GNSS transpolar earth reflectometry exploriNg system (G-TERN): mission concept

The global navigation satellite system (GNSS) Transpolar Earth Reflectometry exploriNg system (G-TERN) was proposed in response to ESA's Earth Explorer 9 revised call by a team of 33 multi-disciplinary scientists. The primary objective of the mission is to quantify at high spatio-temporal resolution crucial characteristics, processes and interactions between sea ice, and other Earth system components in order to advance the understanding and prediction of climate change and its impacts on the environment and society. The objective is articulated through three key questions. 1) In a rapidly changing Arctic regime and under the resilient Antarctic sea ice trend, how will highly dynamic forcings and couplings between the various components of the ocean, atmosphere, and cryosphere modify or influence the processes governing the characteristics of the sea ice cover (ice production, growth, deformation, and melt)? 2) What are the impacts of extreme events and feedback mechanisms on sea ice evolution? 3) What are the effects of the cryosphere behaviors, either rapidly changing or resiliently stable, on the global oceanic and atmospheric circulation and mid-latitude extreme events? To contribute answering these questions, G-TERN will measure key parameters of the sea ice, the oceans, and the atmosphere with frequent and dense coverage over polar areas, becoming a “dynamic mapper”of the ice conditions, the ice production, and the loss in multiple time and space scales, and surrounding environment. Over polar areas, the G-TERN will measure sea ice surface elevation (<;10 cm precision), roughness, and polarimetry aspects at 30-km resolution and 3-days full coverage. G-TERN will implement the interferometric GNSS reflectometry concept, from a single satellite in near-polar orbit with capability for 12 simultaneous observations. Unlike currently orbiting GNSS reflectometry missions, the G-TERN uses the full GNSS available bandwidth to improve its ranging measurements. The lifetime would be 2025-2030 or optimally 2025-2035, covering key stages of the transition toward a nearly ice-free Arctic Ocean in summer. This paper describes the mission objectives, it reviews its measurement techniques, summarizes the suggested implementation, and finally, it estimates the expected performance.Peer ReviewedPostprint (published version

Exploring bistatic scattering modeling for land surface applications using radio spectrum recycling in the Signal of Opportunity Coherent Bistatic Simulator

The potential for high spatio-temporal resolution microwave measurements has urged the adoption of the signals of opportunity (SoOp) passive radar technique for use in remote sensing. Recent trends in particular target highly complex remote sensing problems such as root-zone soil moisture and snow water equivalent. This dissertation explores the continued open-sourcing of the SoOp coherent bistatic scattering model (SCoBi) and its use in soil moisture sensing applications. Starting from ground-based applications, the feasibility of root-zone soil moisture remote sensing is assessed using available SoOp resources below L-band. A modularized, spaceborne model is then developed to simulate land-surface scattering and delay-Doppler maps over the available spectrum of SoOp resources. The simulation tools are intended to provide insights for future spaceborne modeling pursuits

GNSS transpolar earth reflectometry exploriNg system (G-TERN): Mission concept

The global navigation satellite system (GNSS) Transpolar Earth Reflectometry exploriNg system (G-TERN) was proposed in response to ESA's Earth Explorer 9 revised call by a team of 33 multi-disciplinary scientists. The primary objective of the mission is to quantify at high spatio-temporal resolution crucial characteristics, processes and interactions between sea ice, and other Earth system components in order to advance the understanding and prediction of climate change and its impacts on the environment and society. The objective is articulated through three key questions. 1) In a rapidly changing Arctic regime and under the resilient Antarctic sea ice trend, how will highly dynamic forcings and couplings between the various components of the ocean, atmosphere, and cryosphere modify or influence the processes governing the characteristics of the sea ice cover (ice production, growth, deformation, and melt)? 2) What are the impacts of extreme events and feedback mechanisms on sea ice evolution? 3) What are the effects of the cryosphere behaviors, either rapidly changing or resiliently stable, on the global oceanic and atmospheric circulation and mid-latitude extreme events? To contribute answering these questions, G-TERN will measure key parameters of the sea ice, the oceans, and the atmosphere with frequent and dense coverage over polar areas, becoming a "dynamic mapper" of the ice conditions, the ice production, and the loss in multiple time and space scales, and surrounding environment. Over polar areas, the G-TERN will measure sea ice surface elevation (&lt;10 cm precision), roughness, and polarimetry aspects at 30-km resolution and 3-days full coverage. G-TERN will implement the interferometric GNSS reflectometry concept, from a single satellite in near-polar orbit with capability for 12 simultaneous observations. Unlike currently orbiting GNSS reflectometry missions, the G-TERN uses the full GNSS available bandwidth to improve its ranging measurements. The lifetime would be 2025-2030 or optimally 2025-2035, covering key stages of the transition toward a nearly ice-free Arctic Ocean in summer. This paper describes the mission objectives, it reviews its measurement techniques, summarizes the suggested implementation, and finally, it estimates the expected performance

