Empirical derivation of upper and lower bounds of NBTI aging for embedded cores

In deeply scaled CMOS technologies, device aging causes transistor performance parameters to degrade over time. While reliable models to accurately assess these degradations are available for devices and circuits, the extension to these models for estimating the aging of microprocessor cores is not trivial and there is no well accepted model in the literature. This work proposes a methodology for deriving an NBTI-induced aging model for embedded cores. Since aging can only be determined on a netlist, we use an empirical approach based on characterizing the model using a set of open synthesizable embedded cores, which allows us to establish a link between the aging at the transistor level and the aging from the core perspective in terms of maximum frequency degradation. Using this approach, we were able to (1) prove the independence of the aging on the workloads which run by the cores, and (2) calculate upper and lower bounds for the “aging factor” that can be used for a generic embedded processor. Results show that our method yields very good accuracy in predicting the frequency degradation of cores due to NBTI aging effect, and can be used with confidence when the netlist of the cores is not available

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements

Run-time Resource Management in CMPs Handling Multiple Aging Mechanisms

Abstract—Run-time resource management is fundamental for efficient execution of workloads on Chip Multiprocessors. Application- and system-level requirements (e.g. on performance vs. power vs. lifetime reliability) are generally conflicting each other, and any decision on resource assignment, such as core allocation or frequency tuning, may positively affect some of them while penalizing some others. Resource assignment decisions can be perceived in few instants of time on performance and power consumption, but not on lifetime reliability. In fact, this latter changes very slowly based on the accumulation of effects of various decisions over a long time horizon. Moreover, aging mechanisms are various and have different causes; most of them, such as Electromigration (EM), are subject to temperature levels, while Thermal Cycling (TC) is caused mainly by temperature variations (both amplitude and frequency). Mitigating only EM may negatively affect TC and vice versa. We propose a resource orchestration strategy to balance the performance and power consumption constraints in the short-term and EM and TC aging in the long-term. Experimental results show that the proposed approach improves the average Mean Time To Failure at least by 17% and 20% w.r.t. EM and TC, respectively, while providing same performance level of the nominal counterpart and guaranteeing the power budget

Reliable Software for Unreliable Hardware - A Cross-Layer Approach

A novel cross-layer reliability analysis, modeling, and optimization approach is proposed in this thesis that leverages multiple layers in the system design abstraction (i.e. hardware, compiler, system software, and application program) to exploit the available reliability enhancing potential at each system layer and to exchange this information across multiple system layers

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above

Dynamic Lifetime Reliability and Energy Management for Network-on-Chip based Chip Multiprocessors

In this dissertation, we study dynamic reliability management (DRM) and dynamic energy management (DEM) techniques for network-on-chip (NoC) based chip multiprocessors (CMPs). In the first part, the proposed DRM algorithm takes both the computational and the communication components of the CMP into consideration and combines thread migration and dynamic voltage and frequency scaling (DVFS) as the two primary techniques to change the CMP operation. The goal is to increase the lifetime reliability of the overall system to the desired target with minimal performance degradation. The simulation results on a variety of benchmarks on 16 and 64 core NoC based CMP architectures demonstrate that lifetime reliability can be improved by 100% for an average performance penalty of 7.7% and 8.7% for the two CMP architectures. In the second part of this dissertation, we first propose novel algorithms that employ Kalman filtering and long short term memory (LSTM) for workload prediction. These predictions are then used as the basis on which voltage/frequency (V/F) pairs are selected for each core by an effective dynamic voltage and frequency scaling algorithm whose objective is to reduce energy consumption but without degrading performance beyond the user set threshold. Secondly, we investigate the use of deep neural network (DNN) models for energy optimization under performance constraints in CMPs. The proposed algorithm is implemented in three phases. The first phase collects the training data by employing Kalman filtering for workload prediction and an efficient heuristic algorithm based on DVFS. The second phase represents the training process of the DNN model and in the last phase, the DNN model is used to directly identify V/F pairs that can achieve lower energy consumption without performance degradation beyond the acceptable threshold set by the user. Simulation results on 16 and 64 core NoC based architectures demonstrate that the proposed approach can achieve up to 55% energy reduction for 10% performance degradation constraints. Simulation experiments compare the proposed algorithm against existing approaches based on reinforcement learning and Kalman filtering and show that the proposed DNN technique provides average improvements in energy-delay-product (EDP) of 6.3% and 6% for the 16 core architecture and of 7.4% and 5.5% for the 64 core architecture

Effects of intermittent faults on the reliability of a Reduced Instruction Set Computing (RISC) microprocessor

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.With the scaling of complementary metal-oxide-semiconductor (CMOS) technology to the submicron range, designers have to deal with a growing number and variety of fault types. In this way, intermittent faults are gaining importance in modern very large scale integration (VLSI) circuits. The presence of these faults is increasing due to the complexity of manufacturing processes (which produce residues and parameter variations), together with special aging mechanisms. This work presents a case study of the impact of intermittent faults on the behavior of a reduced instruction set computing (RISC) microprocessor. We have carried out an exhaustive reliability assessment by using very-high-speed-integrated-circuit hardware description language (VHDL)-based fault injection. In this way, we have been able to modify different intermittent fault parameters, to select various targets, and even, to compare the impact of intermittent faults with those induced by transient and permanent faults.This work was supported by the Spanish Government under the Research Project TIN2009-13825 and by the Universitat Politecnica de Valencia under the Project SP20120806. Associate Editor: L. Cui.Gracia-Morán, J.; Baraza Calvo, JC.; Gil Tomás, DA.; Saiz-Adalid, L.; Gil, P. (2014). Effects of intermittent faults on the reliability of a Reduced Instruction Set Computing (RISC) microprocessor. IEEE Transactions on Reliability. 63(1):144-153. https://doi.org/10.1109/TR.2014.2299711S14415363

Characterization of the Evolution of IC Emissions after Accelerated Aging

9 pagesInternational audienceWith the evolving technological development of integrated circuits (ICs), ensuring electromagnetic compatibility (EMC) is becoming a serious challenge for electronic circuit and system manufacturers. Although electronic components must pass a set of EMC tests to ensure safe operations, the evolution over time of EMC is not characterized and cannot be accurately forecast. This paper presents an original study about the consequences of the aging of circuits on electromagnetic emission. Different types of standard applicative and accelerated-life tests are applied on a mixed power circuit dedicated to automotive applications. Its conducted emission is measured before and after these tests showing variations in EMC performances. Comparisons between each type of aging procedure show that the emission level of the circuit under test is affected differently

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems