Supervisory Control and Analysis of Partially-observed Discrete Event Systems

Nowadays, a variety of real-world systems fall into discrete event systems (DES). In practical scenarios, due to facts like limited sensor technique, sensor failure, unstable network and even the intrusion of malicious agents, it might occur that some events are unobservable, multiple events are indistinguishable in observations, and observations of some events are nondeterministic. By considering various practical scenarios, increasing attention in the DES community has been paid to partially-observed DES, which in this thesis refer broadly to those DES with partial and/or unreliable observations. In this thesis, we focus on two topics of partially-observed DES, namely, supervisory control and analysis. The first topic includes two research directions in terms of system models. One is the supervisory control of DES with both unobservable and uncontrollable events, focusing on the forbidden state problem; the other is the supervisory control of DES vulnerable to sensor-reading disguising attacks (SD-attacks), which is also interpreted as DES with nondeterministic observations, addressing both the forbidden state problem and the liveness-enforcing problem. Petri nets (PN) are used as a reference formalism in this topic. First, we study the forbidden state problem in the framework of PN with both unobservable and uncontrollable transitions, assuming that unobservable transitions are uncontrollable. For ordinary PN subject to an admissible Generalized Mutual Exclusion Constraint (GMEC), an optimal on-line control policy with polynomial complexity is proposed provided that a particular subnet, called observation subnet, satisfies certain conditions in structure. It is then discussed how to obtain an optimal on-line control policy for PN subject to an arbitrary GMEC. Next, we still consider the forbidden state problem but in PN vulnerable to SD-attacks. Assuming the control specification in terms of a GMEC, we propose three methods to derive on-line control policies. The first two lead to an optimal policy but are computationally inefficient for large-size systems, while the third method computes a policy with timely response even for large-size systems but at the expense of optimality. Finally, we investigate the liveness-enforcing problem still assuming that the system is vulnerable to SD-attacks. In this problem, the plant is modelled as a bounded PN, which allows us to off-line compute a supervisor starting from constructing the reachability graph of the PN. Then, based on repeatedly computing a more restrictive liveness-enforcing supervisor under no attack and constructing a basic supervisor, an off-line method that synthesizes a liveness-enforcing supervisor tolerant to an SD-attack is proposed. In the second topic, we care about the verification of properties related to system security. Two properties are considered, i.e., fault-predictability and event-based opacity. The former is a property in the literature, characterizing the situation that the occurrence of any fault in a system is predictable, while the latter is a newly proposed property in the thesis, which describes the fact that secret events of a system cannot be revealed to an external observer within their critical horizons. In the case of fault-predictability, DES are modeled by labeled PN. A necessary and sufficient condition for fault-predictability is derived by characterizing the structure of the Predictor Graph. Furthermore, two rules are proposed to reduce the size of a PN, which allow us to analyze the fault-predictability of the original net by verifying that of the reduced net. When studying event-based opacity, we use deterministic finite-state automata as the reference formalism. Considering different scenarios, we propose four notions, namely, K-observation event-opacity, infinite-observation event-opacity, event-opacity and combinational event-opacity. Moreover, verifiers are proposed to analyze these properties

A branch and bound approach for the design of decentralized supervisors in Petri net models

The paper addresses the design of compact and maximally permissive decentralized supervisors for Petri nets, based on generalized mutual exclusion constraints. Decentralization constraints are formulated with respect to the net transitions, instructing each local supervisor to detect and disable transitions of its own control site only. A solution is characterized in terms of the states it allows and its feasibility is assessed by means of two separate tests, one checking the required behavioral properties (e.g., liveness, reversibility and controllability) of the induced reachability subgraph and the other ensuring the existence of a decentralized supervisor enforcing exactly the considered set of allowed states. The second test employs an integer linear programming formulation. Maximal permissivity is ensured by efficiently exploring the solution space using a branch and bound method that operates on the reachable states. Particular emphasis is posed on the obtainment of the controllability property, both in the structural and the behavioral interpretation

Petri net controllers for Generalized Mutual Exclusion Constraints with floor operators

In this paper a special type of nonlinear marking specifications called stair generalized mutual exclusion constraints (stair-GMECs) is defined. A stair-GMEC can be represented by an inequality whose left-hand is a linear combination of floor functions. Stair-GMECs have higher modeling power than classical GMECs and can model legal marking sets that cannot be defined by OR–AND GMECs. We propose two algorithms to enforce a stair-GMEC as a closed-loop net, in which the control structure is composed by a residue counter, remainder counters, and duplicate transitions. We also show that the proposed control structure is maximally permissive since it prevents all and only the illegal trajectories of a plant net. This approach can be applied to both bounded and unbounded nets. Several examples are proposed to illustrate the approach

Petri Nets at Modelling and Control of Discrete-Event Systems Containing Nondeterminism - Part 1