GNSS reflectometry for land remote sensing applications

Soil moisture and vegetation biomass are two essential parameters from a scienti c and economical point of view. On one hand, they are key for the understanding of the hydrological and carbon cycle. On the other hand, soil moisture is essential for agricultural applications and water management, and vegetation biomass is crucial for regional development programs. Several remote sensing techniques have been used to measure these two parameters. However, retrieving soil moisture and vegetation biomass with the required accuracy, and the appropriate spatial and temporal resolutions still remains a major challenge. The use of Global Navigation Satellite Systems (GNSS) reflected signals as sources of opportunity for measuring soil moisture and vegetation biomass is assessed in this PhD Thesis. This technique, commonly known as GNSS-Reflectometry (GNSS-R), has gained increasing interest among the scienti c community during the last two decades due to its unique characteristics. Previous experimental works have already shown the capabilities of GNSS-R to sense small reflectivity changes on the surface. The use of the co- and cross-polarized reflected signals was also proposed to mitigate nuisance parameters, such as soil surface roughness, in the determination of soil moisture. However, experimental evidence of the suitability of that technique could not be demonstrated. This work analyses from a theoretical and an experimental point of view the capabilities of polarimetric observations of GNSS reflected signals for monitoring soil moisture and vegetation biomass. The Thesis is structured in four main parts. The fi rst part examines the fundamental aspects of the technique and provides a detailed review of the GNSS-R state of the art for soil moisture and vegetation monitoring. The second part deals with the scattering models from land surfaces. A comprehensive description of the formation of scattered signals from rough surfaces is provided. Simulations with current state of the art models for bare and vegetated soils were performed in order to analyze the scattering components of GNSS reflected signals. A simpli ed scattering model was also developed in order to relate in a straightforward way experimental measurements to soil bio-geophysical parameters. The third part reviews the experimental work performed within this research. The development of a GNSS-R instrument for land applications is described, together with the three experimental campaigns carried out in the frame of this PhD Thesis. The analysis of the GNSS-R and ground truth data is also discussed within this part. As predicted by models, it was observed that GNSS scattered signals from natural surfaces are a combination of a coherent and an incoherent scattering components. A data analysis technique was proposed to separate both scattering contributions. The use of polarimetric observations for the determination of soil moisture was demonstrated to be useful under most soil conditions. It was also observed that forests with high levels of biomass could be observed with GNSS reflected signals. The fourth and last part of the Thesis provides an analysis of the technology perspectives. A GNSS-R End-to-End simulator was used to determine the capabilities of the technique to observe di erent soil reflectivity conditions from a low Earth orbiting satellite. It was determined that high accuracy in the estimation of reflectivity could be achieved within reasonable on-ground resolution, as the coherent scattering component is expected to be the predominant one in a spaceborne scenario. The results obtained in this PhD Thesis show the promising potential of GNSS-R measurements for land remote sensing applications, which could represent an excellent complementary observation for a wide range of Earth Observation missions such as SMOS, SMAP, and the recently approved ESA Earth