Expressions for the nonlinear transmission performance of multi-mode optical fiber

We develop an analytical theory which allows us to identify the information spectral density limits of multimode optical fiber transmission systems. Our approach takes into account the Kerr-effect induced interactions of the propagating spatial modes and derives closed-form expressions for the spectral density of the corresponding nonlinear distortion. Experimental characterization results have confirmed the accuracy of the proposed models. Application of our theory in different FMF transmission scenarios has predicted a ~10% variation in total system throughput due to changes associated with inter-mode nonlinear interactions, in agreement with an observed 3dB increase in nonlinear noise power spectral density for a graded index four LP mode fiber

Optical Fibers for Space-Division Multiplexed Transmission and Networking

Single-mode fiber transmission can no longer satisfy exponentially growing capacity demand. Space-division multiplexing (SDM) appears to be the only way able to dramatically improve the transmission capacity, for which, novel optical fiber is one of the key technologies. Such fibers must possess the following characteristics: 1) high mode density per cross-sectional area and 2) low crosstalk or low modal differential group delay (DMGD) to reduce complexity of digital signal processing. In this dissertation, we explore the design and characterization of three kinds of fibers for SDM: few-mode fiber (FMF), few-mode multi-core fiber (FM-MCF) and coupled multi-core fiber (CMCF) as well as their applications in transmission and networking. For the ultra-high density need of SDM, we have proposed the FMMCF. It combines advantages of both the FMF and MCF. The challenge is the inter-core crosstalk of the high-order modes. By applying a hole-assisted structure and careful fiber design, the LP11 crosstalk has been suppressed down to -40dB per km. This allows separate transmission on LP01 and LP11 modes without penalty. In fact, a robust SDM transmission up to 200Tb/s has been achieved using this fiber. To overcome distributed modal crosstalk in conjunction with DMGD, supermodes in CMCFs have been proposed. The properties of supermodes were investigated using the coupled-mode theory. The immediate benefits include high mode density and large effective area. In supermode structures, core-to-core coupling is exploited to reduce modal crosstalk or minimize DMGD. In addition, higher-order supermodes have been discovered in CMCFs with few-mode cores. We show that higher-order supermodes in different waveguide array configurations can be strongly affected by angle-dependent couplings, leading to different modal fields. Analytical solutions are provided for linear, rectangular and ring arrays. Higher-order modes have been observed for the first time using S2 imaging method. Finally, we introduce FMF to gigabit-capable passive optical networks (GPON). By replacing the conventional splitter with a photonic lantern, upstream combining loss can be eliminated. Low crosstalk has been achieved by a customized mode-selective photonic lantern carefully coupled to the FMF. We have demonstrated the first few-mode GPON system with error-free performance over 20-km 3-mode transmission using a commercial GPON system carrying live Ethernet traffic. We then scale the 3-mode GPON system to 5-mode, which resulted in a 4dB net gain in power budget in comparison with current commercial single-mode GPON systems

Mode-division Multiplexed Transmission In Few-mode Fibers

As a promising candidate to break the single-mode fiber capacity limit, mode-division multiplexing (MDM) explores the spatial dimension to increase transmission capacity in fiberoptic communication. Two linear impairments, namely loss and multimode interference, present fundamental challenges to implementing MDM. In this dissertation, techniques to resolve these two issues are presented. To de-multiplex signals subject to multimode interference in MDM, Multiple-InputMultiple-Output (MIMO) processing using adaptive frequency-domain equalization (FDE) is proposed and investigated. Both simulations and experiments validate that FDE can reduce the algorithmic complexity significantly in comparison with the conventional time-domain equalization (TDE) while achieving similar performance as TDE. To further improve the performance of FDE, two modifications on traditional FDE algorithm are demonstrated. i) normalized adaptive FDE is applied to increase the convergence speed by 5 times; ii) masterslave carrier recovery is proposed to reduce the algorithmic complexity of phase estimation by number of modes. Although FDE can reduce the computational complexity of the MIMO processing, due to large mode group delay (MGD) of FMF link and block processing, the algorithm still requires enormous memory and high hardware complexity. In order to reduce the required tap length (RTL) of the equalizer, differential mode group delay compensated fiber (DMGDC) has been proposed. In this dissertation, the analytical expression for RTL is derived for DMGDC systems under the weak mode coupling assumption. Instead of depending on the overall MGD of the link iii in DMGD uncompensated (DMGDUC) systems, the RTL of DMGDC systems depend on the MGD of a single DMGDC fiber section. The theoretical and numerical results suggest that by using small compensation step-size, the RTL of DMGDC link can be reduced by 2 orders of magnitude compared to DMGDUC link. To compensate the loss of different modes, multimode EDFAs are presented with reconfigurable multimode pumps. By tuning the mode content of the multimode pump, modedependent gain (MDG) can be controlled and equalized. A proto-type FM-EDFA which could support 2 LP modes was constructed. The experimental results show that by using high order mode pumps, the modal gain difference can be reduced. By applying both multimode EDFA and equalization techniques, 26.4Tb/s MDM-WDM transmission was successfully demonstrated. A brief summary and several possible future research directions conclude this dissertation

Monolithic mode-selective few-mode multicore fiber multiplexers

With the capacity limits of standard single-mode optical fiber fast approaching, new technologies such as space-division multiplexing are required to avoid an Internet capacity crunch. Few-mode multicore fiber (FM-MCF) could allow for a two orders of magnitude increase in capacity by using the individual spatial modes in the different cores as unique data channels. We report the realization of a monolithic mode-selective few-mode multicore fiber multiplexer capable of addressing the individual modes of such a fiber. These compact multiplexers operate across the S + C + L telecommunications bands and were inscribed into a photonic chip using ultrafast laser inscription. They allow for the simultaneous multiplexing of the LP01, LP11a and LP11b modes of all cores in a 3-mode, 4-core fiber with excellent mode extinction ratios and low insertion losses. The devices are scalable to more modes and cores and therefore could represent an enabling technology for practical ultra-high capacity dense space-division multiplexing.Tis research was supported by the Australian Research Council (ARC) Centre of Excellence for Ultrahigh bandwidth Devices for Optical Systems (project number CE110001018) and was performed in part at the OptoFab node of the Australian National Fabrication Facility using Commonwealth and NSW State Government funding. N. Riesen was supported by an ARC Laureate Fellowship awarded to T. M. Monro (FL130100044). S. Gross was supported by an ARC Discovery Early Career Researcher Award (DE160100714) and a Macquarie University Research Fellowship

Mode Evolution in Fiber Based Devices for Optical Communication Systems

Space division multiplexing (SDM) is the most promising way of increasing the capacity of a single fiber. To enable the few mode fiber (FMF) or multi-mode fiber (MMF) transmission system, several major challenges have to be overcome. One is the urgent need of ideal mode multiplexer, the second is the perfect amplification for all spatial modes, another one is the modal delay spread (MDS) due to group velocity difference of spatial modes. The main subject of this dissertation is to model, fabricate and characterize the mode multiplexer for FMF transmission. First, we designed a novel resonant mode coupler (structured directional coupler pair). After that, we studied the adiabatic mode multiplexer (photonic lantern). 6-mode photonic lantern using graded-index (GI) MMFs is proposed and demonstrated, which alleviates the adiabatic require-ment and improves mode selectivity. Then, 10-mode photonic lantern is demonstrated using novel double cladding micro-structured drilling-hole preform, which alleviates the adiabatic requirement and demonstrate a feasible way to scale up the lantern modes. Also, multi-mode photonic lantern is studied for high order input modes. In addition, for the perfect amplification of the modes, cladding pump method is demonstrated. The mode selective lantern designed and fabricated can be used for the characterization of few mode amplifier with swept wavelength interferometer (SWI). Also, we demonstrated the application of the use of the few mode amplifier for the turbulence-resisted preamplified receiver. Besides, for the reduction of MDS, the long period grating for introducing strong mode mixing is demonstrated

Monolithic mode-selective few-mode multicore fiber multiplexers

With the capacity limits of standard single-mode optical fiber fast approaching, new technologies such as space-division multiplexing are required to avoid an Internet capacity crunch. Few-mode multicore fiber (FM-MCF) could allow for a two orders of magnitude increase in capacity by using the individual spatial modes in the different cores as unique data channels. We report the realization of a monolithic mode-selective few-mode multicore fiber multiplexer capable of addressing the individual modes of such a fiber. These compact multiplexers operate across the S + C + L telecommunications bands and were inscribed into a photonic chip using ultrafast laser inscription. They allow for the simultaneous multiplexing of the LP⁰¹, LP₁₁ₐ and LP₁₁b modes of all cores in a 3-mode, 4-core fiber with excellent mode extinction ratios and low insertion losses. The devices are scalable to more modes and cores and therefore could represent an enabling technology for practical ultra-high capacity dense space-division multiplexing.Nicolas Riesen, Simon Gross, John D. Love, Yusuke Sasaki, Michael J. Withfor

Mode Coupling in Space-division Multiplexed Systems

Even though fiber-optic communication systems have been engineered to nearly approach the Shannon capacity limit, they still cannot meet the exponentially-growing bandwidth demand of the Internet. Space-division multiplexing (SDM) has attracted considerable attention in recent years due to its potential to address this capacity crunch. In SDM, the transmission channels support more than one spatial mode, each of which can provide the same capacity as a single-mode fiber. To make SDM practical, crosstalk among modes must be effectively managed. This dissertation presents three techniques for crosstalk management for SDM. In some cases such as intra-datacenter interconnects, even though mode crosstalk cannot be completely avoided, crosstalk among mode groups can be suppressed in properly-designed few-mode fibers to support mode group-multiplexed transmission. However, in most cases, mode coupling is unavoidable. In free-space optical (FSO) communication, mode coupling due to turbulence manifests as wavefront distortions. Since there is almost no modal dispersion in FSO, we demonstrate the use of few-mode pre-amplified receivers to mitigate the effect of turbulence without using adaptive optics. In fiber-optic communication, multi-mode fibers or long-haul few-mode fibers not only suffer from mode crosstalk but also large modal dispersion, which can only be compensated electronically using multiple-input-multiple-output (MIMO) digital signal processing (DSP). In this case, we take the counterintuitive approach of introducing strong mode coupling to reduce modal group delay and DSP complexity

Spatially integrated erbium-doped fiber amplifiers enabling space-division multiplexing

