40 research outputs found
A wave pipeline-based WCDMA multipath searcher for a high speed operation
The multiplexing technique of the Wideband-Code Division Multiple Access (WCDMA) is widely applied in the third generation (3G) of cellular systems. The WCDMA uses scrambling codes to differentiate the mobile terminals. In a channel, multipaths may occur when the transmitted signal is reflected from objects in the receiver's environment, so that multiple copies of the signal arrive at the antenna at different moments. Thus, a wideband signal may suffer frequency selective fading due to the multipath propagations. A Rake receiver is often used to combine the energies received on different paths, and a multipath searcher is needed to identify the multipath components and their associated delays. Correlating some shifted versions of the scrambling code with an incoming signal results in energy peaks at the multipath locations, when the locally generated scrambling sequence is aligned with the scrambling sequence of the incoming signal. A path acquisition in such a process requires a speed of millions of Multiply-Accumulate (MAC) cycles per second. The performances of the multipath searcher are mainly determined by the resolution and the acquisition time, which are often limited by the operation speed of the hardware resources. This thesis presents the design of a multipath searcher with a high resolution and a short acquisition time. The design consists of two aspects. The first aspect is of the searching algorithm. It is based on a double-dwell algorithm and a verification stage is introduced to lower the rate of false alarms. The second aspect in the design is the circuit of the searcher. This circuit is expected to operate at the chip rate of 3.84 MHz and the search period is chosen to be equal to the time interval of 5 slots, which requires a high operation speed of the computation units employed in the circuit. Moreover, in order to reduce the circuit complexity, only one Complex Multiplier-Accumulator (CMAC), instead of several ones in many existing searcher circuits, is employed to perform all the computation tasks without extending the search period, which make the computation time in the circuit more critical. Aiming at this challenge of the high speed requirement, a structure of the CMAC cell is designed with the technique of the wave pipeline, which permits the signal propagation through the circuit stages without constraints of clocks. For a good use of this technique, the circuit blocks are made to have equalized delay, by means of pass transistor logic cells, and by keeping such a delay short, the total computation time of the CMAC can be made within the required time limit of the searching. A complete circuit of the CMAC has been developed. It has two versions, with the Normal Process Complementary Pass Logic (NPCPL) and the Complementary Pass-Logic Transmission-Gates (CPL-TG), respectively. The structures of the arithmetic units have been chosen carefully so that the fan-in/fan-out constraints of the NPCPL and the CPL-TG logics are taken into consideration. The results of the simulation with a 0.18 om models have shown that this wave pipelined CMAC can process four inputs of 8 bits at a rate of 830 Mb/s. In order to evaluate the effectiveness of the searching algorithm, a Matlab simulation of the searcher circuit has been conducted. It has been observed that the proposed multipath searcher can lead to low probabilities of misdetection and false alarm for the test cases recommended by the 3 rd Generation Partnership Project (3GPP) standard. A test chip of the CMAC circuit has been fabricated in a CMOS 0.18 om technology process. The circuit is currently under test
Transmitter based techniques for ISI and MAI mitigation in CDMA-TDD downlink
The third-generation (3G) of mobile communications systems aim to provide enhanced voice,
text and data services to the user. These demands give rise to the complexity and power consumption
of the user equipment (UE) while the objective is smaller, lighter and power efficient
mobiles. This thesis aims to examine ways of reducing the UE receiverâs computational cost
while maintaining a good performance.
One prominent multiple access scheme selected for 3G is code division multiple access. Receiver
based multiuser detection techniques that utilise the knowledge of the downlink channel
by the mobile have been extensively studied in the literature, in order to deal with multiple
access and intersymbol interference. However, these techniques result in high mobile receiver
complexity.
Recently, work has been done on algorithms that transfer the complexity from the UE to the
base station by exploiting the fact that in time division duplex mode the downlink channel can
be known to the transmitter. By linear precoding of the transmitted signal the user equipment
can be simplified to a filter matched to the userâs spreading code. In this thesis the problem
of generic linear precoding is analysed theoretically and a method for analytical calculation
of BER is developed. The most representative of the developed precoding techniques are described
under a common framework, compared and classified as bitwise or blockwise. Bitwise
demonstrate particular advantages in terms of complexity and implementation but lack in performance.