Explorer Mission Biomass.La humedad del suelo y la biomasa de la vegetaci on son dos parametros clave desde un punto de vista tanto cient co como econ omico. Por una parte son esenciales para el estudio del ciclo del agua y del carbono. Por otra parte, la humedad del suelo es esencial para la gesti on de las cosechas y los recursos h dricos, mientras que la biomasa es un par ametro fundamental para ciertos programas de desarrollo. Varias formas de teledetección se han utilizado para la observaci on remota de estos par ametros, sin embargo, su monitorizaci on con la precisi on y resoluci on necesarias es todav a un importante reto tecnol ogico. Esta Tesis evalua la capacidad de medir humedad del suelo y biomasa de la vegetaci on con señales de Sistemas Satelitales de Posicionamiento Global (GNSS, en sus siglas en ingl es) reflejadas sobre la Tierra. La t ecnica se conoce como Reflectometr í a GNSS (GNSS-R), la cual ha ganado un creciente inter es dentro de la comunidad científ ca durante las dos ultimas d ecadas. Experimentos previos a este trabajo ya demostraron la capacidad de observar cambios en la reflectividad del terreno con GNSS-R. El uso de la componente copolar y contrapolar de la señal reflejada fue propuesto para independizar la medida de humedad del suelo de otros par ametros como la rugosidad del terreno. Sin embargo, no se pudo demostrar una evidencia experimental de la viabilidad de la t ecnica. En este trabajo se analiza desde un punto de vista te orico y experimental el uso de la informaci on polarim etrica de la señales GNSS reflejadas sobre el suelo para la determinaci on de humedad y biomasa de la vegetaci on. La Tesis se estructura en cuatro partes principales. En la primera parte se eval uan los aspectos fundamentales de la t ecnica y se da una revisi on detallada del estado del arte para la observaci on de humedad y vegetaci on. En la segunda parte se discuten los modelos de dispersi on electromagn etica sobre el suelo. Simulaciones con estos modelos fueron realizadas para analizar las componentes coherente e incoherente de la dispersi on de la señal reflejada sobre distintos tipos de terreno. Durante este trabajo se desarroll o un modelo de reflexi on simpli cado para poder relacionar de forma directa las observaciones con los par ametros geof sicos del suelo. La tercera parte describe las campañas experimentales realizadas durante este trabajo y discute el an alisis y la comparaci on de los datos GNSS-R con las mediciones in-situ. Como se predice por los modelos, se comprob o experimentalmente que la señal reflejada est a formada por una componente coherente y otra incoherente. Una t ecnica de an alisis de datos se propuso para la separacióon de estas dos contribuciones. Con los datos de las campañas experimentales se demonstr o el bene cio del uso de la informaci on polarim etrica en las señales GNSS reflejadas para la medici on de humedad del suelo, para la mayor a de las condiciones de rugosidad observadas. Tambi en se demostr o la capacidad de este tipo de observaciones para medir zonas boscosas densamente pobladas. La cuarta parte de la tesis analiza la capacidad de la t ecnica para observar cambios en la reflectividad del suelo desde un sat elite en orbita baja. Los resultados obtenidos muestran que la reflectividad del terreno podr a medirse con gran precisi on ya que la componente coherente del scattering ser a la predominante en ese tipo de escenarios. En este trabajo de doctorado se muestran la potencialidades de la t ecnica GNSS-R para observar remotamente par ametros del suelo tan importantes como la humedad del suelo y la biomasa de la vegetaci on. Este tipo de medidas pueden complementar un amplio rango de misiones de observaci on de la Tierra como SMOS, SMAP, y Biomass, esta ultima recientemente aprobada para la siguiente misi on Earth Explorer de la ESA

Analysis of Gnss-R Observations for Altimetry and Characterization of Earth Surfaces

Global Navigation Satellite Systems (GNSS) provide abundant, opportunistic signals that can be used to probe the Earth’s environment and surface. Utilizing reflected GNSS signals for remote sensing is called GNSS Reflectometry (GNSS-R). Sensing of the ocean, land, and ice, with potentially dense measurement coverage and rapid revisit times, is possible due to the distributed geometry of GNSS constellations. GNSS-R can provide some advantages over other Earth observation systems, like traditional radar altimeters or microwave radiometers. GNSS signals are well characterized and encoded with precise ranging and timing information. There are multiple transmitters in view at any time, and GNSS signals occupy a protected frequency band (L-band) that penetrates Earth’s atmosphere in all weather conditions.This dissertation focuses on the development of methods and analysis techniques to observe sea surface height and sea ice extent with reflected GNSS signals. A tool-kit is developed to take advantage of experimental data sets from aircraft and spacecraft, and to produce state-of-the-art altimetric retrievals. Algorithms for the re-tracking of altimetric delays are demonstrated. Techniques to characterize and models to correct GNSS-R path delay errors are built through analysis of TechDemoSat-1 (TDS-1) and NASA’s Cyclone Global Navigation Satellite System (CYGNSS) flight data. Neither TDS-1 nor CYGNSS were designed to make precise altimetry observations. Thus, this work evaluates practical performance limitations of these GNSS-R observations, and establishes requirements for future missions. Altimetry results with height retrieval standard deviation of σH = 11 m with 1 sec and σH = 3.8 m with 10 sec observations, are shown.This work creates a foundation of techniques that can support future GNSS-R missions dedicated to ocean surface altimetry by producing results with sufficient accuracy and precision to the ocean science community. These tools are built to inform future mission designs and aid scientific interpretation of GNSS-R measurements

An Effective Land Type Labeling Approach for Independently Exploiting High-Resolution Soil Moisture Products Based on CYGNSS Data

Recently, soil moisture (SM) has been estimated using Cyclone Global Navigation Satellite System (CYGNSS) data. Machine learning (ML) algorithms for CYGNSS SM estimation can minimize unpredictable influences and help improve the accuracy of SM retrieval. However, ML-based CYGNSS SM estimation requires ancillary data from other sources, and thus, the uncertainty, internal errors, and even dependence on external parameters of this process may complicate and limit SM estimation. In this article, a simple land type (LT) digitization strategy that incorporates the idea of classification is proposed with feature optimization to achieve an effective and independent SM retrieval without any other auxiliary data. The input features are chosen from the CYGNSS data themselves, and the corresponding labels (digitized stable LTs) are used in the training stage of the SM estimation model. During the fine-tuning stage, several input features (such as the dielectric constant and incident angle) are compared and selected after optimization to achieve better results. Moreover, the CYGNSS data are gridded at 9 × 9 km to validate the enhanced soil moisture active passive mission SM products at a resolution of 9 km. Only three input variables are adopted for the SM learning model, which are directly derived from the CYGNSS data for independently estimating SM at a high spatial resolution. Powerful performance is achieved by extreme gradient boosting based on a LT digitalization strategy, with root-mean-square error (RMSE) and unbiased RMSE (ubRMSE) values of 0.063 cm3/cm3 and a correlation coefficient (R) of 0.71 for the entire dataset. The performances of different ML learning models for various LTs are presented. The mean ubRMSE and RMSE are 0.041 cm3/cm3 and 0.057 cm3/cm3, respectively. The results demonstrate the effectiveness of the proposed LT digitization strategy for retrieving SM from CYGNSS data with various ML methods and the capability of SM estimation using the CYGNSS product as a new independent source

