Multiple simultaneous Wi-Fi measurements in fingerprinting indoor positioning

The accuracy of fingerprinting-based positioning methods accuracy is limited by the fluctuations in the radio signal intensity mainly due to reflections, refractions, and multipath interference, among other factors. We consider that the fluctuations (often modelled as a Gaussian process for simplification purposes) can be minimized by exploiting the richness of multiple signals collected simultaneously through independent network interfaces. This paper introduces an analysis of Wi-Fi signals' statistics using simultaneous measurements which shows that RSSI values obtained from independent devices are not highly correlated. The low correlation between Wi-Fi interfaces might be exploited to improve the positioning accuracy. The validation of the proposed fingerprinting approach in a real scenario shows that the mean and maximum error in positioning can be reduced by more than 40% when five Wi-Fi interfaces are simultaneously used for fingerprinting.This work has been supported by COMPETE: POCI-01- 0145-FEDER-007043 and FCT—Fundação para a Ciência e Tecnologia within the scope of project UID/CEC/00319/2013, by the Portugal Incentive System for Research and Technological Development in the scope of the projects in co- promotion no 002814/2015 (iFACTORY 2015-2018), and by the José Castillejo mobility grant (CAS16/00072).info:eu-repo/semantics/publishedVersio

Multidevice Map-Constrained Fingerprint-Based Indoor Positioning Using 3-D Ray Tracing

This paper studies the use of deterministic channel modelling through 3D Ray Tracing (RT) for constructing deviceindependent radiomaps for Wi–Fi RSSI–based fingerprinting indoor positioning, applicable to different devices. Device heterogeneity constitutes a limitation in fingerprint–based approaches and also constructing radiomaps through extensive in-situ measurement campaigns is laborious and time-consuming even with a single device let alone the need for radiomaps constructed using multiple different devices. This work tackles both challenges through the use of 3D RT for radiomap generation in conjunction with data calibration using a small set of device-specific measurements to make the radiomap device–independent. The efficiency of this approach is evaluated using simulations and measurements in terms of the time spent to generate the radiomap, the amount of device-specific data required for calibration and in terms of the achievable positioning accuracy. Potential accuracy improvements in the RT-based indoor positioning processes are further investigated, by studying the use of map constraints into the algorithm in the form of a–priori probabilities. In this approach, a Route Probability Factor (RPF), which reflects the likelihood of a user being in various locations inside the environment is used. The outcome of the evaluation process which includes a study of different RPF distributions, indicates the validity of the approach, demonstrated by a reduction in the positioning error for various devices. The versatility of this approach is also demonstrated for different scenarios, different devices and by considering different device-handling conditions

Hybrid analog-digital processing system for amplitude-monopulse RSSI-based MiMo wifi direction-of-arrival estimation

We present a cost-effective hybrid analog digital system to estimate the Direction of Arrival (DoA) of WiFi signals. The processing in the analog domain is based on simple wellknown RADAR amplitude monopulse antenna techniques. Then, using the RSSI (Received Signal Strength Indicator) delivered by commercial MiMo WiFi cards, the DoA is estimated using the socalled digital monopulse function. Due to the hybrid analog digital architecture, the digital processing is extremely simple, so that DoA estimation is performed without using IQ data from specific hardware. The simplicity and robustness of the proposed hybrid analog digital MiMo architecture is demonstrated for the ISM 2.45GHz WiFi band. Also, the limitations with respect to multipath effects are studied in detail. As a proof of concept, an array of two MiMo WiFi DoA monopulse readers are distributed to localize the two-dimensional position of WiFi devices. This costeffective hybrid solution can be applied to all WiFi standards and other IoT narrowband radio protocols, such us Bluetooth Low Energy or Zigbee.This work was supported in part by the Spanish National Projects TEC2016-75934-C4-4-R, TEC2016-76465-C2-1-R and in part by Regional Seneca Project 19494/PI/14

Multimodal Sensor Data Integration for Indoor Positioning in Ambient-Assisted Living Environments

A reliable Indoor Positioning System (IPS) is a crucial part of the Ambient-Assisted Living (AAL) concept. The use of Wi-Fi fingerprinting techniques to determine the location of the user, based on the Received Signal Strength Indication (RSSI) mapping, avoids the need to deploy a dedicated positioning infrastructure but comes with its own issues. Heterogeneity of devices and RSSI variability in space and time due to environment changing conditions pose a challenge to positioning systems based on this technique. The primary purpose of this research is to examine the viability of leveraging other sensors in aiding the positioning system to provide more accurate predictions. In particular, the experiments presented in this work show that Inertial Motion Units (IMU), which are present by default in smart devices such as smartphones or smartwatches, can increase the performance of Indoor Positioning Systems in AAL environments. Furthermore, this paper assesses a set of techniques to predict the future performance of the positioning system based on the training data, as well as complementary strategies such as data scaling and the use of consecutive Wi-Fi scanning to further improve the reliability of the IPS predictions. This research shows that a robust positioning estimation can be derived from such strategies

A State-of-the-Art Survey of Indoor Positioning and Navigation Systems and Technologies

The research and use of positioning and navigation technologies outdoors has seen a steady and exponential growth. Based on this success, there have been attempts to implement these technologies indoors, leading to numerous studies. Most of the algorithms, techniques and technologies used have been implemented outdoors. However, how they fare indoors is different altogether. Thus, several technologies have been proposed and implemented to improve positioning and navigation indoors. Among them are Infrared (IR), Ultrasound, Audible Sound, Magnetic, Optical and Vision, Radio Frequency (RF), Visible Light, Pedestrian Dead Reckoning (PDR)/Inertial Navigation System (INS) and Hybrid. The RF technologies include Bluetooth, Ultra-wideband (UWB), Wireless Sensor Network (WSN), Wireless Local Area Network (WLAN), Radio-Frequency Identification (RFID) and Near Field Communication (NFC). In addition, positioning techniques applied in indoor positioning systems include the signal properties and positioning algorithms. The prevalent signal properties are Angle of Arrival (AOA), Time of Arrival (TOA), Time Difference of Arrival (TDOA) and Received Signal Strength Indication (RSSI), while the positioning algorithms are Triangulation, Trilateration, Proximity and Scene Analysis/ Fingerprinting. This paper presents a state-of-the-art survey of indoor positioning and navigation systems and technologies, and their use in various scenarios. It analyses distinct positioning technology metrics such as accuracy, complexity, cost, privacy, scalability and usability. This paper has profound implications for future studies of positioning and navigation