L'augmentation exponentielle de la demande de bande passante pour les communications laisse présager une saturation prochaine de la capacité des réseaux de télécommunications qui devrait se matérialiser au cours de la prochaine décennie. En effet, la théorie de l’information prédit que les effets non linéaires dans les fibres monomodes limite la capacité de transmission de celles-ci et peu de gain à ce niveau peut être espéré des techniques traditionnelles de multiplexage développées et utilisées jusqu’à présent dans les systèmes à haut débit. La dimension spatiale du canal optique est proposée comme un nouveau degré de liberté qui peut être utilisé pour augmenter le nombre de canaux de transmission et, par conséquent, résoudre cette menace de «crise de capacité». Ainsi, inspirée par les techniques micro-ondes, la technique émergente appelée multiplexage spatial (SDM) est une technologie prometteuse pour la création de réseaux optiques de prochaine génération. Pour réaliser le SDM dans les liens de fibres optiques, il faut réexaminer tous les dispositifs intégrés, les équipements et les sous-systèmes. Parmi ces éléments, l'amplificateur optique SDM est critique, en particulier pour les systèmes de transmission pour les longues distances. En raison des excellentes caractéristiques de l'amplificateur à fibre dopée à l'erbium (EDFA) utilisé dans les systèmes actuels de pointe, l'EDFA est à nouveau un candidat de choix pour la mise en œuvre des amplificateurs SDM pratiques. Toutefois, étant donné que le SDM introduit une variation spatiale du champ dans le plan transversal de la fibre, les amplificateurs à fibre dopée à l'erbium spatialement intégrés (SIEDFA) nécessitent une conception soignée. Dans cette thèse, nous examinons tout d'abord les progrès récents du SDM, en particulier les amplificateurs optiques SDM. Ensuite, nous identifions et discutons les principaux enjeux des SIEDFA qui exigent un examen scientifique. Suite à cela, la théorie des EDFA est brièvement présentée et une modélisation numérique pouvant être utilisée pour simuler les SIEDFA est proposée. Sur la base d'un outil de simulation fait maison, nous proposons une nouvelle conception des profils de dopage annulaire des fibres à quelques-modes dopées à l'erbium (ED-FMF) et nous évaluons numériquement la performance d’un amplificateur à un étage, avec fibre à dopage annulaire, à ainsi qu’un amplificateur à double étage pour les communications sur des fibres ne comportant que quelques modes. Par la suite, nous concevons des fibres dopées à l'erbium avec une gaine annulaire et multi-cœurs (ED-MCF). Nous avons évalué numériquement le recouvrement de la pompe avec les multiples cœurs de ces amplificateurs. En plus de la conception, nous fabriquons et caractérisons une fibre multi-cœurs à quelques modes dopées à l'erbium. Nous réalisons la première démonstration des amplificateurs à fibre optique spatialement intégrés incorporant de telles fibres dopées. Enfin, nous présentons les conclusions ainsi que les perspectives de cette recherche. La recherche et le développement des SIEDFA offriront d'énormes avantages non seulement pour les systèmes de transmission future SDM, mais aussi pour les systèmes de transmission monomode sur des fibres standards à un cœur car ils permettent de remplacer plusieurs amplificateurs par un amplificateur intégré.The exponential increase of communication bandwidth demand is giving rise to the so-called ‘capacity crunch’ expected to materialize within the next decade. Due to the nonlinear limit of the single mode fiber predicted by the information theory, all the state-of-the-art techniques which have so far been developed and utilized in order to extend the optical fiber communication capacity are exhausted. The spatial domain of the lightwave links is proposed as a new degree of freedom that can be employed to increase the number of transmission paths and, subsequently, overcome the looming ‘capacity crunch’. Therefore, the emerging technique named space-division multiplexing (SDM) is a promising candidate for creating next-generation optical networks. To realize SDM in optical fiber links, one needs to investigate novel spatially integrated devices, equipment, and subsystems. Among these elements, the SDM amplifier is a critical subsystem, in particular for the long-haul transmission system. Due to the excellent features of the erbium-doped fiber amplifier (EDFA) used in current state-of-the-art systems, the EDFA is again a prime candidate for implementing practical SDM amplifiers. However, since the SDM introduces a spatial variation of the field in the transverse plane of the optical fibers, spatially integrated erbium-doped fiber amplifiers (SIEDFA) require a careful design. In this thesis, we firstly review the recent progress in SDM, in particular, the SDM optical amplifiers. Next, we identify and discuss the key issues of SIEDFA that require scientific investigation. After that, the EDFA theory is briefly introduced and a corresponding numerical modeling that can be used for simulating the SIEDFA is proposed. Based on a home-made simulation tool, we propose a novel design of an annular based doping profile of few-mode erbium-doped fibers (FM-EDF) and numerically evaluate the performance of single stage as well as double-stage few-mode erbium-doped fiber amplifiers (FM-EDFA) based on such fibers. Afterward, we design annular-cladding erbium-doped multicore fibers (MC-EDF) and numerically evaluate the cladding pumped multicore erbium-doped fiber amplifier (MC-EDFA) based on these fibers as well. In addition to fiber design, we fabricate and characterize a multicore few-mode erbium-doped fiber (MC-FM-EDF), and perform the first demonstration of the spatially integrated optical fiber amplifiers incorporating such specialty doped fibers. Finally, we present the conclusions as well as the perspectives of this research. In general, the investigation and development of the SIEDFA will bring tremendous benefits not only for future SDM transmission systems but also for current state-of-the-art single-mode single-core transmission systems by replacing plural amplifiers by one integrated amplifier

Distributed radiofrequency signal processing based on space-division multiplexing fibers

[EN] Space-division multiplexing fibers emerged as a promising solution to overcome the imminent capacity crunch of conventional singlemode fiber networks. Despite these fibers were initially conceived as distribution media for long-haul high-capacity digital communications, they can be applied to a wide variety of scenarios including centralized radio access networks for wireless communications, data-center interconnects, Microwave Photonics signal processing and fiber sensing. Particular interest is raised by emerging communications paradigms, such as 5G and The Internet of Things, which require a full integration between the optical fiber and the wireless networks segments. Microwave Photonics, discipline that focuses on the generation, processing, control and distribution of radiofrequency signals by photonics means, is called to play a decisive role. One of the major challenges that Microwave Photonics has to overcome to satisfy next-generation communication demands relates to the reduction of size, weight and power consumption while assuring broadband seamless reconfigurability and stability. There is one revolutionary approach that has however been left untapped in finding innovative ways to address that challenge: exploiting space, the last available degree of freedom for optical multiplexing. In this Thesis, we propose to exploit the inherent parallelism of multicore and few-mode fibers to implement sampled discrete true time delay lines, providing, in a single optical fiber, a compact and efficient approach for both Microwave Photonics signal distribution and processing. For the multicore fiber approach, we study the influence of the refractive index profile of each heterogeneous core on the propagation characteristics as to feature specific group delay and chromatic dispersion values. We designed and fabricated two different heterogeneous trench-assisted 7-core fibers that behave as sampled true time delay lines. While one of them was fabricated by using 7 different preforms to feature a plenary performance, the other one employed a single preform with the aim of minimizing fabrication costs. In the case of few-mode fibers, we propose the implementation of a tunable true time delay line by means of a custom-designed fiber with a set of inscribed long period gratings that act as mode converters to properly tailor the sample group delays. We designed and fabricated a true time delay line on a 4-mode fiber by inscribing 3 long period gratings at specific positions along the fiber link. As a proof-of-concept validation, we experimentally demonstrated different Microwave Photonics signal processing functionalities implemented over both multicore and few-mode fiber approaches. This work opens the way towards the development of distributed signal processing for microwave and millimeter wave signals in a single optical fiber. These true time delay lines can be applied to a wide range of Information and Communication Technology paradigms besides fiber-wireless communications such as broadband satellite communications, distributed sensing, medical imaging, optical coherence tomography and quantum communications.[ES] La multiplexación por división espacial en fibras ópticas surgió como una solución prometedora al inminente colapso en la capacidad de las redes de fibra monomodo convencionales. Aunque estas fibras fueron concebidas inicialmente como medio de distribución en comunicaciones digitales de larga distancia y alta capacidad, pueden emplearse en una amplia variedad de escenarios, incluyendo redes de acceso radio centralizadas para comunicaciones inalámbricas, interconexiones en centros de datos, así como procesado de señal en Fotónica de Microondas y sensado en fibra. Los paradigmas de comunicaciones emergentes despiertan un interés particular, como 5G y el Internet de las Cosas, que requieren una integración total entre el segmento de red de fibra óptica y el inalámbrico. La Fotónica de Microondas, disciplina que se focaliza en la generación, procesado, control y distribución de señales de radiofrecuencia por medio de la fotónica, está destinada a jugar un papel decisivo. Uno de los mayores desafíos que la Fotónica de Microondas debe superar para satisfacer los requisitos de las nuevas generaciones de comunicaciones se basa en la reducción de tamaño, peso y consumo de potencia, mientras se garantiza reconfiguración y estabilidad de banda ancha. Encontramos aquí un enfoque revolucionario capaz de abordar este desafío de una manera innovadora que, sin embargo, no ha sido aprovechado en este contexto: la explotación del espacio, el último grado de libertad para multiplexación óptica. En esta Tesis, proponemos explotar el paralelismo inherente de las fibras ópticas multinúcleo y de pocos modos para implementar líneas de retardo en tiempo real muestreadas que proporcionan, en una sola fibra óptica, una solución compacta y eficiente tanto para distribución como para procesado de señales de Fotónica de Microondas. En el caso de fibras multinúcleo, estudiamos la influencia del perfil de índice de refracción de cada núcleo heterogéneo en las características de propagación para que exhiba unos valores concretos de retardo de grupo y dispersión cromática. Diseñamos y fabricamos dos fibras distintas de 7 núcleos con zanjas que se comportan como líneas de retardo en tiempo real muestreadas. Mientras que una de ellas se fabricó utilizando 7 preformas diferentes para garantizar un funcionamiento completo, la segunda se fabricó utilizando una única preforma con el objetivo de minimizar costes de fabricación. En el caso de fibras de pocos modos, proponemos la implementación de líneas de retardo en tiempo real sintonizables mediante el uso de una fibra específicamente diseñada y la inscripción de un conjunto de redes de difracción de periodo largo que actúan como conversores de modos para ajustar adecuadamente el retardo de grupo de las muestras. Diseñamos y fabricamos una línea de retardo en tiempo real en una fibra de 4 modos mediante la inscripción de 3 redes de difracción de periodo largo en posiciones concretas a lo largo de enlace de fibra. Como validación de prueba de concepto, demostramos experimentalmente diferentes funcionalidades de procesado de señal de Fotónica de Microondas implementadas en fibras multinúcleo y de pocos modos. Este trabajo abre el camino hacia el desarrollo del procesado de señal distribuido para señales de microondas y ondas milimétricas en una única fibra óptica. Además, las líneas de retardo en tiempo real desarrolladas pueden aplicarse a una amplia variedad de paradigmas de Tecnologías de la Información y Comunicaciones más allá de las comunicaciones radio sobre fibra, como es el caso de las comunicaciones de banda ancha por satélite, el sensado distribuido, la imagen médica, la tomografía óptica coherente y las comunicaciones cuánticas.[CA] La multiplexació per divisió espacial en fibres òptiques va sorgir com una solució prometedora a l'imminent col·lapse en la capacitat de les xarxes de fibra monomode convencionals. Encara que estes fibres foren concebudes inicialment com a mitjà de distribució en comunicacions digitals de llarga distància i alta capacitat, poden emprar-se en una àmplia varietat d'escenaris, incloent xarxes d'accés radio centralitzades per a comunicacions sense fils, interconnexions en centres de dades, així com processat de senyal en Fotònica de Microones i sensat en fibra. Els paradigmes de comunicacions emergents desperten un interès particular, com el 5G i la Internet de les Coses, que requereixen una integració total entre els segments de xarxa de fibra òptica i el de sense fils. La Fotònica de Microones, disciplina que es focalitza en la generació, processat, control i distribució de senyals de radiofreqüència per mitjà de la fotònica, està destinada a jugar un paper decisiu. Un dels majors desafiaments que la Fotònica de Microones ha de superar per satisfer els requisits de les noves generacions de comunicacions es basa en la reducció de grandària, pes i consum de potència, mentre es garanteix reconfiguració i estabilitat de banda ampla Trobem ací un enfocament revolucionari capaç d'abordar aquest desafiament d'una manera innovadora que, no obstant això, no ha sigut aprofitat encara en este context: la explotació de l'espai, l'últim grau de llibertat per a multiplexat òptic. En aquesta Tesi, proposem explotar el paral·lelisme inherent de les fibres òptiques multinucli i de pocs modes per a implementar línies de retard en temps real de mostres discretes que proporcionen, en una sola fibra òptica, una solució compacta i eficient tant per a distribució com per a processat de senyals de Fotònica de Microones. En el cas de fibres multinucli, estudiem la influència del perfil d'índex de refracció de cada nucli heterogeni en les característiques de propagació perquè exhibisca uns valors concrets de retard de grup i dispersió cromàtica. Dissenyem i fabriquem dues fibres distintes de 7 nuclis amb rases que es comporten com a línies de retard en temps real mostrejades. Mentre que una d'elles es va fabricar utilitzant 7 preformes diferents per a garantir un funcionament complet, la segona va fabricar-se utilitzant una única preforma amb l'objectiu de minimitzar costos de fabricació. En el cas de fibres de pocs modes, proposem la implementació de línies de retard en temps real sintonitzables mitjançant l'ús d'una fibra específicament dissenyada i la inscripció d'un conjunt de xarxes de difracció de període llarg que actuen com a convertidors de modes per tal d'ajustar adequadament el retard de grup de les mostres. Dissenyem i fabriquem una línia de retard en temps real en una fibra de 4 modes mitjançant la inscripció de 3 xarxes de difracció de període llarg en posicions concretes al llarg de l'enllaç de fibra. Com a validació de proba de concepte, demostrem experimentalment diferents funcionalitats de processat de senyal de Fotònica de Microones implementades en fibres multinucli i de pocs modes. Aquest treball obri el camí cap al desenvolupament del processat de senyal distribuït per a senyals de microones i ones mil·limètriques en una única fibra òptica. A més, aquestes línies de retard en temps real poden aplicar-se a una àmplia varietat de paradigmes de Tecnologies de la Informació i Comunicacions més enllà de les comunicacions radio sobre fibra, com es el cas de les comunicacions de banda ampla per satèl·lit, el sensat distribuït, la imatge mèdica, la tomografia òptica coherent i les comunicacions quàntiques.Agradezco al Ministerio de Economía y Competitividad del Gobierno de España por la financiación recibida mediante la ayuda FPI.García Cortijo, S. (2020). Distributed radiofrequency signal processing based on space-division multiplexing fibers [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/147858TESI