Advanced GNSS-R instruments for altimetric and scatterometric applications

This work is the result of more than eight years during a bachelor thesis, a master thesis, and the Ph.D. thesis dedicated to the development of the Microwave Interferometric Reflectometer (MIR) instrument. It summarizes all the knowledge acquired during this time, and describes the MIR instrument as detailed as possible. MIR is a Global Navigation Satellite System - Reflectometer (GNSS-R), that is, an instrument that uses Global Navigation Satellite System (GNSS) signals scattered on the Earth's surface to retrieve geophysical parameters. These signals are received below the noise level, but since they have been spread in the frequency domain using spread-spectrum techniques, and in particular using the so-called Pseudo Random Noise (PRN) codes, it is still possible to retrieve them because of the large correlation gain achieved. In GNSS-R, two main techniques are used for this purpose: the conventional technique cGNSS-R and the interferometric one iGNSS-R, each with its pros and cons. In the former technique, the reflected signal is cross-correlated against a locally generated clean-replica of the transmitted signal. In the latter technique the reflected signal is cross-correlated with the direct one. Nowadays multiple GNSS systems coexist, transmitting narrow and wide, open and private signals. A comparison between systems, signals, and techniques in fair conditions is necessary. The MIR instrument has been designed as an airborne instrument for that purpose: the instrument has two arrays, an up-looking one, and a down-looking one, each with 19 dual-band antennas in a hexagonal distribution. The instrument is able to form 2 beams at each frequency band (L1/E1, and L5/E5A), which are pointing continuously to the desired satellites taking into account their position, as well as the instrument's position and attitude. The data is sampled and stored for later post-processing. Last but not least, MIR is auto-calibrated using similar signals to the ones transmitted by the GNSS satellites. During the instrument development, the Distance Measurement Equipment/TACtical Air Navigation (DME/TACAN) signals from the Barcelona airport threatened to disrupt the interferometric technique. These signals were also studied, and it was concluded that the use of a mitigation systems were as strongly recommended. The interferometric technique was also affected by the unwanted contribution of other satellites. The impact of these contributions was studied using real data gathered during this Ph.D. thesis. During these 8 years, the instrument was designed, built, tested, and calibrated. A field campaign was carried out in Australia between May 2018 and June 2018 to determine the instrument's accuracy in sensing soil moisture and sea altimetry. This work describes each of these steps in detail and aims to be helpful for those who decide to continue the legacy of this instrument.Este trabajo es el resultado de más de 8 años de doctorado dedicados al desarrollo del instrumento Microwave Interferometric Reflectometer (MIR). Esta tesis resume todo el conocimiento adquirido durante este tiempo, y describe el MIR lo más detalladamente posible. El MIR es un Reflectómetro de señales de Sistemas Globales de Navegación por Satélite (GNSS-R), es decir, es un instrumento que usa señales de GNSS reflejadas en la superficie de la tierra para obtener parámetros geofísicos. Estas señales son recibidas bajo el nivel de ruido, pero dado que han sido ensanchadas en el dominio frecuencial usando técnicas de espectro ensanchado, y en particular usando códigos Pseudo Random Noise (PRN), es todavía posible recibirlas debido a la elevada ganancia de correlación. En GNSS-R existen dos técnicas para este propósito: la convencional (cGNSS-R), y la interferométrica (iGNSS-R), cada una con sus pros y sus contras. En la primera se calcula la correlación cruzada de la señal reflejada y de una réplica generada del código transmitido. En la segunda técnica se calcula la correlación cruzada de la señal reflejada y de la señal directa. Hoy en día muchos sistemas GNSS coexisten, transmitiendo señales de distintos anchos de banda, algunas públicas y otras privadas. Una comparación entre sistemas, señales, y técnicas en condiciones justas es necesaria. El MIR es un instrumento aerotransportado diseñado como para ese propósito: el instrumento tiene dos arrays de antenas, uno apuntando al cielo, y otro apuntando al suelo, cada uno con 19 antenas doble banda en una distribución hexagonal. El instrumento puede formar 2 haces en cada banda frecuencial (L1/E1 y L5/E5A) que apuntan continuamente a los satélites deseados teniendo en cuenta su posición, y la posición y actitud del instrumento. Los datos son guardados para ser procesados posteriormente. Por último pero no menos importante, el MIR se calibra usando señales similares a las transmitidas por los satélites de GNSS. Durante el desarrollo del instrumento, señales del sistema Distance Measuremt Equi Distance Measurement Equipment/TACtical Air Navigation (DME/TACAN) del aeropuerto de Barcelona mostraron ser una amenaza para la técnica interferométrica. Estas señales fueron estudiadas y se concluyó que era encarecidamente recomendado el uso de sistemas de mitigación de interferencias. La técnica interferométrica también se ve afectada por las contribuciones no deseadas de otros satélites, llamado cross-talk. El impacto del cross-talk fue estudiado usando datos reales tomados durante esta tesis doctoral. A lo largo de estos 8 años el instrumento ha sido diseñado, construido, testeado y calibrado. Una campaña de medidas fue llevada a cabo en Australia entre Mayo de 2018 y Junio de 2018 para determinar la capacidad del instrumento para estimar la humedad del terreno y la altura del mar. Este documento describe cada uno de estos pasos al detalle y espera resultar útil para aquellos que decidan continuar con el legado de este instrumento.Postprint (published version

