On variability and reliability of poly-Si thin-film transistors

In contrast to conventional bulk-silicon technology, polysilicon (poly-Si) thin-film transistors (TFTs) can be implanted in flexible substrate and can have low process temperature. These attributes make poly-Si TFT technology more attractive for new applications, such as flexible displays, biosensors, and smart clothing. However, due to the random nature of grain boundaries (GBs) in poly-Si film and self-heating enhanced negative bias temperature instability (NBTI), the variability and reliability of poly-Si TFTs are the main obstacles that impede the application of poly-Si TFTs in high-performance circuits. The primary focus of this dissertation is to develop new design methodologies and modeling techniques for facilitating new applications of poly-Si TFT technology. In order to do that, a physical model is first presented to characterize the GB-induced transistor threshold voltage (V th)variations considering not only the number but also the position and orientation of each GB in 3-D space. The fast computation time of the proposed model makes it suitable for evaluation of GB-induced transistor Vthvariation in the early design phase. Furthermore, a self-consistent electro-thermal model that considers the effects of device geometry, substrate material, and stress conditions on NBTI is proposed. With the proposed modeling methodology, the significant impacts of device geometry, substrate, and supply voltage on NBTI in poly-Si TFTs are shown. From a circuit design perspective, a voltage programming pixel circuit is developed for active-matrix organic light emitting diode (AMOLED) displays for compensating the shift of Vth and mobility in driver TFTs as well as compensating the supply voltage degradation. In addition, a self-repair design methodology is proposed to compensate the GB-induced variations for liquid crystal displays (LCDs) and AMOLED displays. Based on the simulation results, the proposed circuit can decrease the required supply voltage by 20% without performance and yield degradation. In the final section of this dissertation, an optimization methodology for circuit-level reliability tests is explored. To effectively predict circuit lifetime, accelerated aging (i.e. elevated voltage and temperature) is commonly applied in circuit-level reliability tests, such as constant voltage stress (CVS) and ramp voltage stress (RVS) tests. However, due to the accelerated aging, shifting of dominant degradation mechanism might occur leading to the wrong lifetime prediction. To get around this issue, we proposed a technique to determine the proper stress range for accelerated aging tests

Negative Bias Temperature Instability (NBTI) Monitoring and Mitigation Technique for MOSFET

修士論

NEGATIVE BIAS TEMPERATURE INSTABILITY STUDIES FOR ANALOG SOC CIRCUITS

Negative Bias Temperature Instability (NBTI) is one of the recent reliability issues in sub threshold CMOS circuits. NBTI effect on analog circuits, which require matched device pairs and mismatches, will cause circuit failure. This work is to assess the NBTI effect considering the voltage and the temperature variations. It also provides a working knowledge of NBTI awareness to the circuit design community for reliable design of the SOC analog circuit. There have been numerous studies to date on the NBTI effect to analog circuits. However, other researchers did not study the implication of NBTI stress on analog circuits utilizing bandgap reference circuit. The reliability performance of all matched pair circuits, particularly the bandgap reference, is at the mercy of aging differential. Reliability simulation is mandatory to obtain realistic risk evaluation for circuit design reliability qualification. It is applicable to all circuit aging problems covering both analog and digital. Failure rate varies as a function of voltage and temperature. It is shown that PMOS is the reliabilitysusceptible device and NBTI is the most vital failure mechanism for analog circuit in sub-micrometer CMOS technology. This study provides a complete reliability simulation analysis of the on-die Thermal Sensor and the Digital Analog Converter (DAC) circuits and analyzes the effect of NBTI using reliability simulation tool. In order to check out the robustness of the NBTI-induced SOC circuit design, a bum-in experiment was conducted on the DAC circuits. The NBTI degradation observed in the reliability simulation analysis has given a clue that under a severe stress condition, a massive voltage threshold mismatch of beyond the 2mV limit was recorded. Bum-in experimental result on DAC proves the reliability sensitivity of NBTI to the DAC circuitry

Accelerated Aging in Devices and Circuits

abstract: The aging mechanism in devices is prone to uncertainties due to dynamic stress conditions. In AMS circuits these can lead to momentary fluctuations in circuit voltage that may be missed by a compact model and hence cause unpredictable failure. Firstly, multiple aging effects in the devices may have underlying correlations. The generation of new traps during TDDB may significantly accelerate BTI, since these traps are close to the dielectric-Si interface in scaled technology. Secondly, the prevalent reliability analysis lacks a direct validation of the lifetime of devices and circuits. The aging mechanism of BTI causes gradual degradation of the device leading to threshold voltage shift and increasing the failure rate. In the 28nm HKMG technology, contribution of BTI to NMOS degradation has become significant at high temperature as compared to Channel Hot Carrier (CHC). This requires revising the End of Lifetime (EOL) calculation based on contribution from induvial aging effects especially in feedback loops. Conventionally, aging in devices is extrapolated from a short-term measurement, but this practice results in unreliable prediction of EOL caused by variability in initial parameters and stress conditions. To mitigate the extrapolation issues and improve predictability, this work aims at providing a new approach to test the device to EOL in a fast and controllable manner. The contributions of this thesis include: (1) based on stochastic trapping/de-trapping mechanism, new compact BTI models are developed and verified with 14nm FinFET and 28nm HKMG data. Moreover, these models are implemented into circuit simulation, illustrating a significant increase in failure rate due to accelerated BTI, (2) developing a model to predict accelerated aging under special conditions like feedback loops and stacked inverters, (3) introducing a feedback loop based test methodology called Adaptive Accelerated Aging (AAA) that can generate accurate aging data till EOL, (4) presenting simulation and experimental data for the models and providing test setup for multiple stress conditions, including those for achieving EOL in 1 hour device as well as ring oscillator (RO) circuit for validation of the proposed methodology, and (5) scaling these models for finding a guard band for VLSI design circuits that can provide realistic aging impact.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation