Shape manipulation using physically based wire deformations

This paper develops an efficient, physically based shape manipulation technique. It defines a 3D model with profile curves, and uses spine curves generated from the profile curves to control the motion and global shape of 3D models. Profile and spine curves are changed into profile and spine wires by specifying proper material and geometric properties together with external forces. The underlying physics is introduced to deform profile and spine wires through the closed form solution to ordinary differential equations for axial and bending deformations. With the proposed approach, global shape changes are achieved through manipulating spine wires, and local surface details are created by deforming profile wires. A number of examples are presented to demonstrate the applications of our proposed approach in shape manipulation

Learning to Navigate Cloth using Haptics

We present a controller that allows an arm-like manipulator to navigate deformable cloth garments in simulation through the use of haptic information. The main challenge of such a controller is to avoid getting tangled in, tearing or punching through the deforming cloth. Our controller aggregates force information from a number of haptic-sensing spheres all along the manipulator for guidance. Based on haptic forces, each individual sphere updates its target location, and the conflicts that arise between this set of desired positions is resolved by solving an inverse kinematic problem with constraints. Reinforcement learning is used to train the controller for a single haptic-sensing sphere, where a training run is terminated (and thus penalized) when large forces are detected due to contact between the sphere and a simplified model of the cloth. In simulation, we demonstrate successful navigation of a robotic arm through a variety of garments, including an isolated sleeve, a jacket, a shirt, and shorts. Our controller out-performs two baseline controllers: one without haptics and another that was trained based on large forces between the sphere and cloth, but without early termination.Comment: Supplementary video available at https://youtu.be/iHqwZPKVd4A. Related publications http://www.cc.gatech.edu/~karenliu/Robotic_dressing.htm

Automatic generation of dynamic skin deformation for animated characters

© 2018 by the authors. Since non-automatic rigging requires heavy human involvements, and various automatic rigging algorithms are less efficient in terms of computational efficiency, especially for current curve-based skin deformation methods, identifying the iso-parametric curves and creating the animation skeleton requires tedious and time-consuming manual work. Although several automatic rigging methods have been developed, but they do not aim at curve-based models. To tackle this issue, this paper proposes a new rigging algorithm for automatic generation of dynamic skin deformation to quickly identify iso-parametric curves and create an animation skeleton in a few milliseconds, which can be seamlessly used in curve-based skin deformation methods to make the rigging process fast enough for highly efficient computer animation applications

A Deformable Model for Magnetic Vortex Pinning

A two-parameter analytical model of the magnetic vortex in a thin disk of soft magnetic material is constructed. The model is capable of describing the change in evolution of net vortex state magnetization and of core position when the vortex core interacts with a magnetic pinning site. The model employs a piecewise, physically continuous, magnetization distribution obtained by the merger of two extensively used one-parameter analytical models of the vortex state in a disk. Through comparison to numerical simulations of ideal disks with and without pinning sites, the model is found to accurately predict the magnetization, vortex position, hysteretic transitions, and 2-D displacement of the vortex in the presence of pinning sites. The model will be applicable to the quantitative determination of vortex pinning energies from measurements of magnetization.Comment: 27 pages, 7 figures, including supplementary information, ancillary files:3 supplementary movie

RECREATING AND SIMULATING DIGITAL COSTUMES FROM A STAGE PRODUCTION OF \u3ci\u3eMEDEA\u3c/i\u3e

This thesis investigates a technique to effectively construct and simulate costumes from a stage production Medea, in a dynamic cloth simulation application like Maya\u27s nDynamics. This was done by using data collected from real-world fabric tests and costume construction in the theatre\u27s costume studio. Fabric tests were conducted and recorded, by testing costume fabrics for drape and behavior with two collision objects. These tests were recreated digitally in Maya to derive appropriate parameters for the digital fabric, by comparing with the original reference. Basic mannequin models were created using the actors\u27 measurements and skeleton-rigged to enable animation. The costumes were then modeled and constrained according to the construction process observed in the costume studio to achieve the same style and stitch as the real costumes. Scenes selected and recorded from Medea were used as reference to animate the actors\u27 models. The costumes were assigned the parameters derived from the fabric tests to produce the simulations. Finally, the scenes were lit and rendered out to obtain the final videos which were compared to the original recordings to ascertain the accuracy of simulation. By obtaining and refining simulation parameters from simple fabric collision tests, and modeling the digital costumes following the procedures derived from real-life costume construction, realistic costume simulation was achieved

Physically-based Muscles and Fibers Modeling from Superficial Patches.

We propose a novel approach for the generation of volumetric muscle primitives and their associated fiber field, suitable for simulation in computer animation. Muscles are notoriously difficult to sculpt because of their complex shapes and fiber architecture, therefore often requiring trained artists to render anatomical details. Moreover, physics simulation requires these geometries to be modeled in an intersection-free rest state and to have a spatially-varying fiber field to support contraction with anisotropic material models. Inspired by the principles of computational design, we satisfy these requirements by generating muscle primitives automatically, complete with tendons and fiber fields, using physics based simulation of inflatable 3D patches which are user-defined on the external mesh of a character