Characterizing slope instability kinematics by integrating multi-sensor satellite remote sensing observations

Over the past few decades, the occurrence and intensity of geological hazards, such as landslides, have substantially risen due to various factors, including global climate change, seismic events, rapid urbanization and other anthropogenic activities. Landslide disasters pose a significant risk in both urban and rural areas, resulting in fatalities, infrastructure damages, and economic losses. Nevertheless, conventional ground-based monitoring techniques are often costly, time-consuming, and require considerable resources. Moreover, some landslide incidents occur in remote or hazardous locations, making ground-based observation and field investigation challenging or even impossible. Fortunately, the advancements in spaceborne remote sensing technology have led to the availability of large-scale and high-quality imagery, which can be utilized for various landslide-related applications, including identification, monitoring, analysis, and prediction. This efficient and cost-effective technology allows for remote monitoring and assessment of landslide risks and can significantly contribute to disaster management and mitigation efforts. Consequently, spaceborne remote sensing techniques have become vital for geohazard management in many countries, benefiting society by providing reliable downstream services. However, substantial effort is required to ensure that such benefits are provided. For establishing long-term data archives and reliable analyses, it is essential to maintain consistent and continued use of multi-sensor spaceborne remote sensing techniques. This will enable a more thorough understanding of the physical mechanisms responsible for slope instabilities, leading to better decision-making and development of effective mitigation strategies. Ultimately, this can reduce the impact of landslide hazards on the general public. The present dissertation contributes to this effort from the following perspectives: 1. To obtain a comprehensive understanding of spaceborne remote sensing techniques for landslide monitoring, we integrated multi-sensor methods to monitor the entire life cycle of landslide dynamics. We aimed to comprehend the landslide evolution under complex cascading events by utilizing various spaceborne remote sensing techniques, e.g., the precursory deformation before catastrophic failure, co-failure procedures, and post-failure evolution of slope instability. 2. To address the discrepancies between spaceborne optical and radar imagery, we present a methodology that models four-dimensional (4D) post-failure landslide kinematics using a decaying mathematical model. This approach enables us to represent the stress relaxation for the landslide body dynamics after failure. By employing this methodology, we can overcome the weaknesses of the individual sensor in spaceborne optical and radar imaging. 3. We assessed the effectiveness of a newly designed small dihedral corner reflector for landslide monitoring. The reflector is compatible with both ascending and descending satellite orbits, while it is also suitable for applications with both high-resolution and medium-resolution satellite imagery. Furthermore, although its echoes are not as strong as those of conventional reflectors, the cost of the newly designed reflectors is reduced, with more manageable installation and maintenance. To overcome this limitation, we propose a specific selection strategy based on a probability model to identify the reflectors in satellite images

