3,465 research outputs found
Broadband Application of High Impedance Ground Planes
Electrical conductors have long been the only materials available to antenna designers for reflecting structures. However, recently reported high impedance ground plane (HIGP) structures offer an alternative by creating image currents and reflections, within a limited frequency stop-band, that are in-phase with a source rather than out-of-phase as for a perfect electric conducting (PEC) surface. Also, the high impedance structures suppress surface waves while surface waves propagate on PEC surfaces. This research explores broadband antenna applications for HIGP structures. A broadband surface mount antenna is applied to both a homogeneous narrowband HIGP and a spatially varying broadband HIGP design. Measurements reveal the ground plane alters the fundamental radiating modes of the antenna and show high frequency regions of the ground plane short out low frequency energy in the antenna. Novel broadband integrated antenna/ground-plane structures are also introduced and analyzed. Basic high impedance elements are linked to form larger broadband antenna elements within the ground plane itself. The structure provides a passive-receive capability over a 9 to 1 bandwidth, is very light and thin, and offers straightforward flush-mounted integration on PEC surfaces
Boundary effects in finite size plasmonic crystals: Focusing and routing of plasmonic beams for optical communications
Plasmonic crystals, which consist of periodic arrangements of surface features at a metal-dielectric interface, allow the manipulation of optical information in the form of surface plasmon polaritons. Here we investigate the excitation and propagation of plasmonic beams in and around finite size plasmonic crystals at telecom wavelengths, highlighting the effects of the crystal boundary shape and illumination conditions. Significant differences in broad plasmonic beam generation by crystals of different shapes are demonstrated, while for narrow beams, the propagation onto the smooth metal film is less sensitive to the crystal boundary shape. We show that by controlling the boundary shape, the size and the excitation beam parameters, directional control of propagating plasmonic modes and associated beam parameters such as angular beam splitting, focusing power and beam width can be efficiently achieved. This provides a promising route for robust and alignment-independent integration of plasmonic crystals with optical communication components
Microwave Photonic Applications - From Chip Level to System Level
Die Vermischung von Mikrowellen- und optischen Technologien â Mikrowellenphotonik â ist ein neu aufkommendes Feld mit hohem Potential. Durch die Nutzung der VorzĂŒge beider Welten hat die Mikrowellenphotonik viele AnwendungsfĂ€lle und ist gerade erst am Beginn ihrer Erfolgsgeschichte. Der Weg fĂŒr neue Konzepte, neue Komponenten und neue Anwendungen wird dadurch geebnet, dass ein höherer Grad an Integration sowie neue Technologien wie Silicon Photonics verfĂŒgbar sind. In diesem Werk werden zuerst die notwendigen grundlegenden Basiskomponenten â optische Quelle, elektro-optische Wandlung, Ăbertragungsmedium und opto-elektrische Wandlung â eingefĂŒhrt. Mithilfe spezifischer Anwendungsbeispiele, die von Chipebene bis hin zur Systemebene reichen, wird der elektrooptische Codesign-Prozess veranschaulicht. SchlieĂlich werden zukĂŒnftige Ausrichtungen wie die UnterstĂŒtzung von elektrischen TrĂ€gern im Millimeterwellen- und THz-Bereich sowie Realisierungsoptionen in integrierter Optik und Nanophotonik diskutiert.The hybridization between microwave and optical technologies â microwave photonics â is an emerging field with high potential. Benefitting from the best of both worlds, microwave photonics has many use cases and is just at the beginning of its success story. The availability of a higher degree of integration and new technologies such as silicon photonics paves the way for new concepts, new components and new applications. In this work, first, the necessary basic building blocks â optical source, electro-optical conversion, transmission medium and opto-electrical conversion â are introduced. With the help of specific application examples ranging from chip level to system level, the electro-optical co-design process for microwave photonic systems is illustrated. Finally, future directions such as the support of electrical carriers in the millimeter wave and THz range and realization options in integrated optics and nanophotonics are discussed
A Compact RF/Photonic Antenna using a Quantum Dot Mode Locked Laser as a Source