Discrete-Event Systems are discrete in nature, driven by discrete events. Petri Nets are one of the mostly used tools for their modelling and control synthesis. Place/Transitions Petri Nets, Timed Petri Nets, Controlled Petri Nets are suitable when a modelled object is deterministic. When the system model contains uncontrollable/unobservable transitions and unobservable/unmeasurable places or other failures, such kinds of Petri Nets are insufficient for the purpose. In such a case Labelled Petri Nets and/or Interpreted Petri Nets have to be used. Particularities and mutual differences of individual kinds of Petri Nets are pointed out and their applicability to modelling and control of Discrete-Event Systems are described and tested

Supervisor Synthesis for Discrete Event Systems under Partial Observation and Arbitrary Forbidden State Specifications

In this paper, we consider the forbidden state problem in discrete event systems modeled by partially observed and partially controlled Petri nets. Assuming that the reverse net of the uncontrollable subnet of the Petri net is structurally bounded, we compute a set of weakly forbidden markings from which forbidden markings can be reached by firing a sequence of uncontrollable/unobservable transitions. We then use reduced consistent markings to represent the set of consistent markings for Petri nets with structurally bounded unobservable subnets. We determine the control policy by checking if the firing of a certain controllable transition will lead to a subsequent reduced consistent marking that belongs to the set of weakly forbidden markings; if so, we disable the corresponding controllable transition. This approach is shown to be minimally restrictive in the sense that it only disables behavior that can potentially lead to a forbidden marking. The setting in this paper generalizes previous work by studying supervisory control for partially observed and partially controlled Petri nets with a general labeling function and a finite number of arbitrary forbidden states. In contrast, most previous work focuses on either labeling functions that assign a unique label to each observable transition or forbidden states that are represented using linear inequalities. More importantly, we demonstrate that, in general, the separation between observation and control (as considered in previous work) may not hold in our setting

On Minimum-time Control of Continuous Petri nets: Centralized and Decentralized Perspectives

Muchos sistemas artificiales, como los sistemas de manufactura, de logística, de telecomunicaciones o de tráfico, pueden ser vistos "de manera natural" como Sistemas Dinámicos de Eventos Discretos (DEDS). Desafortunadamente, cuando tienen grandes poblaciones, estos sistemas pueden sufrir del clásico problema de la explosión de estados. Con la intención de evitar este problema, se pueden aplicar técnicas de fluidificación, obteniendo una relajación fluida del modelo original discreto. Las redes de Petri continuas (CPNs) son una aproximación fluida de las redes de Petri discretas, un conocido formalismo para los DEDS. Una ventaja clave del empleo de las CPNs es que, a menudo, llevan a una substancial reducción del coste computacional. Esta tesis se centra en el control de Redes de Petri continuas temporizadas (TCPNs), donde las transiciones tienen una interpretación temporal asociada. Se asume que los sistemas siguen una semántica de servidores infinitos (velocidad variable) y que las acciones de control aplicables son la disminución de la velocidad del disparo de las transiciones. Se consideran dos interesantes problemas de control en esta tesis: 1) control del marcado objetivo, donde el objetivo es conducir el sistema (tan rápido como sea posible) desde un estado inicial a un estado final deseado, y es similar al problema de control set-point para cualquier sistema de estado continuo; 2) control del flujo óptimo, donde el objetivo es conducir el sistema a un flujo óptimo sin conocimiento a priori del estado final. En particular, estamos interesados en alcanzar el flujo máximo tan rápido como sea posible, lo cual suele ser deseable en la mayoría de sistemas prácticos. El problema de control del marcado objetivo se considera desde las perspectivas centralizada y descentralizada. Proponemos varios controladores centralizados en tiempo mínimo, y todos ellos están basados en una estrategia ON/OFF. Para algunas subclases, como las redes Choice-Free (CF), se garantiza la evolución en tiempo mínimo; mientras que para redes generales, los controladores propuestos son heurísticos. Respecto del problema de control descentralizado, proponemos en primer lugar un controlador descentralizado en tiempo mínimo para redes CF. Para redes generales, proponemos una aproximación distribuida del método Model Predictive Control (MPC); sin embargo en este método no se considera evolución en tiempo mínimo. El problema de control de flujo óptimo (en nuestro caso, flujo máximo) en tiempo mínimo se considera para redes CF. Proponemos un algoritmo heurístico en el que calculamos los "mejores" firing count vectors que llevan al sistema al flujo máximo, y aplicamos una estrategia de disparo ON/OFF. También demostramos que, debido a que las redes CF son persistentes, podemos reducir el tiempo que tarda en alcanzar el flujo máximo con algunos disparos adicionales. Los métodos de control propuestos se han implementado e integrado en una herramienta para Redes de Petri híbridas basada en Matlab, llamada SimHPN

Sixth Workshop and Tutorial on Practical Use of Coloured Petri Nets and the CPN Tools Aarhus, Denmark, October 24-26, 2005