Contributions to land, sea, and sea ice remote sensing using GNSS-reflectometry

This PhD thesis researches the use of passive remote sensing techniques using signals transmitted from the navigation satellites (GNSS) in order to retrieve different geophysical parameters. The thesis consists of two different parts without taking into account the introduction, the state of the art and the conclusions. The first part analyzes the Interference Pattern Technique (IPT), which was previously used in another PhD thesis, and proposes some key improvements. First, the addition of horizontal polarization to the existing vertical polarization is proposed. Then, the retrieval of soil moisture is studied using the horizontal polarization only and combining both polarizations to correct for the surface roughness effects. It is also demonstrated that the phase difference between the two interference patterns is directly related to soil moisture content. A field campaign was conducted in Australia to test empirically all the theoretical developments and algorithms. Secondly, the possibility of measuring Significant Wave Height (SWH) and Mean Sea Surface Level (MSSL) using the IPT is studied. A three month field campaign over coastal sea is devoted to that study. The SWH retrieval is a new estimation algorithm based on measuring the point where the interference pattern loses coherence. The MSSL retrieval is based on the estimation of the IPT oscillation frequency, testing different spectral estimators to improve the accuracy. Since the IPT is limited in coverage due to its static requirements, the research conducted in this thesis migrated to scatterometric GNSS-R techniques. The main goal that migration was to increase coverage of the different GNSS-R instruments. Therefore, the second part of this thesis analyzes the applicability of a scatterometric technique from different platforms: ground-based (mobile and fixed), airborne, and spaceborne. The ground-based still platforms have allowed to develop a soil moisture retrieval algorithm. The ground-based moving platforms have extended the validity of that algorithm. Airborne platforms have been used to study the reflected electric field statistics when the surface reflecting surface is varying (smooth or rough land, and sea). They have also been used to develop different algorithms to measure the coherent and incoherent scattered components depending on the data structure (real-data or complex data). Coherent reflectivity measured from airborne platforms has been compared to other techniques such microwave radiometry, which is highly used in the soil moisture retrieval from spaceborne sensors, and other sensors using optical, multispectral and thermal frequency bands. These relationships between microwave radiometry and GNSS-R measurements suggests the potential synergy of both techniques. A sea ice detection algorithm is also developed using scatterometric GNSS-R data from the UK TDS-1 mission. This algorithm is based on measuring the degree of coherence of the reflected waveform. Finally, a field campaign was conducted to study the effect of vegetation on the GNSS signals that pass through it in order to take into account and correct the effect of vegetation in the GNSS-R data and in the soil moisture retrieval algorithms.Aquesta tesi doctoral aprofundeix en el coneixement de les tècniques de teledetecció passives utilitzant senyals emesos pels satèl·lits de navegació (GNSS) amb l'objectiu de recuperar diferents paràmetres geofísics del terreny. La tesi conté dues parts ben diferenciades a banda de la introducció, estat de l'art i conclusions. La primera part analitza la tècnica coneguda com a patró d'interferències, utilitzada prèviament en una altra tesi doctoral, i proposa certes millores per la seva aplicabilitat. En primer lloc es decideix afegir polarització horitzontal a la ja existent polarització vertical, i s'estudia la recuperació d'humitat del sòl utilitzant només polarització horitzontal i combinant les dues polaritzacions per corregir els efectes de la rugositat del terreny. A continuació es demostra que la mesura de desfasament entre els dos patrons d'interferència està directament relacionada amb la humitat del terreny. Es va realitzar una campanya de mesures a Austràlia per provar empíricament tots els desenvolupaments teòrics i algorismes proposats. En segon lloc s'analitza l'aplicabilitat del patró d'interferències en la mesura de l'altura de les onades (SWH) i del nivell del mar (MSSL), tots dos de forma precisa. L'estimació de l'alçada de les onades és un procés totalment nou basat en mesurar el punt on el patró d'interferències perd la coherència. L'estimació del nivell del mar es basa en l'anàlisi espectral del patró d'interferències provant diferents estimadors espectrals. Atès que la tècnica del patró d'interferència està limitada en cobertura per les seves característiques estàtiques, la investigació duta a terme en aquesta tesi doctoral va migrar cap a tècniques GNSS-R escateromètriques. El principal objectiu a assolir va ser el d'augmentar la cobertura dels diferents instruments GNSS-R de mesura. En conseqüència, la segona part d'aquesta tesi analitza l'aplicabilitat d'aquestes tècniques des de diferents plataformes terrestres (mòbils i fixes), aerotransportades i satèl·lit. Les plataformes terrestres fixes han permès derivar algoritmes de recuperació d'humitat i les mòbils estendre la validació d'aquests. Les plataformes aerotransportades s'han utilitzat per mirar l'estadística del camp elèctric reflectit quan la superfície on es reflecteixen els senyals GNSS va variant (terra plana o terra rugosa, i mar). També han servit per desenvolupar diferents algorismes amb l'objectiu de determinar les components coherent i incoherent del senyal reflectit. De la mateixa manera, dades de reflectivitat coherent mesurades des d'aquestes plataformes han estat comparades amb altres tècniques de teledetecció passiva com la radiometria de microones, altament utilitzada en la mesura d'humitat de terreny, i altres sensors òptics, multi-espectrals, i tèrmics. Aquests resultats han permès suggerir la possible sinergia de dades d'ambdues tecnologies. Un algorisme per detectar la presència de gel sobre el mar també ha estat desenvolupat mitjançant l'ús de dades GNSS-R escateromètriques satel·litals de la missió UK TDS-1. Aquest algorisme es basa en mesurar el grau de coherència de la forma d'ona reflectida. Finalment, s'ha realitzat un estudi de l'efecte de la vegetació en els senyals GNSS que la travessen, per tal de poder corregir aquest efecte en els algoritmes de recuperació d'humitat del terreny

