Optimization of Discrete-parameter Multiprocessor Systems using a Novel Ergodic Interpolation Technique

Modern multi-core systems have a large number of design parameters, most of which are discrete-valued, and this number is likely to keep increasing as chip complexity rises. Further, the accurate evaluation of a potential design choice is computationally expensive because it requires detailed cycle-accurate system simulation. If the discrete parameter space can be embedded into a larger continuous parameter space, then continuous space techniques can, in principle, be applied to the system optimization problem. Such continuous space techniques often scale well with the number of parameters. We propose a novel technique for embedding the discrete parameter space into an extended continuous space so that continuous space techniques can be applied to the embedded problem using cycle accurate simulation for evaluating the objective function. This embedding is implemented using simulation-based ergodic interpolation, which, unlike spatial interpolation, produces the interpolated value within a single simulation run irrespective of the number of parameters. We have implemented this interpolation scheme in a cycle-based system simulator. In a characterization study, we observe that the interpolated performance curves are continuous, piece-wise smooth, and have low statistical error. We use the ergodic interpolation-based approach to solve a large multi-core design optimization problem with 31 design parameters. Our results indicate that continuous space optimization using ergodic interpolation-based embedding can be a viable approach for large multi-core design optimization problems.Comment: A short version of this paper will be published in the proceedings of IEEE MASCOTS 2015 conferenc

Interval simulation: raising the level of abstraction in architectural simulation

Detailed architectural simulators suffer from a long development cycle and extremely long evaluation times. This longstanding problem is further exacerbated in the multi-core processor era. Existing solutions address the simulation problem by either sampling the simulated instruction stream or by mapping the simulation models on FPGAs; these approaches achieve substantial simulation speedups while simulating performance in a cycle-accurate manner This paper proposes interval simulation which rakes a completely different approach: interval simulation raises the level of abstraction and replaces the core-level cycle-accurate simulation model by a mechanistic analytical model. The analytical model estimates core-level performance by analyzing intervals, or the timing between two miss events (branch mispredictions and TLB/cache misses); the miss events are determined through simulation of the memory hierarchy, cache coherence protocol, interconnection network and branch predictor By raising the level of abstraction, interval simulation reduces both development time and evaluation time. Our experimental results using the SPEC CPU2000 and PARSEC benchmark suites and the MS multi-core simulator show good accuracy up to eight cores (average error of 4.6% and max error of 11% for the multi-threaded full-system workloads), while achieving a one order of magnitude simulation speedup compared to cycle-accurate simulation. Moreover interval simulation is easy to implement: our implementation of the mechanistic analytical model incurs only one thousand lines of code. Its high accuracy, fast simulation speed and ease-of-use make interval simulation a useful complement to the architect's toolbox for exploring system-level and high-level micro-architecture trade-offs

Fast simulation techniques for microprocessor design space exploration

Designing a microprocessor is extremely time-consuming. Computer architects heavily rely on architectural simulators, e.g., to drive high-level design decisions during early stage design space exploration. The benefit of architectural simulators is that they yield relatively accurate performance results, are highly parameterizable and are very flexible to use. The downside, however, is that they are at least three or four orders of magnitude slower than real hardware execution. The current trend towards multicore processors exacerbates the problem; as the number of cores on a multicore processor increases, simulation speed has become a major concern in computer architecture research and development. In this dissertation, we propose and evaluate two simulation techniques that reduce the simulation time significantly: statistical simulation and interval simulation. Statistical simulation speeds up the simulation by reducing the number of dynamically executed instructions. First, we collect a number of program execution characteristics into a statistical profile. From this profile we can generate a synthetic trace that exhibits the same execution behavior but which has a much shorter trace length as compared to the original trace. Simulating this synthetic trace then yields a performance estimate. Interval simulation raises the level of abstraction in architectural simulation; it replaces the core-level cycle-accurate simulation model by a mechanistic analytical model. The analytical model builds on insights from interval analysis: miss events divide the smooth streaming of instructions into so called intervals. The model drives the timing by analyzing the type of the miss events and their latencies, instead of tracking the individual instructions as they propagate through the pipeline stages

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

A methodology for analyzing commercial processor performance numbers

The wealth of performance numbers provided by benchmarking corporations makes it difficult to detect trends across commercial machines. A proposed methodology, based on statistical data analysis, simplifies exploration of these machines' large datasets