Two novel bitwise algorithms are presented and analysed. They outperform significantly
the existing ones, while maintain a reduced computational cost and realisation simplicity.
The first, named inverse filters, is the Wiener solution of the problem after applying a minimum
mean squared error criterion with power constraints. The second recruits multichannel adaptive
algorithms to achieve the same goal. The base station emulates the actual system in a cell
to converge iteratively to the pre-filters that precode the transmitted signals before transmission.
The advantages and the performance of the proposed techniques, along with a variety of
characteristics are demonstrated by means of Monte Carlo simulations
Identification of Technologies for Provision of Future Aeronautical Communications
This report describes the process, findings, and recommendations of the second of three phases of the Future Communications Study (FCS) technology investigation conducted by NASA Glenn Research Center and ITT Advanced Engineering & Sciences Division for the Federal Aviation Administration (FAA). The FCS is a collaborative research effort between the FAA and Eurocontrol to address frequency congestion and spectrum depletion for safety critical airground communications. The goal of the technology investigation is to identify technologies that can support the longterm aeronautical mobile communication operating concept. A derived set of evaluation criteria traceable to the operating concept document is presented. An adaptation of the analytical hierarchy process is described and recommended for selecting candidates for detailed evaluation. Evaluations of a subset of technologies brought forward from the prescreening process are provided. Five of those are identified as candidates with the highest potential for continental airspace solutions in L-band (P-34, W-CDMA, LDL, B-VHF, and E-TDMA). Additional technologies are identified as best performers in the unique environments of remote/oceanic airspace in the satellite bands (Inmarsat SBB and a custom satellite solution) and the airport flight domain in C-band (802.16e). Details of the evaluation criteria, channel models, and the technology evaluations are provided in appendixes
Mobile and Wireless Communications
Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies
OFDM based air interfaces for future mobile satellite systems
This thesis considers the performance of OFDM in a non-linear satellite channel and mechanisms for overcoming the degradations resulting from the high PAPR in the OFDM signal in the specific satellite architecture. It was motivated by new S-DMB applications but its results are applicable to any OFDM system via satellites. Despite many advantages of OFDM, higher PAPR is a major drawback. OFDM signals are therefore very sensitive to non-linear distortion introduced by the power amplifiers and thus, significantly reduce the power efficiency of the system, which is already crucial to satellite system economics. Simple power amplifier back-off to cope with high OFDM PAPR is not possible. Two transmitter based techniques have been considered: PAPR reduction and amplifier linearization.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Final report on the evaluation of RRM/CRRM algorithms
Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin
Millimetriaaltopohjainen runkoyhteys ultratiheille langattomille verkoille - Itseasentuvien verkkoelementtien analyysi
The amount of wireless traffic and number of connected devices are expected to explode in the coming future. By the year 2020 the amount of data traffic is forecasted to grow 1000 times from 2010 levels and the amount of connected devices is expected to reach 50 billion. One reason to these numbers is massive increase in machine type communications. 5G networks have been envisioned to address these challenges.
In the 5G network concept the networks are getting denser than ever before. Millimeter wave communications play an important role in backhauling of the mobile traffic as deploying optical fiber to every small node is most likely going to be too cost intensive for operators.
Efficient deployment of an ultra-dense wireless network requires that the devices support so called âplug and playâ installation. In practice it means that a mechanic installing a new radio node should only perform physical mounting of the device. Antenna alignment and link setup processes should be fully automated.
The purpose of this thesis is to study practical issues and possible solutions of realizing the plug and play installation in a cost efficient way. This study will define scenarios and functional requirements of adding access nodes to backhaul networks. Technical evaluation of link discovery process and cost analysis on plug and play installation of access nodes are conducted.Tulevaisuudessa langattomien laitteiden mÀÀrÀn ja niiden generoiman liikenteen odotetaan kasvavan rÀjÀhdysmÀisesti. Vuoteen 2020 mennessÀ verkoissa siirrettÀvien datamÀÀrien on ennustettu kasvavan tuhatkertaisiksi vuoden 2010 tasosta, ja liitettyjen laitteiden mÀÀrÀn odotetaan nousevan 50 miljardiin. Yksi syy nÀihin on koneiden vÀlisen viestinnÀn massiivinen kasvu. 5G-verkkoja on kaavailtu vastaamaan edellÀ mainittuihin haasteisiin.