BDS GNSS for Earth Observation

For millennia, human communities have wondered about the possibility of observing phenomena in their surroundings, and in particular those affecting the Earth on which they live. More generally, it can be conceptually defined as Earth observation (EO) and is the collection of information about the biological, chemical and physical systems of planet Earth. It can be undertaken through sensors in direct contact with the ground or airborne platforms (such as weather balloons and stations) or remote-sensing technologies. However, the definition of EO has only become significant in the last 50 years, since it has been possible to send artificial satellites out of Earth’s orbit. Referring strictly to civil applications, satellites of this type were initially designed to provide satellite images; later, their purpose expanded to include the study of information on land characteristics, growing vegetation, crops, and environmental pollution. The data collected are used for several purposes, including the identification of natural resources and the production of accurate cartography. Satellite observations can cover the land, the atmosphere, and the oceans. Remote-sensing satellites may be equipped with passive instrumentation such as infrared or cameras for imaging the visible or active instrumentation such as radar. Generally, such satellites are non-geostationary satellites, i.e., they move at a certain speed along orbits inclined with respect to the Earth’s equatorial plane, often in polar orbit, at low or medium altitude, Low Earth Orbit (LEO) and Medium Earth Orbit (MEO), thus covering the entire Earth’s surface in a certain scan time (properly called ’temporal resolution’), i.e., in a certain number of orbits around the Earth. The first remote-sensing satellites were the American NASA/USGS Landsat Program; subsequently, the European: ENVISAT (ENVironmental SATellite), ERS (European Remote-Sensing satellite), RapidEye, the French SPOT (Satellite Pour l’Observation de laTerre), and the Canadian RADARSAT satellites were launched. The IKONOS, QuickBird, and GeoEye-1 satellites were dedicated to cartography. The WorldView-1 and WorldView-2 satellites and the COSMO-SkyMed system are more recent. The latest generation are the low payloads called Small Satellites, e.g., the Chinese BuFeng-1 and Fengyun-3 series. Also, Global Navigation Satellite Systems (GNSSs) have captured the attention of researchers worldwide for a multitude of Earth monitoring and exploration applications. On the other hand, over the past 40 years, GNSSs have become an essential part of many human activities. As is widely noted, there are currently four fully operational GNSSs; two of these were developed for military purposes (American NAVstar GPS and Russian GLONASS), whilst two others were developed for civil purposes such as the Chinese BeiDou satellite navigation system (BDS) and the European Galileo. In addition, many other regional GNSSs, such as the South Korean Regional Positioning System (KPS), the Japanese quasi-zenital satellite system (QZSS), and the Indian Regional Navigation Satellite System (IRNSS/NavIC), will become available in the next few years, which will have enormous potential for scientific applications and geomatics professionals. In addition to their traditional role of providing global positioning, navigation, and timing (PNT) information, GNSS navigation signals are now being used in new and innovative ways. Across the globe, new fields of scientific study are opening up to examine how signals can provide information about the characteristics of the atmosphere and even the surfaces from which they are reflected before being collected by a receiver. EO researchers monitor global environmental systems using in situ and remote monitoring tools. Their findings provide tools to support decision makers in various areas of interest, from security to the natural environment. GNSS signals are considered an important new source of information because they are a free, real-time, and globally available resource for the EO community