Self-Reconfigurable Analog Arrays: Off-The Shelf Adaptive Electronics for Space Applications

Development of analog electronic solutions for space avionics is expensive and lengthy. Lack of flexible analog devices, counterparts to digital Field Programmable Gate Arrays (FPGA), prevents analog designers from benefits of rapid prototyping. This forces them to expensive and lengthy custom design, fabrication, and qualification of application specific integrated circuits (ASIC). The limitations come from two directions: commercial Field Programmable Analog Arrays (FPAA) have limited variability in the components offered on-chip; and they are only qualified for best case scenarios for military grade (-55C to +125C). In order to avoid huge overheads, there is a growing trend towards avoiding thermal and radiation protection by developing extreme environment electronics, which maintain correct operation while exposed to temperature extremes (-180degC to +125degC). This paper describes a recent FPAA design, the Self-Reconfigurable Analog Array (SRAA) developed at JPL. It overcomes both limitations, offering a variety of analog cells inside the array together with the possibility of self-correction at extreme temperatures

Spiers Memorial Lecture: Molecular mechanics and molecular electronics

We describe our research into building integrated molecular electronics circuitry for a diverse set of functions, and with a focus on the fundamental scientific issues that surround this project. In particular, we discuss experiments aimed at understanding the function of bistable [2]rotaxane molecular electronic switches by correlating the switching kinetics and ground state thermodynamic properties of those switches in various environments, ranging from the solution phase to a Langmuir monolayer of the switching molecules sandwiched between two electrodes. We discuss various devices, low bit-density memory circuits, and ultra-high density memory circuits that utilize the electrochemical switching characteristics of these molecules in conjunction with novel patterning methods. We also discuss interconnect schemes that are capable of bridging the micrometre to submicrometre length scales of conventional patterning approaches to the near-molecular length scales of the ultra-dense memory circuits. Finally, we discuss some of the challenges associated with fabricated ultra-dense molecular electronic integrated circuits

Challenging the evolutionary strategy for synthesis of analogue computational circuits

There are very few reports in the past on applications of Evolutionary Strategy (ES) towards the synthesis of analogue circuits. Moreover, even fewer reports are on the synthesis of computational circuits. Last fact is mainly due to the dif-ficulty in designing of the complex nonlinear functions that these circuits perform. In this paper, the evolving power of the ES is challenged to design four computational circuits: cube root, cubing, square root and squaring functions. The synthesis succeeded due to the usage of oscillating length genotype strategy and the substructure reuse. The approach is characterized by its simplicity and represents one of the first attempts of application of ES towards the synthesis of “QR” circuits. The obtained experimental results significantly exceed the results published before in terms of the circuit quality, economy in components and computing resources utilized, revealing the great potential of the technique pro-posed to design large scale analog circuits

Design analysis of levitation facility for space processing applications

Containerless processing facilities for the space laboratory and space shuttle are defined. Materials process examples representative of the most severe requirements for the facility in terms of electrical power, radio frequency equipment, and the use of an auxiliary electron beam heater were used to discuss matters having the greatest effect upon the space shuttle pallet payload interfaces and envelopes. Improved weight, volume, and efficiency estimates for the RF generating equipment were derived. Results are particularly significant because of the reduced requirements for heat rejection from electrical equipment, one of the principal envelope problems for shuttle pallet payloads. It is shown that although experiments on containerless melting of high temperature refractory materials make it desirable to consider the highest peak powers which can be made available on the pallet, total energy requirements are kept relatively low by the very fast processing times typical of containerless experiments and allows consideration of heat rejection capabilities lower than peak power demand if energy storage in system heat capacitances is considered. Batteries are considered to avoid a requirement for fuel cells capable of furnishing this brief peak power demand

Part 3: Systemic risk in ecology and engineering

The Federal Reserve Bank of New York released a report -- New Directions for Understanding Systemic Risk -- that presents key findings from a cross-disciplinary conference that it cosponsored in May 2006 with the National Academy of Sciences' Board on Mathematical Sciences and Their Applications. ; The pace of financial innovation over the past decade has increased the complexity and interconnectedness of the financial system. This development is important to central banks, such as the Federal Reserve, because of their traditional role in addressing systemic risks to the financial system. ; To encourage innovative thinking about systemic issues, the New York Fed partnered with the National Academy of Sciences to bring together more than 100 experts on systemic risk from 22 countries to compare cross-disciplinary perspectives on monitoring, addressing and preventing this type of risk. ; This report, released as part of the Bank's Economic Policy Review series, outlines some of the key points concerning systemic risk made by the various disciplines represented - including economic research, ecology, physics and engineering - as well as presentations on market-oriented models of financial crises, and systemic risk in the payments system and the interbank funds market. The report concludes with observations gathered from the sessions and a discussion of potential applications to policy. ; The three papers presented in this conference session highlighted the positive feedback effects that produce herdlike behavior in markets, and the subsequent discussion focused in part on means of encouraging heterogeneous investment strategies to counter such behavior. Participants in the session also discussed the types of models used to study systemic risk and commented on the challenges and trade-offs researchers face in developing their models.Financial risk management ; Financial markets ; Financial stability ; Financial crises

Quantum memories based on engineered dissipation

Storing quantum information for long times without disruptions is a major requirement for most quantum information technologies. A very appealing approach is to use self-correcting Hamiltonians, i.e. tailoring local interactions among the qubits such that when the system is weakly coupled to a cold bath the thermalization process takes a long time. Here we propose an alternative but more powerful approach in which the coupling to a bath is engineered, so that dissipation protects the encoded qubit against more general kinds of errors. We show that the method can be implemented locally in four dimensional lattice geometries by means of a toric code, and propose a simple 2D set-up for proof of principle experiments.Comment: 6 +8 pages, 4 figures, Includes minor corrections updated references and aknowledgement

NASA Contributions to Development of Special-Purpose Thermocouples. A Survey

The thermocouple has been used for measuring temperatures for more than a century, but new materials, probe designs, and techniques are continually being developed. Numerous contributions have been made by the National Aeronautics and Space Administration and its contractors in the aerospace program. These contributions have been collected by Midwest Research Institute and reported in this publication to enable American industrial engineers to study them and adapt them to their own problem areas. Potential applications are suggested to stimulate ideas on how these contributions can be used