The research presented here is focused on achieving an active compact RF/Photonic antenna module based on a broadband antenna design integrated with a quantum dot mode-locked laser (QDMLL). A two-section QDMLL is used to produce pulsed microwaves signals to feed the radiating antenna. To realize the microwave signal radiation generated by the QDMLL, several possible MLL-integrated-antennas are proposed. The prototype integrated antenna is fully described, including the design, fabrication, and characterization of the antenna performance. Additionally, this work deals with the improvement of the radiation efficiency and functionality of the integrated module. An impedance matching network is designed to match the QDMLL to a bowtie slot antenna. The RF/Photonic integrated prototype is tested and analyzed over a wide frequency range. Finally a QDMLL-integrated-phased antenna array is designed to achieve beam steering. By manipulating the applied voltage bias of each QDMLL, one can achieve beam steering without the use of external RF phase shifters yielding a more compact design of an RF/photonic antenna on a chip. The 2-element integrated prototype is presented and discussed. Beam-steering is fully demonstrated via both simulation and measurements
Recommended from our members
Silicon - polymer hybrid integrated microwave photonic devices for optical interconnects and electromagnetic wave detection
textThe accelerating increase in information traffic demands the expansion of optical access network systems that require high-performance optical and photonic components. In short-range communication links, optical interconnects have been widely accepted as a viable approach to solve the problems that copper based electrical interconnects have encountered in keeping up with the surge in the data rate demand over the last decades. Low cost, ease of fabrication, and integration capabilities of low optical-loss polymers make them attractive for integrated photonic applications to support futuristic data communication networks. In addition to passive wave-guiding components, electro-optic (EO) polymers consisting of a polymeric matrix doped with organic nonlinear chromophores have enabled wide-RF-bandwidth and low-power active photonic devices. Beside board level passive and active optical components, on-chip micro- or nano-photonic devices have been made possible by the hybrid integration of EO polymers onto the silicon platform. In recent years, silicon photonics have attracted a significant amount of attentions, because it offers compact device size and the potential of complementary metalâoxideâsemiconductor (CMOS) compatible photonic integrated circuits. The combination of silicon photonics and EO polymers can enable miniaturized and high-performance hybrid integrated photonic devices, such as electro-optic modulators, optical interconnects, and microwave photonic sensors. Silicon photonic crystal waveguides (PCWs) exhibit slow-light effects which are beneficial for device miniaturization. Especially, EO polymer filled silicon slotted PCWs further reduce the device size and enhance the device performance by combining the best of these two systems. The potential applications of these silicon-polymer hybrid integrated devices include not only optical interconnects, but also optical sensing and microwave photonics. In this dissertation, the design, fabrication, and characterization of several types of silicon-polymer hybrid photonic devices will be presented, including EO polymer filled silicon PCW modulators for on-chip optical interconnects, antenna-coupled optical modulators for electromagnetic wave detections, and low-loss strip-to-slot PCW mode converters. In addition, some polymer-based devices and silicon-based photonic devices will also be presented, such as traveling wave electro-optic polymer modulators based on domain-inversion directional couplers, and silicon thermo-optic switches based on coupled photonic crystal microcavities. Furthermore, some microwave (or RF) components such as integrated broadband bowtie antennas for microwave photonic applications will be covered. Some on-going work or suggested future work will also be introduced, including in-device pyroelectric poling for EO polymer filled silicon slot PCWs, millimeter- or Terahertz-wave sensors based on EO polymer filled plasmonic slot waveguide, low-loss silicon-polymer hybrid slot photonic crystal waveguides fabricated by CMOS foundry, logic devices based on EO polymer microring resonators, and so on.Electrical and Computer Engineerin
Photonic based Radar: Characterization of 1x4 Mach-Zehnder Demultiplexer
This work is based on a research activity which aims to implement an optical transceiver for a photonic-assisted fullyâdigital radar system based on optic miniaturized optical devices both for the optical generation of the radiofrequency (RF) signal and for the optical sampling of the received RF signal. The work is more focused on one very critical block of receiver which is used to parallelize optical samples. Parallelization will result in samples which will be lower in repetition rate so that we can use commercial available ADCs for further processing. This block needs a custom design to meet all the system specifications. In order to parallelize the samples a 1x4 switching matrix (demux) based on Mach Zehnder (MZ) interferometer has been proposed. The demux technique is Optical Time Division Demultiplexing. In order to operate this demux according to the requirements the characterization of device is needed. We need to find different stable control points (coupler bias and MZ bias) of demux to get output samples with high extinction ratio. A series of experiments have been performed to evaluate the matrix performance, issues and sensitivity. The evaluated results along with the whole scheme has been discussed in this document
- âŠ