para definir los puntos de control, relacionar las distintas perspectivas, obtener precisión, así como para automatizar las medidas. Aunque en muchas situaciones el empleo de dianas no sea restrictivo existen aplicaciones industriales donde su empleo condiciona y restringe considerablemente los procedimientos de medida empleados en la inspección. Un claro ejemplo es la verificación y control de calidad de piezas seriadas, o la medición y seguimiento de elementos prismáticos relacionados con un sistema de referencia determinado. Es en este punto donde la fotogrametría sin dianas puede combinarse o complementarse con soluciones tradicionales para tratar de mejorar las prestaciones actuales

Optimised multi-camera systems for dimensional control in factory environments

As part of the United Kingdom’s Light Controlled Factory project, University College London aims to develop a large-scale multi-camera system for dimensional control tasks in manufacturing, such as part assembly and tracking. Accuracy requirements in manufacturing are demanding, and improvements in the modelling and analysis of both camera imaging and the measurement environment are essential. A major aspect to improved camera modelling is the use of monochromatic imaging of retro-reflective target points, together with a camera model designed for a particular illumination wavelength. A small-scale system for laboratory testing has been constructed using eight low-cost monochrome cameras with C-mount lenses on a rigid metal framework. Red, green and blue monochromatic light-emitting diode ring illumination has been tested, with a broadband white illumination for comparison. Potentially, accuracy may be further enhanced by the reduction in refraction errors caused by a non-homogeneous factory environment, typically manifest in varying temperatures in the workspace. A refraction modelling tool under development in the parallel European Union LUMINAR project is being used to simulate refraction in order to test methods which may be able to reduce or eliminate this effect in practice

Underwater photogrammetry for 3D modeling of floating objects: The case study of a 19-foot motor boat

3D modeling of floating or semi-submerged objects is a challenging and attractive task for the marine industry especially if the manufacturing of components that have to be replaced or repaired after a damage is necessary or the ship itself has to be converted. Up to now the 3D reverse engineering of ships has required docking operations to carry out a geodetic or photogrammetric survey with high costs for shipowners. In this paper an innovative 3D acquisition method for digital recording of floating objects is presented. The method is based on digital photogrammetry both underwater and terrestrial. Preliminary tests are presented for the case study of a 19-foot motor boat. Two surveys of the boat in floating conditions are carried out and then joined by means of special rigid orientation devices built ad hoc

Self-calibration technique for on-machine spindle-mounted vision systems

On-machine measuring (OMM) systems are being more and more applied in machine tools in order to measure workpieces on the machine itself. Many of these systems are directly mounted in the machine spindle, so the measuring uncertainty is affected by clamping positioning and orientation variations, especially when integrating optical systems based on machine vision. This paper presents a self-calibration technique for vision systems by using redundant information of on machine measurements, avoiding extra mechanical anchoring or calibration means. It has been applied to a vision system with the angular placement uncertainty of a tool holder coupling being the main uncertainty contributor. A milling machine pilot case has been selected for demonstration, showing an effective self-calibration capability both in laboratory and industrial conditions

Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery

One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions