Communication Subsystems for Emerging Wireless Technologies

The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

The relationship between choice of spectrum sensing device and secondary-user intrusion in database-driven cognitive radio systems

As radios in future wireless systems become more flexible and reconfigurable whilst available radio spectrum becomes scarce, the possibility of using TV White Space devices (WSD) as secondary users in the TV Broadcast Bands (without causing harmful interference to licensed incumbents) becomes ever more attractive. Cognitive Radio encompasses a number of technologies which enable adaptive self-programming of systems at different levels to provide more effective use of the increasingly congested radio spectrum. Cognitive Radio has the potential to use spectrum allocated to TV services, which is not actually being used by these services, without causing disruptive interference to licensed users by using channel selection aided by use of appropriate propagation modelling in TV White Spaces.The main purpose of this thesis is to explore the potential of the Cognitive Radio concept to provide additional bandwidth and improved efficiency to help accelerate the development and acceptance of Cognitive Radio technology. Specifically, firstly: three main classes of spectrum sensing techniques (Energy Detection, Matched Filtering and Cyclostationary Feature Detection) have compare in terms of time and spectrum resources consumed, required prior knowledge and complexity, ranking the three classes according to accuracy and performance. Secondly, investigate spectrum occupancy of the UHF TV band in the frequency range from 470 to 862 MHz by undertaking spectrum occupancy measurements in different locations around the Hull area in the UK, using two different receiver devices; a low cost Software-Defined Radio device and a laboratory-quality spectrum analyser. Thirdly, investigate the best propagation model among three propagation models (Extended-Hata, Davidson-Hata and Egli) for use in the TV band, whilst also finding the optimum terrain data resolution to use (1000, 100 or 30 m). it compares modelled results with the previously-mentioned practical measurements and then describe how such models can be integrated into a database-driven tool for Cognitive Radio channel selection within the TV White Space environment. Fourthly, create a flexible simulation system for creating a TV White Space database by using different propagation models. Finally, design a flexible system which uses a combination of Geolocation Database and Spectrum Sensing in the TV band, comparing the performance of two spectrum analysers (Agilent E4407B and Agilent EXA N9010A) with that of a low cost Software-Defined Radio in the real radio environment. The results shows that white space devices can be designed using SDRs based on the Realtek RTL2832U chip (RTL-SDR), combined with a geolocation database for identifying the primary user in the specific location in a cost-effective manner. Furthermore it is shown that improving the sensitivity of RTL-SDR will affect the accuracy and performance of the WSD

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

TV white space and LTE network optimization toward energy efficiency in suburban and rural scenarios

The radio spectrum is a limited resource. Demand for wireless communication services is increasing exponentially, stressing the availability of radio spectrum to accommodate new services. TV white space (TVWS) technologies allow a dynamic usage of the spectrum. These technologies provide wireless connectivity, in the channels of the very high frequency and ultra high frequency television broadcasting bands. In this paper, we investigate and compare the coverage range, network capacity, and network energy efficiency for TVWS technologies and LTE. We consider Ghent, Belgium, and Boyeros, Havana, Cuba, to evaluate a realistic outdoor suburban and rural area, respectively. The comparison shows that TVWS networks have an energy efficiency 9-12 times higher than LTE networks

IoT-based management platform for real-time spectrum and energy optimization of broadcasting networks

We investigate the feasibility of Internet of Things (IoT) technology to monitor and improve the energy efficiency and spectrum usage efficiency of broadcasting networks in the Ultra-High Frequency (UHF) band. Traditional broadcasting networks are designed with a fixed radiated power to guarantee a certain service availability. However, excessive fading margins often lead to inefficient spectrum usage, higher interference, and power consumption. We present an IoT-based management platform capable of dynamically adjusting the broadcasting network radiated power according to the current propagation conditions. We assess the performance and benchmark two IoT solutions (i.e., LoRa and NB-IoT). By means of the IoT management platform the broadcasting network with adaptive radiated power reduces the power consumption by 15% to 16.3% and increases the spectrum usage efficiency by 32% to 35% (depending on the IoT platform). The IoT feedback loop power consumption represents less than 2% of the system power consumption. In addition, white space spectrum availability for secondary wireless telecommunications services is increased by 34% during 90% of the time

Measurement and Modelling of the Propagation Channel between Low Height Terminals

The evaluation of communication systems with low-height terminals requires path loss models that are applicable to low-height links. For the terminology low-height, the range 0.5 (mobile-) to 3m (fixed-node) above ground is considered. Herein, empirical non-time-dispersive propagation models for relaying systems with low-height terminals are proposed. The models consist of line-of-sight and non-line-of-sight branches. Single- and two-slope modelling approaches were examined. The models take into account the effect of frequency, transmitter and receiver height, and environment. They are complemented by shadowing and fast-fading distribution and correlation statistics. The performance of the models in producing accurate estimations is evaluated by comparison with sets of independent data