Osana 5G-konseptia verkkojen odotetaan rakentuvan tiheÀmmiksi kuin koskaan aiemmin. Millimetriaaltoihin pohjautuvat linkit tulevat olemaan merkittÀvÀssÀ roolissa mobiilidatan siirtÀmisessÀ radionoodeista runkoverkkoon, koska optisen kuidun rakentaminen jokaiselle pienelle noodille tulisi mitÀ luultavimmin operaattoreille liian kalliiksi.
Ultratiheiden verkkojen tehokas rakentaminen vaatii, ettÀ asennettavat laitteet tukevan niin sanottua itseasennusta. KÀytÀnnössÀ se tarkoittaa sitÀ, ettÀ asentajan tÀytyy ainoastaan suorittaa radionoodin fyysinen asennus. Antenniensuuntaus- ja linkinmuodostusprosessien tulisi olla tÀysin automatisoituja.
TÀmÀn diplomityön tarkoituksena on tutkia kustannustehokkaaseen itseasennukseen liittyviÀ kÀytÀnnön ongelmia sekÀ mahdollisia ratkaisuita. Tutkimus mÀÀrittelee skenaariot ja funktionaaliset vaatimukset radionoodien lisÀÀmiseksi osaksi operaattorin verkkoa. Työ sisÀltÀÀ linkkienmuodostusprosessin teknisen evaluoinnin, sekÀ kustannusanalyysin tiheiden verkkojen rakentamisesta hyödyntÀen itseasennustekniikkaa
Recommended from our members
Integrated Self-Interference Cancellation for Full-Duplex and Frequency-Division Duplexing Wireless Communication Systems
From wirelessly connected robots to car-to-car communications, and to smart cities, almost every aspect of our lives will benefit from future wireless communications. While promise an exciting future world, next-generation wireless communications impose requirements on the data rate, spectral efficiency, and latency (among others) that are higher than those for today's systems by several orders of magnitude.
Full-duplex wireless, an emergent wireless communications paradigm, breaks the long-held assumption that it is impossible for a wireless device to transmit and receive simultaneously at the same frequency, and has the potential to immediately double network capacity at the physical (PHY) layer and offers many other benefits (such as reduced latency) at the higher layers. Recently, discrete-component-based demonstrations have established the feasibility of full-duplex wireless. However, the realization of integrated full duplex radios, compact radios that can fit into smartphones, is fraught with fundamental challenges. In addition, to unleash the full potential of full-duplex communication, a careful redesign of the PHY layer and the medium access control (MAC) layer using a cross-layer approach is required.
The biggest challenge associated with full duplex wireless is the tremendous amount of transmitter self-interference right on top of the desired signal. In this dissertation, new self-interference-cancellation approaches at both system and circuit levels are presented, contributing towards the realization of full-duplex radios using integrated circuit technology. Specifically, these new approaches involve elimination of the noise and distortion of the cancellation circuitry, enhancing the integrated cancellation bandwidth, and performing joint radio frequency, analog, and digital cancellation to achieve cancellation with nearly one part-per-billion accuracy.
In collaboration with researchers at higher layers of the stack, a cross-layer approach has been used in our full-duplex research and has allowed us to derive power allocation algorithms and to characterize rate-gain improvements for full-duplex wireless networks. To enable experimental characterization of full-duplex MAC layer algorithms, a cross-layered software-defined full-duplex radio testbed has been developed. In collaboration with researchers from the field of micro-electro-mechanical systems, we demonstrate a multi-band frequency-division duplexing system using a cavity-filter-based tunable duplexer and our integrated widely-tunable self-interference-cancelling receiver