Design techniques for dense embedded memory in advanced CMOS technologies

University of Minnesota Ph.D. dissertation. February 2012. Major: Electrical Engineering. Advisor: Chris H. Kim. 1 computer file (PDF); viii, 116 pages.On-die cache memory is a key component in advanced processors since it can boost micro-architectural level performance at a moderate power penalty. Demand for denser memories only going to increase as the number of cores in a microprocessor goes up with technology scaling. A commensurate increase in the amount of cache memory is needed to fully utilize the larger and more powerful processing units. 6T SRAMs have been the embedded memory of choice for modern microprocessors due to their logic compatibility, high speed, and refresh-free operation. However, the relatively large cell size and conflicting requirements for read and write make aggressive scaling of 6T SRAMs challenging in sub-22 nm. In this dissertation, circuit techniques and simulation methodologies are presented to demonstrate the potential of alternative options such as gain cell eDRAMs and spin-torque-transfer magnetic RAMs (STT-MRAMs) for high density embedded memories.Three unique test chip designs are presented to enhance the retention time and access speed of gain cell eDRAMs. Proposed bit-cells utilize preferential boostings, beneficial couplings, and aggregated cell leakages for expanding signal window between data `1' and `0'. The design space of power-delay product can be further enhanced with various assist schemes that harness the innate properties of gain cell eDRAMs. Experimental results from the test chips demonstrate that the proposed gain cell eDRAMs achieve overall faster system performances and lower static power dissipations than SRAMs in a generic 65 nm low-power (LP) CMOS process. A magnetic tunnel junction (MTJ) scaling scenario and an efficient HSPICE simulation methodology are proposed for exploring the scalability of STT-MRAMs under variation effects from 65 nm to 8 nm. A constant JC0*RA/VDD scaling method is adopted to achieve optimal read and write performances of STT-MRAMs and thermal stabilities for a 10 year retention are achieved by adjusting free layer thicknesses as well as projecting crystalline anisotropy improvements. Studies based on the proposed methodology show that in-plane STT-MRAM will outperform SRAM from 15 nm node, while its perpendicular counterpart requires further innovations in MTJ material properties in order to overcome the poor write performance from 22 nm node

Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions

Low-Power, Low-Voltage SRAM Circuits Design For Nanometric CMOS Technologies

Embedded SRAM memory is a vital component in modern SoCs. More than 80% of the System-on-Chip (SoC) die area is often occupied by SRAM arrays. As such, system reliability and yield is largely governed by the SRAM's performance and robustness. The aggressive scaling trend in CMOS device minimum feature size, coupled with the growing demand in high-capacity memory integration, has imposed the use of minimal size devices to realize a memory bitcell. The smallest 6T SRAM bitcell to date occupies a 0.1um2 in silicon area. SRAM bitcells continue to benefit from an aggressive scaling trend in CMOS technologies. Unfortunately, other system components, such as interconnects, experience a slower scaling trend. This has resulted in dramatic deterioration in a cell's ability to drive a heavily-loaded interconnects. Moreover, the growing fluctuation in device properties due to Process, Voltage, and Temperature (PVT) variations has added more uncertainty to SRAM operation. Thus ensuring the ability of a miniaturized cell to drive heavily-loaded bitlines and to generate adequate voltage swing is becoming challenging. A large percentage of state-of-the-art SoC system failures are attributed to the inability of SRAM cells to generate the targeted bitline voltage swing within a given access time. The use of read-assist mechanisms and current mode sense amplifiers are the two key strategies used to surmount bitline loading effects. On the other hand, new bitcell topologies and cell supply voltage management are used to overcome fluctuations in device properties. In this research we tackled conventional 6T SRAM bitcell limited drivability by introducing new integrated voltage sensing schemes and current-mode sense amplifiers. The proposed schemes feature a read-assist mechanism. The proposed schemes' functionality and superiority over existing schemes are verified using transient and statistical SPICE simulations. Post-layout extracted views of the devices are used for realistic simulation results. Low-voltage operated SRAM reliability and yield enhancement is investigated and a wordline boost technique is proposed as a means to manage the cell's WL operating voltage. The proposed wordline driver design shows a significant improvement in reliability and yield in a 400-mV 6T SRAM cell. The proposed wordline driver design exploit the cell's Dynamic Noise Margin (DNM), therefore boost peak level and boost decay rate programmability features are added. SPICE transient and statistical simulations are used to verify the proposed design's functionality. Finally, at a bitcell-level, we proposed a new five-transistor (5T) SRAM bitcell which shows competitive performance and reliability figures of merit compared to the conventional 6T bitcell. The functionality of the proposed cell is verified by post-layout SPICE simulations. The proposed bitcell topology is designed, implemented and fabricated in a standard ST CMOS 65nm technology process. A 1.2_ 1.2 mm2 multi-design project test chip consisting of four 32-Kbit (256-row x 128-column) SRAM macros with the required peripheral and timing control units is fabricated. Two of the designed SRAM macros are dedicated for this work, namely, a 32-Kbit 5T macro and a 32-Kbit 6T macro which is used as a comparison reference. Other macros belong to other projects and are not discussed in this document

TuRaN: True Random Number Generation Using Supply Voltage Underscaling in SRAMs

Prior works propose SRAM-based TRNGs that extract entropy from SRAM arrays. SRAM arrays are widely used in a majority of specialized or general-purpose chips that perform the computation to store data inside the chip. Thus, SRAM-based TRNGs present a low-cost alternative to dedicated hardware TRNGs. However, existing SRAM-based TRNGs suffer from 1) low TRNG throughput, 2) high energy consumption, 3) high TRNG latency, and 4) the inability to generate true random numbers continuously, which limits the application space of SRAM-based TRNGs. Our goal in this paper is to design an SRAM-based TRNG that overcomes these four key limitations and thus, extends the application space of SRAM-based TRNGs. To this end, we propose TuRaN, a new high-throughput, energy-efficient, and low-latency SRAM-based TRNG that can sustain continuous operation. TuRaN leverages the key observation that accessing SRAM cells results in random access failures when the supply voltage is reduced below the manufacturer-recommended supply voltage. TuRaN generates random numbers at high throughput by repeatedly accessing SRAM cells with reduced supply voltage and post-processing the resulting random faults using the SHA-256 hash function. To demonstrate the feasibility of TuRaN, we conduct SPICE simulations on different process nodes and analyze the potential of access failure for use as an entropy source. We verify and support our simulation results by conducting real-world experiments on two commercial off-the-shelf FPGA boards. We evaluate the quality of the random numbers generated by TuRaN using the widely-adopted NIST standard randomness tests and observe that TuRaN passes all tests. TuRaN generates true random numbers with (i) an average (maximum) throughput of 1.6Gbps (1.812Gbps), (ii) 0.11nJ/bit energy consumption, and (iii) 278.46us latency