Study and Control of Nonlinearity in Large-Mode-Area Fibers.

Practical advantages and high power of fiber lasers make them important in many scientific and industrial applications. However, relatively small mode-area and long propagation-length in an optical fiber also enhances the nonlinear interactions, posing certain limits on achievable average and peak powers in fiber lasers. In this dissertation, we explore such nonlinear effects and their control in CCC fibers, a practically important type of large-core effectively-single-mode fibers. Many applications require short wavelengths. We study use of four-wave-mixing (FWM) for wavelength conversion in CCC fibers. Our theoretical analysis shows that under proper conditions CCC fibers can be used for efficient and high-power wavelength conversion from ~1µm to yellow-red visible wavelengths. We study use of spectral filtering properties of CCC fibers for suppressing stimulated Raman scattering (SRS). SRS suppression has been experimentally achieved in two types of spectrally-tailored CCC fibers, demonstrating an additional degree of design freedom, combining core-size scalability and SRS suppression. Average powers in large-core amplifying fibers are limited by the thermally induced transverse mode instability (TMI). We show that TMI is essentially a two-beam coupling process, causing stimulated scattering from the fundamental to higher-order modes. We show that increasing higher-order mode suppression in CCC fibers increases TMI threshold power. CCC fibers are low-birefringence fibers, in which fiber coiling and twisting produces externally induced linear and circular birefringence. Presence of the later complicates nonlinear polarization evolution (NPE) at high peak powers, which can degrade polarization preservation at the amplifier or laser output. Our experimental and theoretical analysis shows that with proper signal excitation and fiber packaging conditions linear output polarization can be maintained under a wide range of output peak powers. Additionally, this dissertation also includes a study of some design aspects of large-core polygonal-CCC fibers, directly related to fiber modal properties used in controlling nonlinear interactions. Results of this work are important for using CCC, as well as other types of flexible (i.e. non-rod type) effectively-single-mode fibers, in high power and energy fiber lasers.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116668/1/andrehu_1.pd