This booklet contains the proceedings of the Sixth Workshop on Practical Use of Coloured Petri Nets and the CPN Tools, October 24-26, 2005. The workshop is organised by the CPN group at the Department of Computer Science, University of Aarhus, Denmark. The papers are also available in electronic form via the web pages: http://www.daimi.au.dk/CPnets/workshop0

An Efficient Siphon-Based Deadlock Prevention Policy for a Class of Generalized Petri Nets

We propose a new deadlock prevention policy for an important class of resource allocation systems (RASs) that appear in the modeling of flexible manufacturing systems (FMSs). The model of this class in terms of generalized Petri nets is, namely, S 4 PR. On the basis of recent structural analysis results related to the elementary siphons in generalized Petri nets on one hand and an efficient deadlock avoidance policy proposed for the class of conjunctive/disjunctive (C/D) RASs on the other hand, we show how one can generate monitors to be added to a net system such that all its strict minimal siphons are max -controlled and no insufficiently marked siphon is generated. Thereby, a new, simple, and more permissive liveness-enforcing supervisor synthesis method for S 4 PR is established

An approach to task coordination for hyperflexible robotic workcells

2014 - 2015The manufacturing industry is very diverse and covers a wide range of specific processes ranging from extracting minerals to assembly of very complex products such as planes or computers, with all intermediate processing steps in a long chain of industrial suppliers and customers. It is well know that the introduction of robots in manufacturing industries has many advantages. Basically, in relation to human labor, robots work to a constant level of quality. For example, waste, scrap and rework are minimized. Furthermore they can work in areas that are hazardous or unpleasant to humans. Robots are advantageous where strength is required, and in many applications they are also faster than humans. Also, in relation to special-purpose dedicated equipment, robots are more easily reprogrammed to cope with new products or changes in the design of existing ones. In the last 30-40 years, large enterprises in high-volume markets have managed to remain competitive and maintain qualified jobs by increasing their productivity with the incremental adoption and use of advanced ICT and robotics technologies. In the 70s, robots have been introduced for the automation of a wide spectrum of tasks such as: assembly of cars, white goods, electronic devices, machining of metal and plastic parts, and handling of workpieces and objects of all kinds. Robotics has thus soon become a synonym for competitive manufacturing and a key contributing technology for strengthening the economic base of Europe . So far, the automotive and electronics industries and their supply chains are the main users of robot systems and are accounting for more than 60% of the total annual robot sales. Robotic technologies have thus mainly been driven by the needs of these high-volume market industries. The degree of automation in the automotive industries is expected to increase in the future as robots will push the limits towards flexibility regarding faster change-over-times of different product types (through rapid programming generation schemes), capabilities to deal with tolerances (through an extensive use of sensors) and costs (by reducing customized work-cell installations and reuse of manufacturing equipment). There are numerous new fields of applications in which robot technology is not widespread today due to its lack of flexibility and high costs involved when dealing with varying lot sizes and variable product geometries. In such cases, hyper-flexible robotic work cells can help in providing flexibility to the system and making it adaptable to the different dynamic production requirements. Hyper-flexible robotic work cells, in fact, can be composed of sets of industrial robotic manipulators that cooperate to achieve the production step that characterize the work cell; they can be programmed and re-programmed to achieve a wide class of operations and they may result versatile to perform different kind of tasks Related key technology challenges for pursuing successful long-term industrial robot automation are introduced at three levels: basic technologies, robot components and systems integration. On a systems integration level, the main challenges lie in the development of methods and tools for instructing and synchronising the operation of a group of cooperative robots at the shop-floor. Furthermore, the development of the concept of hyper flexible manufacturing systems implies soon the availability of: consistent middleware for automation modules to seamlessly connect robots, peripheral devices and industrial IT systems without reprogramming everything (”plug-and-play”) . In this thesis both innovative and traditional industrial robot applications will be analyzed from the point of view of task coordination. In the modeling environment, contribution of this dissertation consists in presenting a new methodology to obtain a model oriented to the control the sequencing of the activities of a robotic hyperflexible cell. First a formal model using the Colored Modified Hybrid Petri Nets (CMHPN) is presented. An algorithm is provided to obtain an automatic synthesis of the CMHPN of a robotic cell with detail attention to aircraft industry. It is important to notice that the CMHPN is used to model the cell behaviour at a high level of abstraction. It models the activities of each cell component and its coordination by a supervisory system. As more, an object oriented approach and supervisory control are proposed to implement industrial automation control systems (based on Programmable Logic Controllers) to meet the new challenges of this field capability to implement applications involving widely distributed devices and high reuse of software components. Hence a method is proposed to implement both controllers and supervisors designed by Petri Nets on Programmable Logic Controllers (PLCs) using Object Oriented Programming (OOP). Finally preliminary results about a novel cyber-physical approach to the design of automated warehouse systems is presented. [edited by author]XIV n.s