1,220 research outputs found
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
Compressive Sensing for Spread Spectrum Receivers
With the advent of ubiquitous computing there are two design parameters of
wireless communication devices that become very important power: efficiency and
production cost. Compressive sensing enables the receiver in such devices to
sample below the Shannon-Nyquist sampling rate, which may lead to a decrease in
the two design parameters. This paper investigates the use of Compressive
Sensing (CS) in a general Code Division Multiple Access (CDMA) receiver. We
show that when using spread spectrum codes in the signal domain, the CS
measurement matrix may be simplified. This measurement scheme, named
Compressive Spread Spectrum (CSS), allows for a simple, effective receiver
design. Furthermore, we numerically evaluate the proposed receiver in terms of
bit error rate under different signal to noise ratio conditions and compare it
with other receiver structures. These numerical experiments show that though
the bit error rate performance is degraded by the subsampling in the CS-enabled
receivers, this may be remedied by including quantization in the receiver
model. We also study the computational complexity of the proposed receiver
design under different sparsity and measurement ratios. Our work shows that it
is possible to subsample a CDMA signal using CSS and that in one example the
CSS receiver outperforms the classical receiver.Comment: 11 pages, 11 figures, 1 table, accepted for publication in IEEE
Transactions on Wireless Communication
Analog Network Coding for Multi-User Spread-Spectrum Communication Systems
This work presents another look at an analog network coding scheme for
multi-user spread-spectrum communication systems. Our proposed system combines
coding and cooperation between a relay and users to boost the throughput and to
exploit interference. To this end, each pair of users, and
, that communicate with each other via a relay
shares the same spreading code. The relay has two roles, it synchronizes
network transmissions and it broadcasts the combined signals received from
users. From user 's point of view, the signal is decoded, and
then, the data transmitted by user is recovered by subtracting
user 's own data. We derive the analytical performance of this
system for an additive white Gaussian noise channel with the presence of
multi-user interference, and we confirm its accuracy by simulation.Comment: 6 pages, 2 figures, to appear at IEEE WCNC'1
A comparison of digital transmission techniques under multichannel conditions at 2.4 GHz in the ISM BAND
In order to meet the observation quality criteria of micro-UAVs, and particularly in the context of the « Trophée Micro-Drones », ISAE/SUPAERO is studying technical solutions to transmit a high data rate from a video payload onboard a micro-UAV. The laboratory has to consider the impact of multipath and shadowing effects on the emitted signal. Therefore fading resistant transmission techniques are considered. This techniques paper have to reveal an optimum trade-off between three parameters, namely: the characteristics of the video stream, the complexity of the modulation and coding scheme, and the efficiency of the transmission, in term of BER
A comparative study of the performance of seven- and 63-chip optical code-division multiple-access encoders and decoders based on superstructured fiber Bragg gratings
We report a range of elementary optical coding and decoding experiments employing superstructured fiber Bragg grating (SSFBG) components: first, we perform a comparative study of the relative merits of bipolar and unipolar coding: decoding schemes and show that the SSFBG approach allows high-quality unipolar and bipolar coding. A performance close to that-theoretically predicted for seven-chip, 160-Gchip/s M-sequence codes is obtained. Second, we report the fabrication and performance of 63-chip, 160-Gchip/s, bipolar Gold sequence grating pairs. These codes are at least eight times longer than those generated by any other scheme based on fiber grating technology so far reported. Last, we describe a range of transmission system experiments for both the seven- and 63-bit bipolar grating pairs. Error-free performance is obtained over transmission distances of ~25 km of standard fiber. In addition, we have demonstrated error-free performance under multiuser operation (two simultaneous users). Our results highlight the precision and flexibility of our particular grating writing process and show that SSFBG technology represents a promising technology not just for optical code division multiple access (OCDMA) but also for an extended range of other pulse-shaping optical processing applications
Improved decoder metrics for DS-CDMA in practical 3G systems
While 4G mobile networks have been deployed since 2008. In several of the more developed markets, 3G mobile networks are still growing with 3G having the largest market -in terms of number of users- by 2019. 3G networks are based on Direct- Sequence Code-Division Multiple-Access (DS-CDMA). DS-CDMA suffers mainly from the Multiple Access Interference (MAI) and fading. Multi-User Detectors (MUDs) and Error Correcting Codes (ECCs) are the primary means to combat MAI and fading. MUDs, however, suffer from high complexity, including most of sub-optimal algorithms. Hence, most commercial implementations still use conventional single-user matched filter detectors. This thesis proposes improved channel decoder metrics for enhancing uplink performance in 3G systems. The basic idea is to model the MAI as conditionally Gaussian, instead of Gaussian, conditioned on the usersâ cross-correlations and/or the channel fading coefficients. The conditioning implies a time-dependent variance that provides enhanced reliability estimates at the decoder inputs. We derive improved log-likelihood ratios (ILLRs) for bit- and chip- asynchronous multipath fading channels. We show that while utilizing knowledge of all usersâ code sequences for the ILLR metric is very complicated in chip-asynchronous reception, a simplified expression relying on truncated group delay results in negligible performance loss. We also derive an expression for the error probability using the standard Gaussian approximation for asynchronous channels for the widely used raised cosine pule shaping. Our study framework considers practical 3G systems, with finite interleaving, correlated multipath fading channel models, practical pulse shaping, and system parameters obtained from CDMA2000 standard. Our results show that for the fully practical cellular uplink channel, the performance advantage due to ILLRs is significant and approaches 3 dB
- âŠ